Logitech PRO X SUPERLIGHT 2 DEX Setup Guide

Package Contents

The package includes the following items:

• 1 Mouse
• 2 Optional grip tape
• 3 Receiver (installed in extension adapter)
• 4 USB charging and data cable
• 5 Surface preparation cloth
• 6 Optional POWERPLAY aperture door with PTFE foot

Mouse Features

The PRO X SUPERLIGHT 2 DEX mouse features:

• 1 Left Click
• 2 Right Click
• 3 Middle Click/Scroll
• 4 Browser Back
• 5 Browser Forward
• 6 Power LED indicator
• 7 USB charging/data port
• 8 Power on/off switch
• 9 POWERPLAY Aperture door

Setup

1. Plug the charging/data cable into your PC. Then, plug the extension adapter and receiver into the charging/data cable.
2. Turn on the mouse using the power switch.

To configure mouse settings such as DPI or report rate, download the G HUB software from logitechG.com/GHUB.

For optimal wireless performance, use the mouse within 20 cm of the receiver and more than 2 m away from sources of 2.4 GHz interference (such as Wi-Fi routers).

To install optional grip tape:

1. First, clean the surface of the mouse with the provided surface preparation cloth to remove any oil or dust.
2. Carefully align the grip tape to the mouse surfaces and apply.

Storing the Receiver and Using POWERPLAY:

The USB receiver can be stored inside the mouse by removing the POWERPLAY aperture door. This helps prevent the receiver from being lost when using the mouse with the Logitech G POWERPLAY wireless charging system. Removing the default aperture door also allows the installation of the optional aperture door with a PTFE foot.