VIMAR 01504.2 Line-Field Coupler Installation Guide

Installation Guide for VIMAR models including: 01504.2 Line-Field Coupler, 01504.2, Line-Field Coupler

BUILDING AUTOMATION - download.vimar.com

5 Device frontend 3. Device frontend Fig. 2: Front view 01504.2 Bus State Traffic Function LINE COUPLER Main Sub GA PA Main Sub 1 3 5 7 C 2 4 6 A B D 1 Bus state main line LED

BUILDING AUTOMATION - Vimar

8 ETS-Parameters line coupler 6.2 General ETS-Text Selection [Factory default] Comment Fallback time for manual operation 10 min, 1 hour, 4 hours, 8 hours

File Info : application/pdf, 14 Pages, 888.36KB

ZIS 01504.92388.2EN MI

Installer manual
01504.2 Line/Field coupler KNX standard
BUILDING AUTOMATION

Contents

1. Product description .................................................................................................................................... 4
2. KNX topology .......................................................................................................................................... 4
3. Device frontend ....................................................................................................................................... 5 3.1 Installation example .................................................................................................................................... 6
4. Operational description .............................................................................................................................. 6 4.1 Normal mode ............................................................................................................................................. 6 4.2 Program mode .......................................................................................................................................... 6 4.3 Function button .......................................................................................................................................... 6
4.3.1 Manual function ............................................................................................................................................. 6 4.3.2 Factory reset ................................................................................................................................................ 6
5. Application description line coupler ......................................................................................................... 7
6. ETS-Parameters line coupler ..................................................................................................................... 7 6.1 Settings ................................................................................................................................................... 7 6.2 General ................................................................................................................................................... 8 6.3 Main line ................................................................................................................................................... 8 6.4 Sub line ................................................................................................................................................... 8
7. Application description line repeater ......................................................................................................... 10
8. ETS-Parameters line repeater .................................................................................................................. 11 8.1 Settings ................................................................................................................................................... 11 8.2 General ................................................................................................................................................... 11 8.3 Main line ................................................................................................................................................... 12 8.4 Sub line ................................................................................................................................................... 13

Product description - KNX topology
1. 01504.2 product description
The 01504.2 media coupling device can be used as a line coupler, as a backbone coupler or as a line repeater. The basic functionality of the 01504.2 is coupling a KNX TP main line with a KNX TP sub line. Providing galvanic isolation between the two connected lines it enables a data connection between the upper line (main line or backbone) and the lower line. Due to its flexibility the coupler can be used as a line coupler to connect a sub line to a main line or as a backbone coupler to connect a main line to a backbone line. The main task of the 01504.2 is to filter the traffic according to the installation place in the hierarchy (individually addressed telegrams, in this document named Physical telegrams) or according to the built in filter tables for group oriented communication (Group telegrams). Compared to other similar products the 01504.2 provides outstanding features, for example its support of long messages (up to 240 byte APDU length) and a configurable one button activation of the "Manual Function" (transmit all telegrams, transmit Physical telegrams or transmit Group telegrams).This functionality is helpful during installation, during run time and for trouble shooting. To easily identify common communication problems due to bus load or retransmissions on both lines the high informative 6 duo LED display shows the bus status on each line accurately. The 01504.2 is also able to link two lines for data transfer. As a line repeater the 01504.2 still provides galvanic isolation between the connected lines. Result is up to four lines can form a single sub line with up to three line repeaters used after the line coupler. Each sub line segment requires its own KNX power supply unit.

2. KNX topology

ML
01504.2

01504.2 LINE COUPLER

Bus State Main
Traffic

Sub

Function

Main

Sub

SL
ML
01504.2

01504.2

LINE COUPLER

Bus State Main
Traffic

Sub

Function

Main

Sub

SL
NOT ALLOWED

ML: Main line SL: Sub line BC: Backbone coupler LC: Line coupler R: Repeater BD: Bus devices

ML
01504.2

01504.2

LINE COUPLER

Bus State Main
Traffic

Sub

Function

Main

Sub

01504.2

LINE COUPLER

Bus State Main
Traffic

Sub

Function

Main

Sub

01504.2

LINE COUPLER

Bus State Main
Traffic

Sub

Function

Main

Sub

01504.2

LINE COUPLER

Bus State Main
Traffic

Sub

Function

Main

Sub

NOT ALLOWED

Please note:
Commissioning at delivery status means: · All telegrams are blocked because the filter table is not defined · The fallback time after manual operation is 120 min · The physical address is 15.15.0

Fig. 1: Topology

Device frontend
3. Device frontend

01504.2

LINE COUPLER

Bus State

Main Sub

Traffic

Function

Main

Sub

1 Bus state main line LED 2 Bus state sub line LED 3 Bus traffic main line LED 4 Bus traffic sub line LED 5 Group address filter table status LED 6 Physical address filtering status LED 7 Programming LED
A Function button B Program button C KNX main line D KNX sub line

C
3.1 Installation example

D
Fig. 2: Front view

01501.2 POWER SUPPLY UNIT

120-240V 50/60Hz 360-220mA

KNX 30V AUX 30V

-5°C+ +45°C I KNX + I AUX 640mA

mains overload

AUX 30V

KNX 30V

01501.2 POWER SUPPLY UNIT

120-240V 50/60Hz 360-220mA

KNX 30V AUX 30V

-5°C+ +45°C I KNX + I AUX 640mA

mains overload

AUX 30V

KNX 30V

01504.2

LINE COUPLER

Bus State
Main
Traffic

Sub

Function

Main

Sub

Fig. 3: Connections

sub line main line
5

Operational description
4. Operational description
According either to the factory default settings or to the latest parameter settings (downloaded from ETS, also other tools) being in "Normal Mode" the 01504.2 operates as it is supposed to. The default configurations of the "Normal Mode" are set by the main line and the sub line parameters.

4.1 Normal mode
LED 1 Bus State Main LED 2 Bus State Sub LED 3 Traffic Main LED 4 Traffic Sub
LED 5 Group Address
LED 6 Physical Address
LED 7 Programming

Green

Red

Off: main line error or not connected On: main line OK

On: manual overwrite active.

Off: sub line not connected On: sub line OK

N.A.

Blinking: bus traffic on main line (only valid telegrams) Off: no traffic on main line

Blinking: transmission error on main line

Blinking: bus traffic on sub line (only valid telegrams) Off: no traffic on sub line

Blinking: transmission error on sub line

Routing of Group telegrams Off: main and sub different, On: Filter table is active

Block

On with Amber colour: route all

Routing of Physical telegrams Off: main and sub different, On: Filter table active

On: block

On with Amber colour: route all

N.A.

On: device in "Program Mode"

4.2 Program mode With the Programming button the device can be switched between "Normal Mode" and "Program Mode". To download the physical address to the device this function is essential. After the download the 01504.2 automatically returns to the "Normal Mode". Programming LED (7): Off: Normal Mode On: Program Mode
4.3 Function button The function button is used for two purposes, either to switch to "Manual Function" or to do a factory reset. Being in "Normal Mode" it depends on the duration of time the button is being pressed.
4.3.1 Manual function · Long press ( 3 sec) in "Normal Mode" The device activates the "Manual Function" and the LEDs change their status. Pressing the button again for some seconds deactivates the "Manual Function". After expiration of the Fallback time the device returns to "Normal Mode" automatically. To configure the "Manual Function" and set the Fallback time use the parameter tab "General".
Please note: The latest downloaded settings (parameters) and the filter table are still available after switching back from "Manual Function" to "Normal Mode".
4.3.2 Factory reset · Very long press ( 15 s) in "Normal Mode" A factory reset is carried out by pressing the button for about 15 seconds (LEDs 1,2,5,6 light with mixed colour). After release, pressing it again for some seconds resets all the parameters to factory default (incl. physical address). Subsequently, the LEDs change their status.

Application description line coupler - ETS-Parameters line coupler
5. Application description line coupler
With the coupler receiving physically addressed telegrams (Physical telegrams), for example during commissioning, it compares the physical address of the receiver with its own physical address to decide whether to route the telegrams or not. On receiving telegrams with group addresses (Group telegrams) the coupler proceeds in accordance with its parameter settings. At default setting the coupler only routes those telegrams whose group addresses have been entered in its filter table. In case of not receiving an acknowledgement after routing a telegram, due to a bus transmission error for example, the coupler repeats the telegram up to three times (depending on the corresponding parameter that is set by ETS). With the parameters ,,Repetitions if errors ..." this function can be adjusted separately for both connected lines. The default settings of these parameters should be retained.
6. ETS-Parameters line coupler
All screenshots in this document describing ETS parameters represent the Line/Field coupler´s database entry in the ETS5.
6.1 Settings In the properties window the basic settings of the Line/Field coupler can be adjusted and checked. Under the Settings tab the device name and the physical address (individual address) can be changed/downloaded to the device.

Fig. 4a: Properties/Settings

Fig. 4b: Properties/Information

When not already configured as "Line coupler", the application program for "Line coupler" has to be downloaded to the device. Under the Information tab this configuration can be changed by the menu "Change Application Program". After changing the configuration the filter table entries can be added manually. Also updating the application program can be done here.

ETS-Parameters line coupler
6.2 General

Fig. 5: General

ETS-Text Fallback time for manual operation
Manual function

Selection [Factory default]
10 min, 1 hour, 4 hours, 8 hours [1 hour]
disabled pass all telegrams pass physical telegrams pass group telegrams [pass all telegrams]

Comment After this time period the "Manual Function" is switched off automatically.
Telegram routing configuration for the "Manual Function".

6.3 Main line

Fig. 6: Main line configuration
Important note: The parameter "transmit all" for Group telegrams or Physical telegrams is intended only for testing purposes. This setting should not be used during normal operation.

ETS-Parameters line coupler

ETS-Text
Configuration
Group telegrams
Main group telegrams 14/15
Physical telegrams
Physical: Repetition when errors on main line
Group: Repetition when errors on main line
Telegram confirmations on line
Send confirmation on own telegrams

Selection [Factory default]
groups: filter, physical: block groups, physical: filter groups: route, physical: filter groups, physical: route configure [groups, physical: filter]
1. transmit all (not recommended) 2. block 3. filter [filter]
1. transmit all 2. block [transmit all]
1. transmit all (not recommended) 2. block 3. filter [filter]
1. no 2. normal 3. reduced [normal]
1. no 2. normal 3. reduced [normal]
1. if routed 2. always [if routed]
1. yes 2. no [no]

Comment
- Block: no telegram is routed. - Filter: only telegrams are routed which are entered in the filter table. - Route: the telegrams are routed. - Configure: the following parameters can be set manually. This parameter is to be set depending on the planed configuration.
1. All group telegrams are transmitted. 2. No group telegram is transmitted. 3. Only Group telegrams entered in the filter table are routed. ETS3/4 produces the filter table automatically.
1. Group telegrams with the sub group 14 or 15 (e.g. 14/1) are routed. 2. Group telegrams with the sub group 14 or 15 (e.g. 14/1) are not routed.
1. All Physical telegrams are transmitted. 2. No Physical telegram is transmitted. 3. Depending on the physical address only Physical telegrams are routed.
If a transmission error (e.g. due to missing receiver) is found after sending a Physical telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once
If a transmission error (e.g. due to missing receiver) is found after sending a Group telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once.
1. Only telegrams which are to be routed are confirmed on the main line (ACK).
2. Each telegram on the main line is confirmed (ACK).
1. Every telegram on the main line is confirmed with its own ACK (from the Line coupler).
2. No confirmation with own ACK See note below.

Please note: If the parameter "Send confirmation on own telegrams" is set to yes the line coupler will send an ACK systematically on any own routed telegram.

6.4 Sub line

Fig. 7: Sub line configuration
9

ETS-Parameters line coupler - Application description line repeater

ETS-Text
Configuration
Group telegrams
Sub group telegrams 14/15
Physical telegrams
Physical: Repetition if errors on the sub line occur
Group: Repetition if errors on the sub line occur
Telegram confirmations on line Send confirmation on own telegrams

Comment
- Block: no telegram is routed. - Filter: only telegrams are routed which are entered in the filter table. - Route: the telegrams are routed. - Configure: the following parameters can be set manually.
1. All group telegrams are transmitted. 2. No group telegram is transmitted. 3. Only group telegrams entered in the filter table are routed. ETS3/4 produces the filter table automatically
1. Group telegrams with the sub group 14 or 15 (e.g. 14/1) are routed. 2. Group telegrams with the sub group 14 or 15 (e.g. 14/1) are not routed.
1. All Physical telegrams are transmitted. 2. No Physical telegram is transmitted. 3. Depending on the physical address only Physical telegrams are routed.
If a transmission error (e.g. due to missing receiver) is found after sending a physical telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once.
If a transmission error (e.g. due to missing receiver) is found after sending a group telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once..
1. Only telegrams which are to be routed are confirmed on the sub line (ACK).
2. Each telegram on the sub line is confirmed (ACK).
1. Every telegram on the sub line is confirmed with its own ACK (from the Line coupler).
2. No confirmation with own ACK

7. Application description line repeater
Line repeaters do not use a filter table. A received telegram is routed to all lines irrespective of in which line it is processed. It is therefore not important whether the telegram is triggered within a line or whether it is sent from an upper line to a lower line via a coupler. When an error occurs during transmission of a telegram according to the physical address of a receiver the line repeater is able to repeat the telegram. With the parameters ,,Physical: Repetition if errors on main line/on sub line" this function can be set separately for both lines. In case of routing a group telegram with not receiving an acknowledgement or in case of a bus device detecting a transmission error the line repeater repeats the telegram three times. With the parameters ,,Group: Repetition if errors on main line/on sub line" this function can be adjusted separately for both lines.

ETS-Parameters line repeater
8. ETS-Parameters line repeater
8.1 Settings In the properties window the basic settings of the Line/Field coupler can be adjusted and checked. Under the Settings tab the device name and the physical address (individual address) can be changed and downloaded to the device.

Fig. 8a: Properties/Settings

Fig. 8b: Properties/Information

When not already configured as "Line repeater", the application program for "Line repeater" has to be downloaded to the device. Under the Information tab this configuration can be changed by the menu "Change Application Program". After changing the configuration the filter table entries can be added manually. Also updating the application program can be done here.

8.2 General

ETS-Text Fallback time for manual operation
Manual function

Selection [Factory default]
10 min, 1 hour, 4 hours, 8 hours [1 hour]
disabled pass all telegrams pass physical telegrams pass group telegrams [pass all telegrams]

Fig. 9: General Comment After this time period the "Manual Function" is switched off automatically. Telegram routing configuration for the "Manual Function".

ETS-Parameters line repeater
8.3 Main line

Fig. 10: Main line configuration
Important note: The parameter "transmit all" for Group telegrams or Physical telegrams is intended only for testing purposes. This setting should not be used during normal operation.

ETS-Text
Configuration
Physical telegrams
Physical: Repetition when errors on main line
Group: Repetition when errors on main line
Telegram confirmations on line
Send confirmation on own telegrams

Selection [Factory default]
groups, physical: route configure [groups, physical: route]
1. transmit all 2. block [transmit all]
1. no 2. normal 3. reduced [reduced]
1. no 2. normal 3. reduced [reduced]
1. if routed 2. always [always]
1. yes 2. no [yes]

Comment
- Route: the telegrams are routed. - Configure: the following parameters can be set manually.
1. All physical telegrams are transmitted. 2. No physical telegram is transmitted.
If a transmission error (e.g. due to missing receiver) is found after sending a Physical telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once.
If a transmission error (e.g. due to missing receiver) is found after sending a Group telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once.
1. Only telegrams which are to be routed are confirmed on the main line (ACK).
2. Each telegram on the main line is confirmed (ACK).
If a transmission error (e.g. due to missing receiver) is found after sending a group telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once..

Please note: If the parameter "Send confirmation on own telegrams" is set to yes the line repeater will send an ACK systematically on any own routed telegram. With the repeater using no filter table it is useful to send an ACK with every routed telegram.

ETS-Parameters line repeater
8.3 Sub line

Fig. 11: Sub line configuration

ETS-Text
Configuration
Physical telegrams
Physical: Repetition if errors on the sub line occur
Group: Repetition if errors on the sub line occur
Telegram confirmations on line
Send confirmation on own telegrams

Comment
- Route: the telegrams are routed. - Configure: the following parameters can be set physically.
1. All physical telegrams are transmitted. 2. No physical telegram is transmitted.
If a transmission error (e.g. due to missing receiver) is found after sending a Physical telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once.
If a transmission error (e.g. due to missing receiver) is found after sending a group telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once.
1. Only telegrams which are to be routed are confirmed on the sub line (ACK).
2. Each telegram on the sub line is confirmed (ACK).
If a transmission error (e.g. due to missing receiver) is found after sending a group telegram on the main line: 1. Physical telegrams are not repeated. 2. Physical telegrams are repeated up to three times. 3. Physical telegrams will be repeated only once..

01504.2 EN 03 2102

Viale Vicenza 14 36063 Marostica VI - Italy
www.vimar.com

References

Home automation, electrical equipment, smart home - Vimar energia positiva

Adobe PDF Library 15.0 Adobe InDesign 14.0 (Windows)