10000mAh Portable Wireless Charging Station & Magsafe Power Bank

Features

• Power bank ON/OFF Button (1)
• Type-C input (2)
• USB-A output (3)
• LED screen (4)
• Wireless charge area for phone (5)
• Wireless charge area for watch magnetically (6)
• Built-in Lightning cable (7)
• Built-in Type-C cable (8)

Product Specifications

• Capacity: 10000mAh/3.85V/38.5Wh
• Type-C port input: 5V2A/9V2A/12V1.5A 18W max
• USB-A output: 5V3A/9V2A/12V1.5A 18W max
• Type-C cable input: 5V2.8A/9V2A/12V1.5A 18W max
• Type-C cable output: 5V3A/9V2.22A/12V1.67A 20W max
• Lightning cable output: 5V2.4A
• Wireless output (phone): 5W/7.5W/10W/15W
• Wireless output (watch): 2W

What's included

• 1x 3 in 1 Fast Charge MAG-N-KICKTM 10K
• 1x Magnetic Iron Ring

Instructions

1. Charging the Power Bank:

   • Charge the powerbank fully before usage.
   • Connect the built-in Type-C cable to a power source.
   • Once fully charged, the power capacity will show 100%.

2. Charging Electronic Devices with the Power Bank

   • Connect the appropriate built-in cable to your mobile phone/device.
   • Connect the USB-A tip of a cable to USB-A Output (3).
   • Remove the charging cable from your mobile device when fully charged.

3. Charging Electronic Devices with the Wireless Charging:

   • Press Powerbank ON/OFF button (1). The LED screen will show the remaining power capacity, and the wireless charging symbol ((())) will flash once the power bank is in wireless charging standby mode.
   • Place wireless charging enable device on Wireless Charging Pad (5). The device will begin to charge, the wireless charging symbol ((())) will show on the LED screen when charging.
   • Remove your mobile device and powerbank once fully charged.
   • Note: If the wireless charging symbol ((())) flashes on the screen, an unknown object is being detected between the wireless charging pad and the phone by FOD (Foreign Object Detection). The powerbank will not begin to charge until the object is removed.

Safety Instructions

• Read all instructions before use.
• Use within temperature range: 32°F to 115°F (0°C to 45°C).
• Avoid overcharging; remove phone once fully charged.
• Optimize performance with 2-3 full charge cycles.
• To reduce the risk of injury, close supervision is required when the product is used near children.
• Do not expose the device to moisture.
• Do not use the device in excess of its output rating. Overloading outputs above the rating may result in a risk of fire or injury.
• Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
• Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F (40°C) may result in an explosion.
• To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
• Attachments on the back of your phone can impede the effectiveness of the wireless charger and lead to overheating. Please remove attachments from the phone before charging on this device.