Fluke VoltAlert™ Non-Contact Voltage Testers
1AC II / 2AC Voltage Testers / Flashlights
"Electronic Voltage Tester VoltAlert™ 1AC II"
The Fluke VoltAlert voltage tester is easy to use. Simply touch the probe to a terminal strip, outlet, or cable. If the tester lights up red and beeps, voltage is present.
- Continuously indicates battery and circuit status with a double blink.
- Highest safety specification: CAT IV 1000 V.
- Voltage testing without touching a conductor or contact.
Model: Fluke 1AC II
Operating Range: 200-1000 VAC
Batteries: 2 AAA Alkaline Batteries
Length: 148 mm
Warranty: Two-year limited warranty
2AC VoltAlert™
The 2AC detects voltage presence in circuits and faulty grounding, making it suitable for professional electricians and DIY enthusiasts. The flashlight-style voltage tester's tip lights up red when near an outlet, terminal strip, or power cord with voltage present.
- Voltage detection from 200 to 1000 VAC for a wide range of commercial, residential, and industrial applications.
- Always on without needing to be switched on. The special low-power circuit extends battery life and ensures your 2AC is always ready.
- Features a "Battery Check" button to verify battery status before use.
- Measurement Category CAT IV - the device is tested according to EN 61010 to the highest safety category CAT IV 1000 V, ensuring maximum user safety.
- Includes a clip, ideal for carrying in jacket or overall pockets.
- Powered by two AAA batteries (included).
- Robustness and reliability of Fluke products.
- Two-year limited warranty.
Model: Fluke 2AC VoltAlert™
Operating Range: 200-1000 VAC
Batteries: 2 AAA Alkaline Batteries
Length: 148 mm
Warranty: Two-year limited warranty
LVD2 Voltage Tester / Flashlight
Voltage tester with flashlight in a "pen" format.
- Two sensitivity levels.
- Detects AC voltages from 90 to 600 V.
- Blue light indicates: Voltage source nearby.
- Red light indicates: Voltage source located.
- Safety according to EN 61010 CAT IV 600 V.
Model: LVD2
"LVD1 Voltage Tester / Flashlight"
Voltage tester with two sensitivity levels.
- Detects AC voltages from 40 V to 300 V.
- Blue light indicates you are approaching the voltage source.
- Red light indicates you have found the voltage source.
- Features a versatile clip for attachment to a shirt pocket, headwear, or even the door of an electrical cabinet.
Model: LVD1
Product Information
| Model | Description |
|---|---|
| Fluke 1AC II | Voltage Tester |
| Fluke 1AC II 5PK | Voltage Tester (5-Pack) |
| Fluke 2AC | Voltage Tester |
| Fluke 2AC 5PK | Voltage Tester (5-Pack) |
| LVD2 | Flashlight |
| LVD1 | Voltage Tester/Flashlight |
Product Comparison
| Features | 2AC | 1AC-II | LVD2 |
|---|---|---|---|
| Voltage Detection | 200-1000 V AC | 200-1000 V AC | 90-600 V AC |
| Features | CAT IV 1000 V | CAT IV 1000 V | CAT IV 600 V |
| Battery Included | ✔ | ✔ | ✔ |
| Battery Check | ✔ | ✔ | |
| On/Off Button | ✔ | ||
| Audible/Silent | ✔ | ✔ | |
| Dual Sensitivity | ✔ | ||
| LED Flashlight | ✔ |
Pub_ID: 11751-ger
For more information, contact CalPlus GmbH at scopeshop@calplus.de or visit www.calplus.de.
