Pro-Ject Pro-Ject Remote Box S2 Instructions

Instructions for Pro-Ject models including: Pro-Ject, Remote Box, S2

BEDIENUNGSANLEITUNG

Lubor Grigorescu

INSTRUCTIONS FOR USE Pro-Ject Remote Box S2

4 © Pro-Ject Audio Systems · Pro-Ject Remote Box S2 · Revision 22.04.2021 Once remotes are confirmed, you can use your device for control of the selected products.

Pro-Ject Remote Box S2

File Info : application/pdf, 5 Pages, 322.26KB

RemoteBoxS2-Manual

INSTRUCTIONS FOR USE
Pro-Ject Remote Box S2

Dear music lover, Thank you for purchasing a Pro-Ject Audio Systems Remote Box S2. In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply. The power supply is used to connect/disconnect the unit from the mains. Make sure that the power supply is easily accessible at all times. Never handle the device, the power supply while your hands are wet or damp. Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never place any naked flame sources, such as lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors

External antenna
Connect supplied antenna to the connector on the back side of the unit.
Mains power connection
Connect the low voltage plug from the power supply to the Power 5VDC socket before connecting the power supply to the mains.

Main power switch
The push button on the left hand side of the front panel turns the unit on or back into standby. The blue LED above the power button indicates the status of the unit:
BT connection
Pairing with Android devices Open Settings and tap on BT. Turn on BT and tap on Scan. Searched devices will show up. Tap on Remote Box S2 and confirm presented pairing code on your Android device. Then confirm by pressing button once the blue LED above button is blinking. Confirm "Pairing" on your Android device.
Older devices may request a pairing code. Enter "0000" and confirm. No more confirmation on BT Box S2 is then needed.
BT pairing with Apple® devices Remote Box S2 is connected automatically to Apple devices. Connection can be checked in Settings>BT>My devices
On both Apple and Android application use only one remote box type device (Remote Box S2, MaiA DS/DS2 in range. Android device need to have a remote box in paired list.
BT remote control function IR emitting diodes are located on the front panel of the product. Free view has to be ensured for reliable use of remote control function.
-BT connection must be established prior using Remote Box S2 remote control function over Box control app. -BT remote control function is available in Box control app version 1.6.7 (Android) and 1.2.4 (Apple) and higher.
- Connect your device to Remote Box S2 over BT - Run Box Control app -After first start is automatically opened Setup wizard - in the first step (Select your Devices) select Remote Box S and confirm with "Next" (- in following steps select Media libraries, Media players if availbale and always confirm with "Next") - in the last step (Select your Remote Controls) select remotes which you want to have in the app. Confirm with "Next"
Pro-Ject devices uses the same remote control for more similar products. E.g. select Pre Box RS digital from the list to control Pre Box DS2 Digital
- to add more remotes open "Settings" > "Remotes" and choose desired remotes

Once remotes are confirmed, you can use your device for control of the selected products.

Learning function
lock symbol in the upper left corner next to the name of the remote allows or denies to change a command of existing Pro-Ject remote. Short tap lock or unlock the remote. When unlocked, long tap allows to learn new command, simply follow the step on display.
Pre-programmed Pro-Ject remotes can be changed too.

Technical specifications Pro-Ject Remote Box S2

Effective working range:

up to 10m (direct visibility)

BT Profile :

SPP, GATT

Frequency:

2402 ~ 2480 MHz

Sensitivity:

- 84dBm

Maximum received signal at 0.1% BER:

> = -10dBm

Maximum level of inter modulation interference: >= -30dBm

Dimensions W x H x D (D with sockets):

116 x 37 x 103 (108)mm

Weight: Outboard power supply: Power consumption:

305g 5V/1A 5V/200mA max.

Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible distributor in your country.

Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or changes to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer.

The information was correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.

BT® is a trademark owned by the BT SIG, Inc., , Microsoft®, Windows®, are either registered trademarks or trademarks of Microsoft Corporation, Apple is registered trademark of Apple Inc., AndroidTM is a trademark of
Google Inc.

Microsoft Word 2016