Instructions for Zintronic models including: Configuration E-mail Notifications for A and P Series Camera, Configuration E-mail Notifications P Series Camera, Configuration E-mail Notifications A Series Camera
CamHi cameras
3 mar 2023 — Click “App passwords” to generate new password, which you will use during camera configuration. Gmail will ask you once again to log in, before it lets you ...7 pagine
How to configure e-mail notifications for camera This manual refers to Zintronic `A' & `P' series. Table of Contents: Section I G-mail account configuration · G-mail security settings....................................................................................... · Getting G-mail generated password for authentication....................................... Section II Turning on e-mail notifications on camera · Notification via SMTP.......................................................................................... · SMPT protocol configuration............................................................................... I. G-mail account configuration · G-mail security settings 1. Open Chrome browser. 2. Log in to your Gmail account. 3. In the top right corner click the icon of your account and go to "Manage your Google Account". 4. Go to ,,Security". 5. Turn on "2-Step Verification". · Getting G-mail generated password for authentication 1. Click "App passwords" to generate new password, which you will use during camera configuration. Gmail will ask you once again to log in, before it lets you create the new password. 2. Click "Choose app" then, other option. 3. Name new application on your own, for example: Camera/CCTV/Message. And click on ,,Generate". Note: After doing this password generated by google will show up. Write it down without, spaces and click 'OK' . Password will be shown only once, there is no way to get it to show again! 4. Generated password will show up on your 2-step login, you can delete it, or generate new one in case you forgot the original one. II. Turning on e-mail notifications on camera · Notifications via SMTP 1. Open CamHiPro application and click "Settings" icon like on the screen below. 2. Choose "Alarm management and notifications": 3. Find option "Email alarm linkage", check the box "Alarm capture sent to Email" and click "Configure Email": · SMPT protocol configuration · Fill in correct parametres as followed below: 1. SMTP Server: smtp@gmail.com. 2. Port: 465. 3. Secure: SSL 4. Verification: must be ON 5. Username: Your e-mail address. 6. Password: Google-generated password. 7. Receiving address: email address which will be send to 8. Shipping address: Your e-mail address. 9. Theme: theme of the message (for example: Alarm or Move detection) 10. Information: message content 11. Click "Apply" to save your config.Microsoft Word dla Microsoft 365