Test Setup Photos

1 Radiated Test Photo

Below 30MHz:

[Image description: A circular loop antenna positioned in an anechoic chamber, with the 'Ti Group' logo visible on the antenna. The chamber walls are covered in acoustic foam panels.]

30MHz-1GHz:

[Image description: An anechoic chamber with a table in the center. The table has a device and cables on it. The chamber walls are covered in acoustic foam panels.]

Close-up:

[Image description: A close-up view of a table in an anechoic chamber, with a device and cables on it. The 'Ti Group' logo is visible on the chamber wall.]

Above 1GHz:

[Image description: An anechoic chamber with a stack of foam blocks on a table, supporting a device and cables. The chamber walls are covered in acoustic foam panels, including pyramidal absorbers at the lower section.]

2 Conducted Test Photo

Conducted Test:

[Image description: A laboratory setup with multiple electronic devices, including a laptop, spectrum analyzer (MXA), and other test equipment rack-mounted. Cables connect various components on a test bench.]

3 Conducted Emissions

Test Photo 1:

[Image description: A test setup showing headphones connected to a device, which is then connected to other electronic equipment via cables. The setup is on a wooden table in what appears to be a testing environment.]

Test Photo 2:

[Image description: A close-up view of headphones connected to a device, with cables leading to other electronic equipment. The setup is on a wooden table, with some yellow warning tape visible.]

	Ugreen HiTune Max5c Headphones Internal Photos and Components Detailed internal photos of the Ugreen HiTune Max5c Hybrid Active Noise-Cancelling Headphones, showcasing components like the PCB antenna, RF chip, and battery.
	UGREEN HiTune Max5c Headphones Test Report - RF Performance This document details the radio frequency performance testing of the UGREEN HiTune Max5c headphones, including radiated spurious emissions and band edge measurements, conducted according to FCC standards.
	UGREEN HP203 Test Report This document contains the test report for the UGREEN HP203 headphones, detailing compliance with FCC Part 15 Subpart C. It includes information on test procedures, equipment used, and results for various performance metrics.
	Ugreen HiTune Max5c Hybrid Active Noise-Cancelling Headphones External Photos External photos of the Ugreen HiTune Max5c Hybrid Active Noise-Cancelling Headphones, model HP203 (2AQI5-HP203). Includes front, rear, left, right, top, and bottom views, as well as accessory photos.
	UGREEN HiTune Max5c Noise-Cancelling Headphones Label Information Details on the label location and specifications for the UGREEN HiTune Max5c Hybrid Active Noise-Cancelling Headphones, including model numbers, FCC ID, IC, and manufacturing information.
	UGREEN HiTune Max5c Hybrid Active Noise-Cancelling Headphones HP203 Test Report This document presents the test report for the UGREEN HiTune Max5c Hybrid Active Noise-Cancelling Headphones, Model HP203. The report details the results of various tests conducted according to FCC Part 15 Subpart C and ANSI C63.10-2013 standards.
	Ugreen Group Limited FCC Attestation Statement for HP203 FCC Attestation Statement filed by Ugreen Group Limited for the HP203 device, confirming it is not prohibited equipment and not on the Covered List.
	Ugreen HiTune Max5c Headphones: USA Agent for Service of Process Designation of America Ugreen Limited as the USA agent for service of process for Ugreen Group Limited's HiTune Max5c Hybrid Active Noise-Cancelling Headphones (FCC ID: 2AQI5-HP203). Details company information, agent obligations, and contact information for both parties.

Test Setup Photos

1 Radiated Test Photo

2 Conducted Test Photo

3 Conducted Emissions

Related Documents