EcoFlow PowerPulse: Residential EV Charging Solution
Turn Solar Into Mileage
Perfect Synergy EcoFlow PowerOcean Series
The PowerOcean system channels photovoltaic yield in real-time, optimising energy usage and delivering superior load management and instantaneous power for your EV. It even stores surplus energy for use when needed. Now, that's a financial surplus in motion.
Note: When PowerPulse is integrated with PowerOcean, the PowerOcean DC Fit is not supported.
Drive Your Solar Journey
Navigate solar power intuitively with the EcoFlow app. Monitor usage, schedule charging, prioritise vehicles, manage energy stock, and more. Experience ultimate control over your solar charging performance.
The EcoFlow app provides features such as:
- Monitoring energy usage
- Scheduling charging
- Prioritising vehicles
- Managing energy stock
Dynamic Yet Independent
Charging at home lets you take advantage of comfort; this is why EcoFlow has designed the PowerPulse to charge your EV, even without integrated systems.
Lightning Fast 11kW Charging
PowerPulse outputs an impressive 11kW, injecting up to 65 miles of range into your EV in just an hour. Advanced controls and microsecond calibration maximise solar energy uptake and load management, accelerating charging to new heights.
Uncompromised Security and Safety
Safety is EcoFlow's top priority. PowerPulse thermal sensors continuously monitor operating conditions, preventing overheating and auto-shutting off once the EV battery is fully charged.
Specification
| Category | Details |
|---|---|
| Charging | Voltage: 230V (single phase), 400V (three phase) Current: 16 A Mains frequency: 50Hz/60Hz |
| PV & PowerOcean Linkage Mode | Store, charge, and use solar power intelligently according to household power usage |
| Schedule Charging | Set charging current and time via EcoFlow app |
| Safety Protection | Over-voltage, Under-voltage, Over Current, Over Temperature, Short-Circuit, Residual Current, Grounding, Lightning RCD Protection: 6mA DC, 30mA AC TYPE-A |
| Connectivity | IEEE 802.11 b/g/n 2.4 GHz Wi-Fi, Ethernet, Bluetooth, RS485 Interaction: Ecoflow App |
| Weight and Dimensions | Dimensions (WxHxD): 178mm x 283mm x 99 mm (without cable) Cable: 5m Cable IEC 62196-2 Type 2 Enclosure: IP65 rated for indoor and outdoor installation, IK10 rated Weight: 3 kg (with cable) Charger Bracket (WxHxD): 120mm x 172mm x 80mm LED Light: Colour LEDs to indicate charger status and fault condition on both the wall charger and the EV connector |
| Compliance | EN IEC61851-1:2019, EN IEC61851-21-2:2021, EN300328 V2.2.2, EN300330 V2.1.1, EN301489-1 V2.2.3, EN301489-17 V3.2.4, EN301489-3 V2.3.2, EN IEC61000-6-1:2019, EN IEC61000-6-3:2021, EN IEC62311:2020, IEC62955:2018EN60529:1991+A1:2000+A2:2013, EN62196-1:2014, EN IEC62196-2:2022, EN50620:2017+A1:2019, EN61984:2009 EN60529:1991+A1:2000+A2:2013, 2011/65/EU+2015/863, 1907/2006, 1907/2006, 1907/2006, 2019/1021, 2012/19/EU, (EU) 2022/30, EN303645 |
| Warranty | 24 months |
Note: All specifications and descriptions shown may differ from the actual specification of the product. EcoFlow reserves the right to make changes and amendments to the product shown and described here at any time without prior notice of such change. All functionality, features, specifications, design and other product information displayed in this webpage including, but not limited to, components, performance, availability, and capabilities of the product are subject to change without notice. The contents and simulated images within the screen are for demonstration purposes only.
