User Manual for COSMO models including: AB0504, 2A4C5-AB0504, 2A4C5AB0504, ab0504, Hf-61 4 In 1 Wireless Charging Phone Stand, Hf-61, 4 In 1 Wireless Charging Phone Stand, Wireless Charging Phone Stand, Charging Phone Stand, Phone Stand
Cosmo Fiber Corp. AB0504 2A4C5-AB0504 2A4C5AB0504 ab0504
File Info : application/pdf, 1 Pages, 4.13MB
DocumentDocument90 mm 90 mm 90 mm 90 mm 110 mm User's Manual Product Overview 3 7 4-in-1 Wireless Charging Phone Stand Please read the manual carefully before use and keep it for future reference. 1 456 Charging area Earphone charging area 2 Watch charging area USB Output 5 Type-C Output Specifications Item No.: Hf-61 6 Type-C Input 7 Instruction sheet Type-C Input:5V 3A, 9V 3A Wireless Output: 5V 1A, 9V 1.1A, 9V 1.67A Wireless Charger Earphone Output: 3W Wireless Watch (I Watch & Samsung) Output: 1.5W USB & Type-C Output (Max): 5V 1A Operation: Charging the phones 1. Connect the cable to the Type-C port. 2. Put your Qi compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned. 3. When the wireless charge is working correctly a blue light will turn on. Charging the wireless headphones 1. Connect the cable to a Type-C port. 2. Put your wireless headphones on top of the wireless charger, ensuring that it is face up andcentrally positioned. 3. When the wireless charge is working correctly a white light will turn on. Warnings: 1.Do not expose this product to rain or damp conditions. 2. Prevent this ítem from falling as it could cause serious damage. 3. Do not dismantle, repair or modify this product by yourself, contact an authorized specialist. 4. In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire. 5. Clean it with a dry cloth. 6. Do not place this ítem near sources of heat or expose to direct sunlight. 7. Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit. 8. To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process. 9. Do not use mobile devices with a metal case. 10. Keep out of reach of children. 11. The distance between user and products should be no less 20cm FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the device and receiver. --Connect the device into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment