Instruction Manual for MOUNTUP models including: MU0060 Studless TV Wall Mount, MU0060, Studless TV Wall Mount, TV Wall Mount, Wall Mount, Mount
MOUNTUP Studless TV Wall Mount for Most 19-55 Inch TVs, No Drill TV Mount Fit for Drywall Up to 88lbs, Max Vesa 400 x 400mm, No Stud TV Hanger Wall Mount TV Bracket, Easy Install, Ultra Slim, MU0060 : Electronics
INSTALLATION INSTRUCTION Hardware Included (V1) Wall Plate Upper Holder Down Holders 01 x1 02 x2 03 x2 Max: 100LBS (45.5KG) Horizontal × Vertical Min: 100mm×100mm (4"×4") Max: 600mm×Unrestricted (24"×Unrestricted) LM4-6 If you have any questions, please feel free to contact Customer Service via Amazon before returning. Safety Caution Please read this instruction carefully before installation.If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us. This product is designed for use in drywall with / without wood stud. - DO NOT install into solid concrete wall. The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage or body injury. WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us. Must Check Before Getting Started MAX:600mm/24" MAX: Unrestricted Max: 100LBS (45.5KG) <16mm(5/8") CAUTION: DO NOT install into concrete or brick. DO NOT mount to patched areas/ drywall seams/uneven walls. Drywall must be of sound construction with no water damage. Drywall with / without wood studs Installation Tools (Not Included) Velcro Cable Ties ×3 Bubble Level ×1 HardwarecWall Nail 5/64 x 1 3/16 in x33 A TV Screws / Washers Philips Screws M4 x 30mm Philips Philips Screws Screws M6 x 30mm M8 x 30mm Philips Screws M4 x 40mm Philips Screws M6 x 40mm Philips Screws M8 x 40mm Washers Ø6mm M4-5-6 Spacers L5mm x4 M-A x4 M-B x4 M-C x4 M-D x4 x4 M-E M-F x4 x8 M-G Step 1-1 Select TV screw diameter Thread screws by hand into the threaded holes on the back of your TV to select which screw diameter fits your TV. M4 M6 M8 Step 1-2 Select TV screw length Hammer 2M Band Tape 1 Screwdriver Correct Correct 2 Correct Correct Step 2 Measure your TV pattern Measure and note the width of the square or rectangle formed from the VESA holes pattern . 100mm 4in. 200mm 8in. 300mm 11 3/4in. 400mm 16in. 500mm 19.7in. 600mm 23.6in. Step 3 Attach the holders (a) For Flat Back Top of TV Step 4 Wall plate installation (for drywall with /without stud) Position the wall plate 01 at your desired height and secure it with the all nails A total 33pcs. W ! Alternate installing all the nail holes from side to side. x33 A 2M Washers M-G Not for M8 screws M-A M-C M-B Use the shorter screws UP ! Wall plate MUST be level when securing the nails. Step 5 Lift and hang TV with bracket onto wall bracket Adding cables before hanging the TV onto wall plate. Hang the TV by securing the Upper Holders 002 onto the wall plate. 02 03 (b) For Round Back / Extra Space Top of TV Pay attention to the direction M-G Spacers Washers M-G Not for M8 screws M-D M-E M-F Use the longer screws 02 Product dimensions: 600mm/24" 500mm/20" 400mm/16" 300mm/12" 200/8" 100/4" 03 Pay attention to the direction 3 4 unrestricted LIFT 27mm /1.06"Adobe PDF library 16.03