Grundig WK 7280 Kettle

General Overview

Thank you for purchasing the Grundig WK 7280 Kettle. Please read the following user notes carefully to ensure you can enjoy your product for years to come.

Responsible Approach: Grundig aims to ensure fair remuneration for all employees and suppliers, adhering to socially accepted working conditions. We focus on the efficient use of raw materials and aim to reduce plastic waste annually. All accessories are designed for a minimum lifespan of 5 years. For a future worth living. For a good cause. Grundig.

Controls and Parts

Refer to the diagram on page 3.

• A: Filling Spout
• B: Water Filter (internal)
• C: Lid
• D: Lid Release Button
• E: Handle
• F: Water Level Indicator
• G: Water Reservoir
• H: Power Base
• I: Keep Warm Function Button
• J: On/Off Button
• K: Temperature Adjustment Button
• L: Temperature Indicator Light

Preparation

1. Before first use, clean the kettle thoroughly and boil water twice, discarding the water each time.

Operation

1. Open the lid by pressing the lid release button (C).
2. Fill the water reservoir (G) with water. Note: Do not place the kettle on the power base (H) while filling. Do not fill beyond the maximum indicator or below the minimum indicator.
3. Close the lid securely.
4. Place the kettle on the power base (H). Ensure the appliance is upright and stable.
5. Plug the power cord into the socket.
6. Select the desired temperature by pressing the temperature adjustment button (K). Pressing the button cycles through temperatures: 100°C, 80°C, 60°C, 40°C, and back to 100°C. The temperature indicator light (L) will flash.
7. The keep warm function can be activated by pressing the button (I). The indicator light will illuminate.
8. Press the On/Off button (J) to start boiling. The indicator light will illuminate, and the boiling process will begin. While the appliance is operating, the indicator light for the selected temperature will flash. This light will display the current water temperature until the set temperature is reached.

Note: The lid must remain closed during the boiling process; otherwise, the kettle will not automatically shut off. The desired temperature can be changed or adjusted by pressing the button during the boiling process.

When the desired temperature is reached, the On/Off button (J) indicator light will turn off, and the kettle will stop operating. After 60 seconds, the temperature indicator lights will turn off, and the kettle will enter standby mode.

Notes: To manually stop the boiling process, press the On/Off button (J). If the keep warm function is active and the temperature drops below the set point, the boiling process will restart. The keep warm function will automatically deactivate after 30 minutes.

10. Unplug the appliance.
11. Remove the kettle from the power base (H). Hold the kettle only by the handle (E).

Caution: Do not open the lid as hot water may splash out. Ensure no water splashes onto the power base (H).

12. Pour the boiled water into your cup or mug via the filling spout (A).

Note: Allow the kettle to cool down between heating cycles.

Tips and Recommendations

The kettle is equipped with a water filter (B) that filters limescale and other particles when pouring water. For best results, use soft or filtered water to prevent limescale buildup.

Cleaning and Maintenance

Caution: Never use gasoline, solvents, abrasive cleaners, metal objects, or stiff brushes to clean the appliance. Never immerse the kettle, power base (H), or power cord in water or any other liquid.

1. Turn off the appliance and unplug it from the socket.
2. Allow the appliance to cool down completely.
3. Clean the exterior surfaces with a damp cloth and a small amount of mild detergent.
4. The water filter (B) can be removed for cleaning. To remove the filter: Press the latch downwards and remove the filter.
5. Depending on the level of limescale buildup, clean with water and white vinegar or lemon juice, or use a soft brush. Reinsert the filter by sliding it back into place.
6. After cleaning, dry all parts thoroughly with a soft towel before using the appliance again.

Descaling the Kettle

Descaling the kettle will extend its lifespan. The frequency of descaling depends on the hardness of the water in your area.

1. Fill the kettle with water up to three-quarters of the maximum level.
2. Add white vinegar or lemon juice until it reaches the maximum level.
3. Boil this solution (refer to the operation section).
4. After the kettle switches off, unplug it.
5. Leave the solution in the kettle for a few hours.
6. Pour out the solution and rinse the inside of the kettle thoroughly.
7. Fill the kettle with clean water and boil it.
8. Empty and rinse the kettle again with water.

Notes: If limescale remains, repeat the process. You can also use a commercial limescale remover suitable for kettles. If using a limescale remover, follow the manufacturer's instructions.

Warning: If the limescale is not removed from the water reservoir after prolonged use, the base may become completely covered in limescale, rendering the appliance inoperable. In such cases, it must be repaired by a service center. Damage caused by improper use is not covered by warranty.

Storage

If you do not plan to use the appliance for an extended period, please store it carefully. Ensure the appliance is unplugged and completely dry. Store the appliance in a cool, dry place. Ensure the appliance is stored out of reach of children.

Environmental Information

This product is made from high-quality, recyclable, and reusable parts and materials. Therefore, do not dispose of the product with normal household waste at the end of its service life. Take it to a collection point for recycling electrical and electronic equipment. This is indicated by the symbol on the product, in the user manual, and on the packaging. Please contact your local authorities to find the nearest collection point. By recycling used products, you help protect the environment.

Technical Data

This product complies with European directives 2004/108/EC, 2006/95/EC, 2009/125/EC, and 2011/65/EU.

Power Supply: 220-240 V ~, 50/60 Hz

Power: 2000-2400 W

Grundig reserves the right to make technical and design changes.