VIVO Black 60" x 24" Table Top
Instruction Manual
SKU: DESK-TOP60B
For helpful videos and specifications, visit: https://vivo-us.com/products/desk-top60b
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. VIVO cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
- A (x1) Desktop
TOOLS NEEDED
- Drill
- Phillips Screwdriver
ASSEMBLY STEPS
STEP 1
Mount the desktop to the desk frame using screws. If necessary, drill pilot holes for the screws to match your desk frame. If using a VIVO desk frame, make sure to orientate the desktop so the control panel or crank handle pilot holes are facing the front.
Please note that mounting screws are not included with this desktop. Use the mounting hardware included with your standing desk frame to mount the desktop.
This desktop is pre-drilled to match the mounting holes in most VIVO electric desk frames with two legs. Some frames will not fit these holes. In this case, you will need to drill your own to match your frame.
Diagram Description: A line drawing shows the underside of the desktop being attached to a desk frame with screws.
STEP 2
For VIVO frames, pre-drilled holes have been included for most control panels and crank handles. Note that holes for some control panels and cranks are not pre-drilled. In this case, you must drill your own.
Diagram Description: A view of the bottom side of the desktop indicates areas with pre-drilled holes for control panels and crank handles.
STEP 3
Use a bubble level to make sure the desktop is level. If necessary, adjust the foot pads on the standing desk frame to level the desktop.
Diagram Description: An illustration shows a standing desk with a bubble level on its surface to check for levelness. A close-up view of the bubble level indicates a level surface.
STEP 4
If installed to an electric height adjustable desk frame, the desk may now be plugged into a power outlet.
Diagram Description: An illustration depicts a height-adjustable desk being plugged into a wall power outlet.
GET IN TOUCH
Support is available Monday - Friday from 7:00am - 7:00pm CST.
? 309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M 4S
? help@vivo-us.com | AVG. RESPONSE TIME (within office hrs): 1HR 8M (23% within < 15m, 38% within < 30m, 61% within < 1hr, 83% within < 2hr, 92% within < 3hr)
? Chat live with an agent at www.vivo-us.com | AVG. RESOLUTION TIME (within office hrs): < 15 M
For more VIVO products, check out our website: www.vivo-us.com








