D-Link

DGS-3130-30TS Managed Stackable L3 Switch with 24 x 10/100/1000Base-T, 2 x 10GBase-T, and 4 x 10GBase-X SFP+ Ports

Overview & Key Features

The D-Link DGS-3130-30TS is a managed stackable Layer 3 switch designed for secure connections in enterprise and Metro Ethernet networks. It offers a robust combination of high performance, advanced security, and comprehensive Layer 3 routing capabilities.

Main Characteristics

Multifunctional Software: Equipped with a wide range of features to meet the demands of creating reliable enterprise networks.
High Performance: Six 10-Gigabit ports (2 x 10GBase-T and 4 x SFP+) provide ample connectivity and high-throughput capabilities for demanding network environments.
Static Electricity Protection: Features 6 kV static electricity protection on copper Gigabit ports to safeguard against induced voltage and prevent damage to the switch and connected devices.

Image Description: A front view of the D-Link DGS-3130-30TS network switch, showcasing its various ports, including 10/100/1000Base-T, 10GBase-T, and SFP+ slots, along with status LEDs.

Product Description

The DGS-3130-30TS managed stackable Layer 3 switch is engineered for secure end-user connectivity within enterprise or Metro Ethernet networks. It boasts 24 x 10/100/1000Base-T ports, 2 x 10GBase-T ports, and 4 x 10GBase-X SFP+ ports, supporting multicast groups and advanced security features, making it an ideal Layer 2 access solution. The switch also includes a USB 2.0 port for convenient firmware and configuration file management, as well as system log storage.

Reliability

Designed for enterprise and Metro Ethernet networks requiring high network security and maximum uptime. The DGS-3130-30TS features a connector for an external redundant power supply (DPS-500A2) to ensure continuous operation. It supports Spanning Tree protocols (802.1D, 802.1w, 802.1s), Loopback Detection, and Storm Control to enhance network resilience. The Ethernet Ring Protection Switching (ERPS) technology provides minimal ring recovery time (50ms) in case of failure. Dynamic 802.3ad Link Aggregation Port Trunking is supported for load balancing and increased fault tolerance when using multiple switches.

Advanced Security Features

The DGS-3130-30TS supports robust security functionalities such as multi-level Access Control Lists (ACL), storm control, and IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows control over computer access to the network based on their IP and MAC addresses, as well as the connection port, thereby extending access management capabilities. DHCP Snooping automatically learns IP/MAC address pairs and filters DHCP packets, adding them to the IMPB "whitelist".

Access Control Policies

This switch supports authentication mechanisms like 802.1X, Web Access Control (WAC), and MAC-based access control for simplified network deployment. Individual policies, such as VLAN membership, QoS policies, and ACL rules, can be assigned to each node. Furthermore, the switch supports Microsoft® NAP (Network Access Protection), enabling users to prevent non-compliant computers from accessing the network.

Traffic Management

The DGS-3130-30TS offers a suite of multi-level QoS/CoS features, ensuring critical-latency network services like VoIP, video conferencing, and surveillance are handled with appropriate priority. Traffic Shaping functions guarantee bandwidth for these services during periods of high network load. With support for Layer 2 multicast, the DGS-3130-30TS facilitates IPTV application processing. IGMP/MLD Snooping on a per-port basis optimizes multicast traffic delivery, while ISM VLANs direct multicast streams to a dedicated Multicast VLAN, preserving bandwidth and enhancing network security. ISM VLAN profiles allow quick assignment or replacement of pre-set configurations on subscriber ports.

Technical Specifications

Hardware

Component	Specification
Processor	BCM56160 (1.25 GHz)
RAM	1 GB
Flash Memory	256 MB
Interfaces	24 x 10/100/1000Base-T ports 2 x 10GBase-T ports 4 x 10GBase-X SFP+ ports Console Port (RJ-45) Management Port (10/100/1000Base-T RJ-45, Out-of-band) USB 2.0 Type A Port
Indicators	Power Link/Activity/Speed (per port) Console USB RPS Fan Error Stack ID
Power Input	AC power input socket
Redundant Power Supply Connector	Socket for connecting DPS-500A2 redundant power supply

Functionality & Standards

Category	Specifications
Standards and Functions	IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3an 10GBase-T IEEE 802.3z 1000Base-X IEEE 802.3ae 10GBase-X Flow Control (IEEE 802.3x) Energy-Efficient Ethernet (IEEE 802.3az)

Performance

Metric	Value
Switching Capacity	168 Gbps
Switching Method	Store-and-forward
Max Forwarding Rate (64-byte packets)	125 Mpps
MAC Address Table Size	16K entries
Packet Buffer	2 MB
Jumbo Frame	9,216 bytes

Software Features

Feature Category	Details
Stacking	Virtual Stacking (D-Link Single IP Management, up to 32 devices) Physical Stacking (up to 80 Gbps, up to 9 devices)
Layer 2 Functions	MAC Address Table: up to 16K entries Flow Control (802.3x) Head-of-Line (HOL) Blocking Prevention Link Aggregation (802.3ad, up to 32 groups per device/8 ports per group) Spanning Tree Protocol (802.1D STP, 802.1w RSTP, 802.1s MSTP) BPDU Filtering Root Guard (Restriction)
Layer 2 Multicast	IGMP Snooping (v1/v2/v3, up to 1024 groups) IGMP Snooping Fast Leave (per port/node) Static Multicast Groups: 128 IP Multicast Filtering: up to 24 profiles, 128 address ranges per profile MLD Snooping (v1/v2, up to 1024 groups) MLD Snooping Fast Leave (per node) Static Multicast Groups: 64
VLAN	Max 4K VLAN groups GVRP: Max 4K dynamic VLAN groups Port-based VLAN Protocol-based VLAN Voice VLAN MAC-based VLAN VLAN Translation ISM VLAN Asymmetric VLAN Private VLAN VLAN Trunking Double VLAN (Q-in-Q) Port-based Q-in-Q Selective Q-in-Q
Quality of Service (QoS)	802.1p 8 queues per port Queue Handling: Strict Priority, Weighted Round Robin (WRR), Strict + WRR Flow Actions: 802.1p Priority Tagging, ToS/DSCP Tagging Bandwidth Control (per port/flow, min 8 Kbps granularity) Classification based on: Port, VLAN ID, 802.1p Priority, MAC Address, IPv4 Address, DSCP, Protocol Type, TCP/UDP Port
Access Control Lists (ACL)	Classification based on: 802.1p Priority, VLAN ID, MAC Address, Ether Type, IPv4 Address, DSCP, Protocol Type, TCP/UDP Port IPv6 Address Classification IPv6 Traffic Class IPv6 Flow Label Bandwidth Control (per port/flow, min 8 Kbps granularity) Rate Limiting (CIR/PIR, trTCM, CBS/PBS, srTCM, CBS/EBS) Weighted Random Early Detection (WRED) Max ACL Entries: Ingress 2048, Egress 512 ACL by Schedule CPU Interface Filtering
Security	SSH v2 SSL v1/v2/v3 Port Security: up to 64 MAC addresses per port IP-MAC Port Binding DHCP Snooping (up to 500 bindings) Storm Control (Broadcast/Multicast/Unicast) Traffic Segmentation D-Link Safeguard Engine
AAA	802.1X Authentication (port/node-based, Identity-driven policy assignment) Web Access Control (WAC) (port/node-based, Identity-driven) MAC-based Access Control (port/node-based, Identity-driven) Authentication Database Failover Guest VLAN Microsoft® NAP Support (802.1X NAP, DHCP NAP) RADIUS Accounting RADIUS and TACACS+ Authentication 4-level Access Rights
Green Technology	Power saving via link status detection Power saving via cable length detection
OAM	Cable Diagnostics 802.3ah Ethernet Link OAM D-Link Unidirectional Link Detection (DULD) Dying Gasp 802.1ag Connectivity Fault Management (CFM) Y.1731 OAM DDM for transceiver diagnostics
Management	Web Interface Command Line Interface (CLI) Telnet Server/Client TFTP Client DNS Client Secure FTP Server ZModem SNMP v1/v2c/v3, SNMP Traps System Log sFlow RMON v1 (groups 1, 2, 3, 9), RMON v2 (ProbeConfig) LLDP BootP/DHCP Client DHCP Auto-configuration
Layer 3 Functions	Max 128 IP Interfaces ARP Proxy IPv6 Neighbor Discovery (ND)
Layer 3 Routing	Static Routing (Max IPv4: 512 entries, Max IPv6: 256 entries) RIP (v1/v2/ng), OSPF (v2/v3), VRRPv3 Supports 1K hardware routing entries (IPv4/IPv6) Supports 4K L3 switching entries (IPv4/IPv6) Policy-based Routing
Other Security Features	NetBIOS/NetBEUI Filtering IPv6 ND Snooping DHCP Server Screening ARP Spoofing Prevention (Max 64 entries) DoS Attack Prevention BPDU Guard ARP/IP Packet Inspection

Physical Specifications

Parameter	Value
Dimensions (L x W x H)	440 x 250 x 44 mm
Weight	2.98 kg

Operating Environment

Parameter	Specification
Power Input	100 to 240 VAC, 50/60 Hz
Max Power Consumption	30.76 W
Power Consumption (Standby)	23.2 W
Heat Dissipation	104.65 BTU/hr
MTBF (hours)	900,546
Noise Level	52.5 dB (High fan speed), 33.5 dB (Low fan speed)
Static Electricity Protection	Meets IEC61000-4-5 standard for copper Gigabit ports.
Ventilation	1 fan
Temperature	Operating: 0 to 50 °C, Storage: -40 to 70 °C
Humidity	Operating: 10% to 90% non-condensing, Storage: 5% to 90% non-condensing

Package Contents

DGS-3130-30TS Switch
Power Cord
Power Cord Retainer
Console Cable (RJ-45 and RS-232 connectors)
2 x Rackmount Brackets for 19-inch rack installation
Mounting Kit
4 x Rubber Feet
Quick Installation Guide

Certifications

RoHS
EMI: FCC Class A, CE Class A, VCCI Class A, IC
Safety: CB, CUL
Other: RCM, BSMI, CCC

Ordering Information

Model

Model	Description
DGS-3130-30TS	Managed Stackable L3 Switch with 24 x 10/100/1000Base-T, 2 x 10GBase-T, and 4 x 10GBase-X SFP+ Ports

Optional SFP+ Transceivers

Model	Description
DEM-431XT	SFP+ transceiver with 1 port 10GBase-SR for multi-mode optical cable (up to 300 m)
DEM-432XT	SFP+ transceiver with 1 port 10GBase-LR for single-mode optical cable (up to 10 km)
DEM-433XT	SFP+ transceiver with 1 port 10GBase-ER for single-mode optical cable (up to 40 km)
DEM-434XT	SFP+ transceiver with 1 port 10GBase-ZR for single-mode optical cable (up to 80 km)
DEM-436XT-BXD	WDM SFP+ transceiver with 1 port 10GBase-ER (Tx: 1330 nm, Rx: 1270 nm) for single-mode optical cable (up to 40 km)
DEM-436XT-BXU	WDM SFP+ transceiver with 1 port 10GBase-ER (Tx: 1270 nm, Rx: 1330 nm) for single-mode optical cable (up to 40 km)
431XT	SFP+ transceiver with 1 port 10GBase-SR for multi-mode optical cable (up to 300 m)
433XT	SFP+ transceiver with 1 port 10GBase-ER for single-mode optical cable (up to 40 km)
436XT-BXD/20KM	WDM SFP+ transceiver with 1 port 10GBase-ER (Tx:1330 nm, Rx:1270 nm) for single-mode optical cable (up to 20 km)
436XT-BXU/20KM	WDM SFP+ transceiver with 1 port 10GBase-ER (Tx:1270 nm, Rx:1330 nm) for single-mode optical cable (up to 20 km)
436XT-BXD/40KM	WDM SFP+ transceiver with 1 port 10GBase-ER (Tx:1330 nm, Rx:1270 nm) for single-mode optical cable (up to 40 km)
436XT-BXU/40KM	WDM SFP+ transceiver with 1 port 10GBase-ER (Tx:1270 nm, Rx:1330 nm) for single-mode optical cable (up to 40 km)

Optional SFP Transceivers

Model	Description
DGS-712	SFP transceiver with 1 port 1000Base-T (up to 100 m)
DEM-310GT	SFP transceiver with 1 port 1000Base-LX for single-mode optical cable (up to 10 km)
DEM-311GT	SFP transceiver with 1 port 1000Base-SX for multi-mode optical cable (up to 550 m)
DEM-312GT2	SFP transceiver with 1 port 1000Base-SX+ for multi-mode optical cable (up to 2 km)
DEM-314GT	SFP transceiver with 1 port 1000Base-LHХ for single-mode optical cable (up to 50 km)
DEM-315GT	SFP transceiver with 1 port 1000Base-ZX for single-mode optical cable (up to 80 km)

Optional 10G SFP+ Cables

Model	Description
DEM-CB100S	Passive 10GBase-X SFP+ cable, 1 m, for direct connection
DEM-CB300S	Passive 10GBase-X SFP+ cable, 3 m, for direct connection
DEM-CB700S	Passive 10GBase-X SFP+ cable, 7 m, for direct connection

Redundant Power Supplies

Model	Description
DPS-500A	AC Redundant Power Supply for switches (140 W)
DPS-500DC/B	DC Redundant Power Supply for switches (140 W)

Notes:

1. For physical stacking of DGS-3130-30TS/30S/30PS models, the weight is 1 unit per device. Maximum stackable devices: 9. For DGS-3130-54TS/54S/54PS models, the weight is 2 units per device. Maximum stackable devices: 6. Physical stacking of DGS-3130-30XX and DGS-3130-54XX models is possible, considering both weight (max 12) and maximum stackable devices (9 units). Example: 6 x DGS-3130-30XX (weight 6) + 3 x DGS-3130-54XX (weight 6) = Total: Max stackable devices (9 units) not exceeded, max weight (12) not exceeded.
2. Not included in the package.
3. Will be available in future software versions.

D-Link Building Networks for People. Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation/D-Link System Inc. All other trademarks are the property of their respective owners.

	D-Link DGS-3130-30S: Управляемый L3 Коммутатор - Технические Характеристики Подробное описание управляемого L3 стекируемого коммутатора D-Link DGS-3130-30S с 24 портами 1000Base-X SFP, 2 портами 10GBase-T и 4 портами 10GBase-X SFP+. Включает характеристики, функции безопасности, QoS и информацию для заказа.
	D-Link DGS-1510-20 Getting Started Guide This guide provides step-by-step instructions for setting up the D-Link DGS-1510-20 SmartPro Stackable Switch, including unpacking, installation, and basic configuration.
	D-Link DGS-3420-28TC Quick Installation Guide This guide provides instructions for setting up the D-Link DGS-3420-28TC xStack L3 Managed Stackable Gigabit Switch, covering hardware overview, installation, connections, and management options.
	D-Link DGS-3130-54TS Managed L3 Stackable Switch The D-Link DGS-3130-54TS is a high-performance, managed Layer 3 stackable switch designed for enterprise and Metro Ethernet networks. It features 48 x 10/100/1000Base-T ports, 2 x 10GBase-T ports, and 4 x 10GBase-X SFP+ ports, offering robust security, advanced QoS, and reliable connectivity.
	D-Link DMS-1250-12TP Quick Installation Guide This guide provides instructions for installing and managing the D-Link DMS-1250-12TP L2 Smart Managed PoE Switch. It covers package contents, device interfaces, LED indicators, installation procedures (rack and desktop), transceiver installation, power management, console and web UI access, and technical specifications.
	D-Link DGS-1510-28XMP Getting Started Guide A comprehensive guide for the D-Link DGS-1510-28XMP Layer 2+ SmartPro Stackable Switch, detailing installation, grounding, management, and network connectivity features.
	D-Link DMS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Comprehensive hardware installation guide for D-Link DMS-3130 Series Layer 3 Stackable Managed Switches, detailing setup, components, connections, and safety for enterprise networks.
	D-Link DGS-1210-52MP/FL Managed L2 Gigabit PoE Switch Overview A comprehensive overview of the D-Link DGS-1210-52MP/FL, a 48-port managed Layer 2 Gigabit Ethernet switch featuring PoE, advanced security, robust Layer 2/3 functionalities, and energy-efficient operation, including technical specifications and SFP compatibility.