Shelly S3SW-001X8EU Bluetooth Relay iOS App Botland Instruction Manual

Instruction Manual for Shelly models including: S3SW-001X8EU Bluetooth Relay iOS App Botland, S3SW-001X8EU, Bluetooth Relay iOS App Botland, Relay iOS App Botland, iOS App Botland, Botland
Shelly 1 Mini Gen3

1 set 2024 — ... Alexa, and. Samsung SmartThings ... User-Friendly Interface: The device provides a user-friendly interface with a reset button for manual interactions.
File Info : application/pdf, 6 Pages, 139.10KB
Shelly 1 Mini Gen3
Skip to main content Show navigation
Knowledge Base / Devices / Shelly Gen3 devices / Shelly Mini Gen3 devices Skip table of contents
Shelly 1 Mini Gen3
Device identification
Device name: Shelly 1 Mini Gen3 Device model: S3SW-001X8EU Device SSID: Shelly1MiniG3-XXXXXX BLE model ID: 0x1015
Short description
Shelly1 Mini Gen3 is a small formfactor smart switch with potential-free contacts, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services. The device is an improved version of Shelly Plus 1 Mini with a more advanced processor and increased memory. Shelly1 Mini Gen3 can be accessed, controlled and monitored remotely fromany place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet. It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space. Shelly1 Mini Gen3 Mini has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Main features
Wi-Fi Connectivity: The device can connect to your home Wi-Fi network, allowing you to remotely monitor humidity and temperature data through a smartphone app or other compatible devices. Integration with Smart Home Platforms: You can integrate the Shelly 1 Mini Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation capabilities through these platforms. Bluetooth Connectivity: Bluetooth and BLE gateway are available for inclusion purposes, which may be useful during the setup process. User-Friendly Interface: The device provides a user-friendly interface with a reset button for manual interactions. ImprovedProcessor andMemory: Upgraded with an improved processor and increased memory for enhanced performance. Wireless Connectivity: The device supports Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 protocols with specified indoor and outdoor range capabilities. Dry Contact: Allows switching on and off of lower voltage devices. BLEGateway: Bridge between your Shelly BLU devices and the wider Shelly ecosystem. It receives Bluetooth signals and sends themto the cloud or locally to another non-bluetooth device. WiFi Range extender for IoT devices: A WiFi extender is employed to expand the reach of your WiFi network by receiving your current WiFi signal, enhancing its strength, and then transmitting the enhanced signal over a wider area. Scripting: https://shelly-api-docs.shelly.cloud/gen2/Scripts/ShellyScriptLanguageFeatures/
1 / 6

Wide range of integrations: The device can be integrated with 3rd party home systems, documented HTTP API, MQTT(s), Web Hooks over HTTP and HTTPS, UDP Schedules: Allows scheduling of complexoperations to be executed in predefined time window. Users can specify time windows based on date, time of day, weekdays, hours, minutes and seconds.
Use cases
Remote Appliance Control: Turn on or off electric appliances remotely using your mobile phone, tablet, PC, or home automation system. Internet-ConnectedConvenience: Access nd control devices fromanywhere with internet connectivity, as long as the Shelly 1 Mini Gen3 is connected to a Wi-Fi router. Space-Efficient Retrofitting: Retrofit the smart switch into standard electrical wall boxes, behind power sockets, light switches, or other locations with limited space. Home Automation: Shelly 1 Mini Gen3 enables automatic control of power appliances for more relaxing and enjoyable experience.
Integrations
Amazon Alexa supported capabilities
Yes
Google Smart Home supported traits
Yes
Samsung SmartThings supported capabilities
Yes
Simplified internal schematics

Device electrical interfaces

Inputs
1 switch/button input on screw terminal 1 potential-free contacts relay input on screw terminal 2 power supply inputs on screw terminals: N and L

Outputs
1 potential-free contacts relay output on screw terminal

Connectivity
Wi-Fi Bluetooth

Safety functions

2 / 6

Safety functions
Overheating protection
Supported load types
Resistive (incandescent bulbs, heating devices) Capacitive (capacitor banks, electronic equipment, motor start capacitors) Inductive (LED light drivers, transformers, fans, refrigerators, air-conditioners))
User interface
Inputs
One (Control) button
Press and hold for 5 seconds to enable Device access point and Bluetooth connection. Press and hold for 10 seconds to factory reset the Device.
Outputs
LED (monocolor) indication
AP (Access Point) enabled and Wi-Fi disabled: 1 second ON / 1 second OFF Wi-Fi enabled, but not connected to a Wi-Fi network: 1 second ON / 3 seconds OFF Connected to a Wi-Fi network: Constantly ON Cloud is enabled, but not connected: 1 second ON /5 seconds OFF Connected to Shelly Cloud: Constantly ON OTA (Over the Air Update): ½ sec ON / ½ second OFF Button pressed and held for 5 seconds: ½ second ON / ½ second OFF Button presses and held for 10 seconds: ¼ second ON / ¼ second OFF
The list above starts with the initial device status and the lowest priority. Every next state cancels the previous one.
Specifications

Quantity Physical Size (HxWxD): Weight: Screw terminals maxtorque: Conductor cross section: Conductor stripped length: Mounting: Shell material: Shell color: Terminal Color: Environmental

Value
29x34x16 ±0.5 mm / 1.34x1.11x0.63 ±0.02 in 19 ±1 g / 0.65 ±0.04 oz 0.4 Nm / 3.5 lbin 0.2 to 2.5 mm² / 24 to 14 AWG(solid, stranded, and bootlace ferrules) 6 to 7 mm / 0.24 to 0.28 in Wall box Plastic Blue, C-95%; M-53%; Y-0%; K-0% Black
3 / 6

Ambient working temperature: Humidity: Max. altitude: Electrical Power supply: Relay: Power consumption:
External protection:
Output circuits ratings
Max. switching voltage:
Max. switching current:
Max. output power:
Voltage protection / Cutoff: Current protection / Cutoff: Maxpower protection / Cutoff: Sensors, meters Internal-temperature sensor: Radio Wi-Fi Protocol: RF band: Max. RF power: Range: Bluetooth Protocol: RF band: Max. RF power: Range: Microcontroller unit CPU: Flash: Firmware capabilities Schedules: Webhooks (URL actions): Scripting:

-20 °C to 40 °C / -5 °F to 105 °F 30 % to 70 % RH 2000 m / 6562 ft
110 - 240 VAC Dry, NO contact, 1-pole, µ contact < 1.2 W Tripping characteristic B or C, max. 10A max. rated current, min. 6 kA interrupting rating, energy limiting class 3
240 VAC 30 VDC
8 A/240 VAC 5 A/30 VDC
2000 W/240 VAC 150 W/30 VDC No No No
Yes
802.11 b/g/n 2401 - 2495 Hz < 20 dBm Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions)
4.2 2400 - 2483.5 MHz < 4 dBm Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions)
ESP-Shelly-C38F 8 MB
20 20 with 5 URLs per hook Yes
4 / 6

MQTT:

Yes

UDP:

Yes

Advanced schedules:

Yes

KVS (Key-Value Store):

Yes

Basic wiring diagrams

Legend
SW O I L N

Terminals

Switch (controlling O) input terminal

L

Load circuit output terminal

N

Load circuit input terminal

Live (110-240 V) terminal

Neutral terminal

Components and APIs
This device All Shelly devices and services
Compliance
Shelly 1 Mini Gen3 multilingual EU declaration of conformity.pdf Shelly Mini 1 Gen3 UK PSTI ACT Statement of compliance.pdf Shelly Mini 1 Gen3 x2 UK PSTI ACT Statement of compliance.pdf
Printed user guide
Shelly 1 Mini Gen3 multilingual printed user and safety guide.pdf
5 / 6

Wires Live (110 - 240 VAC) wire Neutral wire

Installation guides
Privacy policy / Cookie policy / Support / FB community support / Contact us Copyright © 2024 Shelly Cloud. Allterco Robotics OOD · Powered by Scroll Viewport & Atlassian Confluence
6 / 6
References

wkhtmltopdf 0.12.5 Qt 4.8.7