Quickie Q700 M with SEDEO® PRO™ Power Wheelchair
Order Form and Specifications
Model Identifier: EIPW25
Customer & Ship To Information
| Customer | Ship To |
|---|---|
| Account # | Name |
| Date | Address |
| PO# | City |
| Buyer | Province |
| Mark For | Phone |
| Postal Code |
Client Measurements
The following measurements are taken from the client to ensure proper fit and configuration:
| Measurement | Value (in) |
|---|---|
| a) Top of head to seat | |
| b) Top of shoulder to seat | |
| c) Underarm to seat | |
| d) Elbow to seat | |
| e) Top of leg to seat | |
| f) Shoulder width | |
| g) Chest width | |
| i) Hip width | |
| j) Actual sitting depth | |
| m) Foot length | |
| n) Knee to foot | |
| o) Seat width |
A diagram illustrates a side profile of a person seated in a wheelchair, with lines and labels (a through o) indicating various body measurements relative to the seat, such as 'Top of head to seat', 'Shoulder width', 'Hip width', and 'Knee to foot'.
Notes:
Chair Specifications
| Specification | Details |
|---|---|
| Typical Weight w/out Batteries | 330 lbs. |
| Typical Weight with Batteries | 410 lbs. |
| Power Seating | 50° of CG Tilt and Power Recline with 4" mechanical sheer reduction / 12" seat elevator |
| Seat Type | SEDEO® PRO™ / JAY® Syncra™ |
| Seat Size Range | Width 16" to 22", Depth 14" to 22" |
| Seat-to-Floor Height Range | 16.5" to 19" |
Mid-Wheel Drive Base Specifications
| Specification | Details |
|---|---|
| Drive Wheel Position | Mid-wheel drive |
| User Weight Capacity | 300 lbs. |
| Base Size | Width 24.5", Length 36.5" |
| Minimum Turning Radius | 19.8" (excludes footplates) |
| Drive Control | R-net PM 120A / R-net PM 90A |
| Driving Range | Up to 18 miles (w/ Group 24 Batteries) |
| Drive Motors | 4-pole 6 mph, 8 mph |
| Drive Wheels | 14" w/flat-free inserts (black) |
| Casters | 6" front / 6" rear (black) |
| Charger | 10A Dual Mode (Compact) |
| Battery Size | Group 24 / Group 34 |
| Colour | 9 shroud colours and 7 colour accents |
| Maximum Ground Clearance | 3" |
Base Options
Standard Duty Mid Wheel Drive Base (End Item Number EIPW25 - PRO™ Seat)
| Option | Description | Retail |
|---|---|---|
| 250PC197 | Quickie Q700 M NPC No Power Option for SEDEO® PRO™ Seat. Included in Base Pricing: Q700 M Base, R-net 90amp Electronics for No Power Seat Functions, ProGrip™ Six-Wheel Independent Suspension, 14" Drive Wheels with Dual Density Inserts, 6" Flat Free Casters, ISO Occupied Tie-Down Brackets and 10amp Charger. Max Speed = 6mph, Weight Capacity = 300lbs., STFH = 16.5". | $8,993.00 |
| 250PC198 | Quickie Q700 M SPC Single Power Option for SEDEO® PRO™ Seat. Included in Base Pricing: Q700 M Base, R-net 90amp Electronics for No Power Seat Functions, ProGrip™ Six-Wheel Independent Suspension, 14" Drive Wheels with Dual Density Inserts, 6" Flat Free Casters, ISO Occupied Tie-Down Brackets and 10amp Charger. Max Speed = 6mph, Weight Capacity = 300lbs., STFH = 16.5". | $8,993.00 |
| 250PC203 | Quickie Q700 M MPC Tilt/Recline for SEDEO® PRO™ Seat. Included in Base Pricing: Q700 M Base, R-net 90amp Electronics for No Power Seat Functions, ProGrip™ Six-Wheel Independent Suspension, 14" Drive Wheels with Dual Density Inserts, 6" Flat Free Casters, ISO Occupied Tie-Down Brackets and 10amp Charger. Max Speed = 6mph, Weight Capacity = 300lbs., STFH = 16.5". | $8,993.00 |
Standard Duty Mid Wheel Drive Base (End Item Number EIPW25 - PRO™ Seat)
| Option | Description | Retail |
|---|---|---|
| 250PC201 | Quickie Q700 M NPD No Power Option for SEDEO® PRO™ Seat. Included in Base Pricing: Q700 M Base, R-net 120amp Electronics for No Power Seat Functions, ProGrip™ Six-Wheel Independent Suspension, 14" Drive Wheels with Dual Density Inserts, 6" Flat Free Casters, ISO Occupied Tie-Down Brackets and 10amp Charger. Max Speed = 8mph, Weight Capacity = 300lbs., STFH = 16.5". | $10,781.00 |
| 250PC202 | Quickie Q700 M SPD Single Power Option for SEDEO® PRO™ Seat. Included in Base Pricing: Q700 M Base, R-net 120amp Electronics for No Power Seat Functions, ProGrip™ Six-Wheel Independent Suspension, 14" Drive Wheels with Dual Density Inserts, 6" Flat Free Casters, ISO Occupied Tie-Down Brackets and 10amp Charger. Max Speed = 8mph, Weight Capacity = 300lbs., STFH = 16.5". | $10,781.00 |
| 250PC205 | Quickie Q700 M MPD Tilt/Recline for SEDEO® PRO™ Seat. Included in Base Pricing: Q700 M Base, R-net 120amp Electronics for No Power Seat Functions, ProGrip™ Six-Wheel Independent Suspension, 14" Drive Wheels with Dual Density Inserts, 6" Flat Free Casters, ISO Occupied Tie-Down Brackets and 10amp Charger. Max Speed = 8mph, Weight Capacity = 300lbs., STFH = 16.5". | $10,781.00 |
Additional Options & Specifications
| Base | Option | Description | Retail | |
|---|---|---|---|---|
| User Weight | 250WG23 | Up to 300 lbs. | NC | |
| Motor Package | 250PF99 | 4-pole 10 kph / 6 mph | NC | |
| 250PF100 | 4-pole 12.5 kph / 8 mph | NC | ||
| 250PF101 | 4-pole 12.5 kph / 8 mph | $1,268.00 | ||
| Tracking | 250MI01 | SureTrac® Module & Motor Encoders (Improves drive tracking) | $1,696.00 | |
| Drive Wheels | 250DW58 | Drive Wheel, 14", Dual Density, Knobby, Black | NC | |
| Caster Wheels | 250CW55 | Caster Wheels 6", Solid, Black | NC | |
| Shroud Colour | 250C119 | Matte Black | NC | |
| 250C165 | Candy Apple Red | NC | ||
| 250C166 | Candy Blue | NC | ||
| 250C167 | Candy Purple | NC | ||
| 250C176 | Green Apple | NC | ||
| 250C178 | Pearl Pink | NC | ||
| 250C182 | Silver | NC | ||
| 250C125 | Pearl White | NC | ||
| Colour Accents | 250EZ20 | Green | NC | |
| 250EZ22 | Black | NC | ||
| 250EZ21 | Blue | NC | ||
| 250EZ23 | Orange | NC | ||
| 250EZ24 | Red | NC | ||
| 250EZ25 | Silver | NC | ||
| 250EZ19 | White | NC | ||
| Service Decals | 250D10 | Army | NC | |
| 250D11 | Air Force | NC | ||
| 250D13 | Marines | NC | ||
| 250D14 | Navy | NC | ||
| 250D15 | Purple Heart | NC | ||
| ISO Transit Tie Downs | 250T050 | ISO Transit Package | NC | |
| LED Lights | 250L108 | LED Fender Lights | $646.00 | |
| 250L109 | LED Fender Lights (Available with Multi-Power Only) | NC | ||
| 250L102 | Omit LED Lights | NC | ||
Seat HeightsNote: Available seat-to-floor heights are dependent on 2 options: 1- Battery Size and 2- Powered Seating. Use the matrix below to determine available ranges for your desired options. Measured from front of seat pan to floor with 0° frame angle. |
||||
| Seat Height | Power Seating | No Power Seating | PRO ADVANCED Recline (w/o Elevate / w/ Elevate) | Retail |
| 16.5" | Group 34 | Group 34 | N/A / N/A | NC |
| 17" | Group 34 | GP24 or GP34 | GP34 / GP34 | NC |
| 17.5" | Group 34 | GP24 or GP34 | GP34 / GP34 | NC |
| 18" | GP24 or GP34 | GP24 or GP34 | GP24/GP34 / GP34 | NC |
| 18.5" | GP24 or GP34 | GP24 or GP34 | GP24/GP34 / GP24/GP34 | NC |
| 19" | GP24 or GP34 | GP24 or GP34 | GP24/GP34 / GP24/GP34 | NC |
Batteries and Chargers |
||||
| Group 24 Battery Options (Recommended for max daily range) | ||||
| Option | Description | Retail | ||
| 250AG25 | GP24 Flat Top Pair w/Strap MK Gel | $955.00 | ||
| 250AG26 | GP24 Flat Top Pair w/Strap AGM | $915.00 | ||
| Group 34 Battery Options (Required for lower seat-to-floor heights) | ||||
| Option | Description | Retail | ||
| 250AG27 | GP34 Flat Top Pair w/Straps MK Gel | $955.00 | ||
| 250AG29 | GP34 Flat Top Pair w/Straps AGM | $863.00 | ||
| Omit Batteries | 250AG24 | Battery Harnesses Only (Omit Batteries) | NC | |
| Chargers | 250BJ28 | 10A Dual Mode (Compact) | NC | |
Powered Seating Options
| Option | Description | Retail |
|---|---|---|
Seat Elevator |
||
| 250P108 | C-Me® Seat Elevator, Powered, 300 mm / 12" (C-Me speed up to 3 mph) | $3,477.00 |
| 250P107 | Seat Elevator, Powered, 12" (Required for Anterior Tilt) | $3,477.00 |
Seat Tilt |
||
| 250PA35 | Posterior 50° Tilt | $8,663.00 |
Seat Recline |
||
| 250PA37 | 150° Powered Recline w/ 4" Shear Reduction | $8,001.00 |
Seat Tilt/Recline |
||
| 250PA41 | Posterior 50° Tilt and 150° Recline Powered, w/ 4" Shear Reduction | $13,275.00 |
| 250PA62 | Posterior 50° Tilt and PRO ADVANCED 165° Recline Powered, w/ 7" Shear Reduction | $13,785.00 |
Seat Anterior Tilt |
||
| 250TG02 | Anterior Tilt 0° to 30° | $3,329.00 |
Power Recline Backrest Preset Home Angle |
||
| 250QK1 | 90° | NC |
| 250QK2 | 95° (Default Position) | NC |
Pre Set Seat Frame Angle (No Power Seating Options, Increases Seat to Floor Height) |
||
| 250FA10 | 0° (Adds 0" to STFH) | NC |
| 250FA3 | 3° (Adds 1" to STFH) | NC |
Backrest Frame Type (N/A with Powered Recline) |
||
| 250BF10 | Tool Angle Adjustable Back, 90°-120° | NC |
| 250BF11 | User Adjustable Manual Semi-Recline Back, 90°-130°, Right (Adjustment lever mounted on opposite side of joystick) | $824.00 |
| 250BF12 | User Adjustable Manual Semi-Recline Back, 90°-130°, Left (Adjustment lever mounted on opposite side of joystick) | $824.00 |
Backrest Frame Option (N/A with PRO ADVANCED) |
||
| 250BF13 | Flip Down, Quick Release | $179.00 |
Back Cushion Type |
||
| 250BT134 | SEDEO® Back Cushion (Choose Seating in Section A) (N/A with PRO ADVANCED) | NC |
| 250BT138 | JAY® Syncra™ (Choose Seating in Section B) | NC |
| 250BT135 | JAY® J3® (Choose Seating in Section C) | NC |
| 250BT137 | SEDEO® Aftermarket Back Adapter (Height adjustable round tubes for traditional mounting) | $633.00 |
| 250BT133 | OMIT (For personalized mounting. No headrest mount) | NC |
SEDEO® Backrest Dimensions
(N/A with PRO ADVANCED)
| Back Width | Description | Retail |
|---|---|---|
| 400mm / 16" | 250BN28 | NC |
| 460mm / 18" | 250BN29 | NC |
| 500mm / 20" | 250BN30 | NC |
| 560mm / 22" | 250BN31 | NC |
Back Shell Height |
||
| 460mm / 18" | 250B255 (Tool Angle Adjust: 22"-23", 150° Recline: 23"-25") | NC |
| 560mm / 22" | 250B256 (Tool Angle Adjust: 24"-27", 150° Recline: 26"-29") | NC |
| 660mm / 26" | 250B257 (Tool Angle Adjust: 28"-30", 150° Recline: 30") | NC |
Installed Back Height - (From Pan to Top of Back) |
||
| 22" | 250JR32 | NC |
| 23" | 250JR33 | NC |
| 24" | 250JR34 | NC |
| 25" | 250JR35 | NC |
| 26" | 250JR36 | NC |
| 27" | 250JR37 | NC |
| 28" | 250JR38 | NC |
| 29" | 250JR39 | NC |
| 30" | 250JR40 | NC |
JAY® Syncra™ Seating
B - JAY® Syncra™ Back
| Option | Description | Retail |
|---|---|---|
| 250JP14 | JAY® Syncra™ Back 16-20" Wide with 3" Contour Depth | $1,339.00 |
| 250JP15 | JAY® Syncra™ Back 22" Wide with 3" Contour Depth | $1,339.00 |
B - JAY® Syncra™ Back Width |
||
| Back can be ordered a different width than seat pan. Armrest will be adjusted to back width ordered. | ||
| 250JQ07 | 16" Wide (Adjustment range 16 to 17" Wide)* | NC |
| 250JQ08 | 18" Wide (Adjustment range 18 to 19" Wide)* | NC |
| 250JQ09 | 20" Wide (Adjustment range 20 to 21" Wide)* | NC |
| 250JQ10 | 22" Wide (Adjustment range 22 to 23" Wide) | NC |
| *Additional +1" of shell width adjustment is achievable. Requires purchase of 1" larger foam and upholstery separately. | ||
B - JAY® Syncra™ Back Shell Options and Height Ranges |
||
| JAY® Syncra™ Back shells are mounted with a minimim 5.5" gap between the bottom of the shell to the seat pan to accommodate the mechanical shear. Back height can be adjusted in the field within the ranges shown based on the back frame type. | ||
JAY® Syncra™ Shell Height |
||
| 250JR42 | 16" Tall Shell (22" to 24" Back Height) | NC |
| 250JR43 | 18" Tall Shell (24" to 26" Back Height) | NC |
| 250JR44 | 20" Tall Shell (26" to 28" Back Height) | NC |
| 250JR45 | 22" Tall Shell (28" to 30" Back Height) | NC |
JAY® Syncra™ Back Installed Back Height (From Pan to Top of Back) |
||
| 250JR50 | 22" (16" Shell Height) | NC |
| 250JR51 | 23" (16" Shell Height) | NC |
| 250JR52 | 24" (16" Shell Height) | NC |
| 250JR53 | 24" (18" Shell Height) | NC |
| 250JR54 | 25" (18" Shell Height) | NC |
| 250JR55 | 26" (18" Shell Height) | NC |
| 250JR56 | 26" (20" Shell Height) | NC |
| 250JR57 | 27" (20" Shell Height) | NC |
| 250JR58 | 28" (20" Shell Height) | NC |
| 250JR67 | 28" (22" Shell Height) | NC |
| 250JR68 | 29" (22" Shell Height) | NC |
| 250JR69 | 30" (22" Shell Height) | NC |
B - JAY® Syncra™ Back Upholstery |
||
| 250BU96 | Syncra™ Premium Leatherette | NC |
| 250BU97 | Syncra™ Stretch | NC |
JAY® J3® Back
C - JAY® J3® Back - Contour
| Option | Description | Retail |
|---|---|---|
| 250JP01 | J3® PA Back for 16"-20" Wide | $912.00 |
| 250JP02 | J3® PA Back for 22" Wide | $1,941.00 |
| 250JP11 | J3® PL Back for 16"-20" Wide | $986.00 |
| 250JP13 | J3® PD Back for 16"-20" Wide (18" and 21" shell height only) | $1,068.00 |
C - JAY® J3® Back Width |
||
| Back can be ordered a different width than seat pan. Armrest will be adjusted to back width ordered. | ||
| 250JQ02 | 16" | NC |
| 250JQ03 | 18" | NC |
| 250JQ04 | 20" | NC |
| 250JQ05 | 22" | NC |
C - JAY® J3® Back Shell Options and Height Ranges |
||
| JAY® J3® shells are mounted with a minimim 4" gap between the bottom of the shell to the seat pan to accommodate the mechanical shear. Back height can be adjusted in the field within the ranges shown, based on the back frame type and the amount of usable hardware adjustability. | ||
JAY® J3® Shell Height |
||
| 250JR41 | 15" tall shell (Upper Thoracic Med) for 22" Wide (Tool Angle Adjust: 22"-23", 150° Recline: 22"-23", PRO ADVANCED: 21"-24") | NC |
| 250JR14 | 16.5" tall shell (Upper Thoracic Short) (Tool Angle Adjust: 21"-23", 150° Recline: 22"-24", PRO ADVANCED: 21"-24") | NC |
| 250JR15 | 18" tall shell (Upper Thoracic Med) (Tool Angle Adjust: 22"-24", 150° Recline: 23"-25", PRO ADVANCED: 22"-26") | NC |
| 250JR16 | 19.5" tall shell (Upper Thoracic Tall) (Tool Angle Adjust: 24"-26", 150° Recline: 24"-26", PRO ADVANCED: 23"-27") | NC |
| 250JR18 | 18" tall shell (Shoulder Height) for 22" wide (Tool Angle Adjust: 24", 150° Recline: 24", PRO ADVANCED: 21"-25") | NC |
| 250JR17 | 21" tall shell (Shoulder Height) (Tool Angle Adjust: 24"-26", 150° Recline: 25"-28", PRO ADVANCED: 25"-28") | NC |
| 250JR27 | 22.5" tall shell (Shoulder Height) (Tool Angle Adjust: 26"-28", 150° Recline: 27"-30", PRO ADVANCED: 26"-29") | NC |
| 250JR28 | 24" tall shell (Shoulder Height) (Tool Angle Adjust: 27"-29", 150° Recline: 28"-30", PRO ADVANCED: 28"-30") | NC |
JAY® J3® Installed Back Height (From Pan to Top of Back) |
||
| 250JR29 | 21" | NC |
| 250JR19 | 22" | NC |
| 250JR20 | 23" | NC |
| 250JR21 | 24" | NC |
| 250JR22 | 25" | NC |
| 250JR23 | 26" | NC |
| 250JR24 | 27" | NC |
| 250JR25 | 28" | NC |
| 250JR30 | 29" | NC |
| 250JR31 | 30" | NC |
Anterior Thoracic Support
| Option | Description | Retail |
|---|---|---|
C - JAY® Anterior Thoracic Support |
||
| 250K10 | Classic-Structure Pull Down Harness (4 point strap, only available with JAY® backrest) - Medium (ATS8302) | $322.00 |
| 250K11 | Classic-Structure Pull Down Harness (4 point strap, only available with JAY® backrest) - Large (ATS8303) | $322.00 |
JAY® Lateral Thoracic Swing-Away Supports
(Requires Pad, Upholstery and Mount)
| Option | Description | Retail |
|---|---|---|
JAY® Lateral Thoracic Support Pads |
||
| 250JW35 | Lateral Thoracic (L x H) 100 mm x 127 mm / 4" x 5" Pad - Right | $75.00 |
| 250JW38 | Lateral Thoracic (L x H) 100 mm x 127 mm / 4" x 5" Pad - Left | $75.00 |
| 250JW36 | Lateral Thoracic (L x H) 100 mm x 152 mm / 4" x 6" Pad - Right | $75.00 |
| 250JW39 | Lateral Thoracic (L x H) 100 mm x 52 mm / 4" x 6" Pad - Left | $75.00 |
| 250JW37 | Lateral Thoracic (L x H) 152 mm x 100 mm / 6" x 4" Pad - Right | $75.00 |
| 250JW40 | Lateral Thoracic (L x H) 152 mm x 100 mm / 6" x 4" Pad - Left | $75.00 |
JAY® Lateral Thoracic Support Pad Upholstery |
||
| 250NU01 | Syncra™ Premium Leatherette | NC |
| 250NU02 | Syncra™ Stretch | NC |
JAY® Lateral Thoracic Swing-Away Mount |
||
| 250JW41 | Lateral Thoracic Swing Away Bracket - Right | $334.00 |
| 250JW42 | Lateral Thoracic Swing Away Bracket - Left | $334.00 |
JAY® Syncra™ Fixed Lateral Support Accessory
| Option | Description | Retail |
|---|---|---|
| JAY® Fixed Lateral Support Accessory Hardware (JAY® Fixed Lateral Support is height adjustable) | ||
| 250JW33 | Fixed Lateral Support Accessory (L x H) 90 mm x 140 mm / 3.5" x 8" - Right | $147.00 |
| 250JW34 | Fixed Lateral Support Accessory (L x H) 90 mm x 140 mm / 3.5" x 8" - Left | $147.00 |
Headrests
(Requires Pad, Upholstery, & Mount)
| Option | Description | Retail |
|---|---|---|
Headrest Pad |
||
| 250HE36 | SEDEO® Pad Small With Cover (LxH) 240 x 150 mm / 10" x 6" (Can only be used with Multi Position Headrest Mount with Quick Release and SEDEO® Upholstery) | $227.00 |
| 250HE38 | Whitmyer® Plush Headrest Pad 203 mm / 8" | $377.00 |
| 250HE39 | Whitmyer® Plush Headrest Pad 254 mm / 10" | $377.00 |
| 250HE44 | Whitmyer® Plush Headrest Pad 356 mm / 14" | $377.00 |
| 250HE46 | Whitmyer® Adjust-A-Plush Headrest Pad Medium (Adjustable from 7 to 16" Wide x 4" Tall) | $438.00 |
| 250HE48 | OMIT Headrest Pad | NC |
Headrest Pad Upholstery |
||
| 250NU10 | SEDEO® Upholstery | NC |
| 250NU04 | Syncra™ Premium Leatherette | NC |
| 250NU05 | Syncra™ Stretch | NC |
| 250NU11 | Whitmyer® Lycra | NC |
Headrest Mounts
| Option | Description | Retail |
|---|---|---|
| 250MH32 | SEDEO® Multi-Position Headrest Mount with Quick Release (Only available with SEDEO® Pad) | $557.00 |
| 250MH33 | Whitmyer® Linx Headrest Mount with Quick Release | $243.00 |
| 250MH34 | Whitmyer® Linx-2 Headrest Mount with Quick Release | $298.00 |
| 250MH35 | Whitmyer® AXYS Headrest Mount with Quick Release | $247.00 |
| 250MH17 | OMIT Headrest Mount | NC |
Push Handles & Seat Rails
| Option | Description | Retail | |
|---|---|---|---|
| Push Handles | 250PH27 | Height Adjustable Push Handles | $61.00 |
| Seat Frame Rails | 250SN14 | Seat Rail Short (For effective seat depth 14" to 18") | $806.00 |
| 250SN15 | Seat Rail Long (For effective seat depth 17" to 22") | $806.00 |
Seat Cushion Type
| Option | Description | Retail |
|---|---|---|
| 250ST81 | JAY® Syncra™ Cushion (See Section D) | NC |
| 250ST80 | JAY® (See Section E) | NC |
| 250ST75 | Omit | NC |
C - Seat Size
| Option | Description | Retail |
|---|---|---|
Seat Pan Width |
||
| 250R53 | 16" | NC |
| 250R54 | 17" | NC |
| 250R55 | 18" | NC |
| 250R56 | 19" | NC |
| 250R57 | 20" | NC |
| 250R58 | 21" (Not available with JAY® Syncra™ Cushions) | NC |
| 250R59 | 22" | NC |
Seat Pan Depth (Front of seat pan to front of back cushion – effective depth) |
||
| 250RF52 | 14" (N/A with PRO ADVANCED) | NC |
| 250RF53 | 15" (N/A with PRO ADVANCED) | NC |
| 250RF51 | 16" (N/A with PRO ADVANCED) | NC |
| 250RF45 | 17" | NC |
| 250RF46 | 18" | NC |
| 250RF47 | 19" | NC |
| 250RF48 | 20" | NC |
| 250RF49 | 21" (Not available with JAY® Syncra™ Cushions) | NC |
| 250RF50 | 22" | NC |
D - JAY® Syncra™ Cushion
| Option | Description | Retail |
|---|---|---|
| P. 23 (JAY Your Way modifications available through Customer Service (800-263-3390) | ||
| 250CU89 | JAY® Syncra™ Cushion featuring JAY Flow® Fluid with Cryo™ Technology (16" to 20" wide) | $1,017.00 |
| 250CU90 | JAY® Syncra™ Cushion featuring JAY Flow® Fluid with Cryo™ Technology (22" wide) | $1,125.00 |
JAY® Syncra™ Cushion Cover Upholstery |
||
| 250YR73 | Syncra™ Premium Leatherette | NC |
| 250YR74 | Syncra™ Stretch | NC |
E - JAY® Seat Cushion
| Option | Description | Retail |
|---|---|---|
| 250CU59 | JAY® Ion® (Sizes 16" - 21" Wide) | $657.00 |
| 250CU60 | JAY® Ion® (Size 22" Wide) | $698.00 |
| 250CU61 | JAY® Union® (Sizes 16" - 21" Wide) | $764.00 |
| 250CU62 | JAY® Union® (Size 22" Wide) | $806.00 |
| 250CU64 | JAY® Fusion® (Sizes 16"-21" Wide) | $1,045.00 |
| 250CU65 | JAY® Fusion® (Size 22" Wide) | $1,188.00 |
Positioning Supports & Accessories
| Option | Description | Retail |
|---|---|---|
Knee and Thigh Swing-Away Support Pads |
||
Lateral Knee Support Pads and Hardware (must pick pad and mount) |
||
| 250XY05 | Lateral Knee Support Pad, Right (4" round) | $247.00 |
| 250XY06 | Lateral Knee Support Pad, Left (4" round) | $247.00 |
| 250XX08 | Lateral Swing-Away Bracket Knee - Right | $325.00 |
| 250XX09 | Lateral Swing-Away Bracket Knee - Left | $325.00 |
Lateral Thigh Support Pads and Hardware (must pick pad and mount) |
||
| 250KF22 | Lateral Thigh Support Pad Short - Right (5"x5") | $146.00 |
| 250KF23 | Lateral Thigh Support Pad Short - Left (5"x5") | $146.00 |
| 250KF24 | Lateral Thigh Support Pad Long - Right (5"x7") | $146.00 |
| 250KF25 | Lateral Thigh Support Pad Long - Left (5"x7") | $146.00 |
| 250KF26 | Lateral Thigh Removable Mount - Right | $325.00 |
| 250KF27 | Lateral Thigh Removable Mount - Left | $325.00 |
JAY® Lateral Thigh Supports (Must pick pad, upholstery, and mount) |
||
JAY® Lateral Thigh Support Pads |
||
| 250KF16 | Lateral Thigh Support Pad Standard, Right (8.25" x 3.25") | $146.00 |
| 250KF17 | Lateral Thigh Support Pad Standard, Left (8.25" x 3.25") | $146.00 |
| 250KF18 | Lateral Thigh Support Pad Large, Right (12" x 3.25") | $146.00 |
| 250KF19 | Lateral Thigh Support Pad Large, Left (12" x 3.25") | $146.00 |
JAY® Lateral Thigh Support Pad Upholstery |
||
| 250NU07 | Syncra™ Premium Leatherette | NC |
| 250NU08 | Syncra™ Stretch | NC |
JAY® Lateral Thigh Removable Mount |
||
| 250KF20 | Lateral Thigh Removable Mount - Right | $325.00 |
| 250KF21 | Lateral Thigh Removable Mount - Left | $325.00 |
Armrest Structure |
||
| 250EG35 | Reclining, Flip Back, Long (Height adjustable 9" to 15") | NC |
| 250EG41 | Reclining, Flip Back, Short (Best used with shorter seat depths) (Height adjustable 9" to 15") | NC |
| 250EG36 | Reclining, Flip Back with 2-point post locking arm (Height adjustable 11" to 15" x .625") | $351.00 |
| 250EG51 | Reclining, Flip Back, Dual Link Armrest (No Charge for Multi-Power) (Required for PRO ADVANCED) (Height adjustable 8" to 15" including length and lateral adjustment) | NC |
| 250EG52 | Reclining, Flip Back, Dual Link Armrest (Height adjustable 8" to 15" including length and lateral adjustment) | $457.00 |
| 250EG50 | Dual Post HA Removable | NC |
Arm Pads
| Option | Description | Retail |
|---|---|---|
SEDEO® Armrest Pad |
||
| 250AB43 | 300 mm / 12", Integral Foam, Right | NC |
| 250AE43 | 300 mm / 12", Integral Foam, Left | NC |
| 250AB44 | 400 mm / 16", Integral Foam, Right | NC |
| 250AE44 | 400 mm / 16", Integral Foam, Left | NC |
Comfort Arm Pad (Foam) |
||
| 250AB46 | 2" Wide Right | $113.00 |
| 250AE46 | 2" Wide Left | $113.00 |
Comfort Arm Pad (Gel) |
||
| 250AB48 | 2" Wide Right | $213.00 |
| 250AE48 | 2" Wide Left | $213.00 |
Dual Post HA Armrest Pads |
||
| 250AB74 | ARMPAD 10" CLASSIC DSK FOAM R | NC |
| 250AB75 | ARMPAD 14" CLASSIC FLL FOAM R | NC |
| 250AE74 | ARMPAD 10" CLASSIC DSK FOAM L | NC |
| 250AE75 | ARMPAD 14" CLASSIC FLL FOAM L | NC |
| 250AB76 | ARMPAD 10" WTRFLL DSK FOAM R | NC |
| 250AB77 | ARMPAD14" WTRFLL FLL FOAM R | NC |
| 250AE76 | ARMPAD 10" WTRFLL DSK FOAM L | NC |
| 250AE77 | ARMPAD 14" WTRFLL FLL FOAM L | NC |
Ottobock® Arm Troughs |
||
| 250AE06 | Ottobock® Arm Trough, Med (12"), Left | $139.00 |
| 250AB06 | Ottobock® Arm Trough, Med (12"), Right | $139.00 |
| 250AE07 | Ottobock® Arm Trough, Large (14") Left, | $139.00 |
| 250AB07 | Ottobock® Arm Trough, Large (14"), Right | $139.00 |
| 250OL01 | Ottobock® Hand Pad, Med (7"), Left | $70.00 |
| 250OR01 | Ottobock® Hand Pad, Med (7"), Right | $70.00 |
| 250OL02 | Ottobock® Hand Pad, Large (9"), Left | $70.00 |
| 250OR02 | Ottobock® Hand Pad, Large (9"), Right | $70.00 |
| 250AE78 | Ottobock® One Piece Arm Trough, (18"), Left | $198.00 |
| 250AB78 | Ottobock® One Piece Arm Trough, (18"), Right | $198.00 |
Elbow Support & Side Guards
| Option | Description | Retail |
|---|---|---|
Elbow Support |
||
| 2503A02 | Elbow Support Pad, RH 3" x 10" (Includes side support) | $228.00 |
| 2503A03 | Elbow Support Pad, LH 3" x 10" (Includes side support) | $228.00 |
| 2503A06 | Elbow Support Pad, RH 3" x 3" | $167.00 |
| 2503A07 | Elbow Support Pad, LH 3" x 3" | $167.00 |
| 2503A04 | Swing-Away Elbow Support Hardware, RH | $279.00 |
| 2503A05 | Swing-Away Elbow Support Hardware, LH | $279.00 |
Side Guards (Pair) |
||
| 250SG44 | Side Guards Integral Foam (11"L x 5.5"H) (N/A with Reclining Armrests) | $356.00 |
Legrests
| Option | Description | Retail |
|---|---|---|
Fixed Centermount Legrest |
||
| 250H183 | SEDEO® Fixed Centermount Legrest (3" to 17.5" Leg Length) | $351.00 |
| 250H184 | Fixed Centermount Legrest, Short (Includes Calf Pads & Single Footplate) (11.5" to 14.5" Leg Length) | NC |
| 250H185 | Fixed Centermount Legrest, Long (Includes Calf Pads & Single Footplate) (13.5" to 18.5" Leg Length) | NC |
Power Centermount Legrest |
||
| 250H175 | Power Centermount Legrest, 90° - 0° Angle, 7.5" Extension (Mechanical Articulation) (5" to 17.5" Leg Length) | $2,487.00 |
| 250H109 | Power Centermount Legrest, 90° - 0° Angle, 7.5" Extension (Powered Articulation) (3" to 17.5" Leg Length) (Required for PRO ADVANCED) | $3,435.00 |
Power Centermount Legrest Accessories |
||
Footplates |
||
| 250F127 | Dual, Height, Width and Angle Adjustable, Standard (14"W x 10"D) | $284.00 |
| 250F128 | Dual, Height, Width and Angle Adjustable, Large (16"W x 12"D) | $284.00 |
Footplate Accessories (Available with Power Centermounts) |
||
| 250D168 | Extra Large Centermount Footplate (Single Footplate Overlay 16"W x 12"D) | $315.00 |
| 250D169 | Footplate Connector Link (Attaches footplates together) | $96.00 |
| 250D157 | Gel Footpads (Pair, LH and RH) | $401.00 |
Calf Pad Options |
||
| 250DI34 | Calf Pads, Pair, Standard | NC |
| 250DI35 | Calf Pads, Pair, Padded | $356.00 |
Knee Block (Required for Anterior Tilt) |
||
| 250DI37 | Knee Blocks: Dual, Height, Width and Angle Adjustable | $704.00 |
| 250DI55 | Knee Block Quick Release Removable Hardware | $179.00 |
SEDEO® PRO™ Swing-Away Legrest (Pair) |
||
| 250H177 | Legrests, Swing-Away, 70°, SEDEO® PRO™ (14" to 21" Leg Length) | NC |
| 250H178 | Legrests, Manual Elevating, Swing-Away, SEDEO® PRO™ (Includes Padded Calf Pads) (14".5 to 21.5" Leg Length) | $605.00 |
| 250H179 | Legrests, Power Elevating, Swing-Away, SEDEO® PRO™ (Includes Padded Calf Pads) (15.5" to 22.5" Leg Length) | $3,435.00 |
| 250DI76 | Omit Legrests | NC |
Swing-Away Legrest Options
| Option | Description | Retail |
|---|---|---|
Swing-Away Legrest Footplates |
||
| 250F369 | Angle Adjustable Flip-Up Footplates | $284.00 |
Swing-Away Legrest Calf Supports |
||
| 250DI42 | Calf Support, Depth Adjustable, Padded (6.5" to 8" Wide, Depending On Chair Width, x 9.5" Tall) | $512.00 |
Swing-Away Legrest Options |
||
| 250DI44 | Heel Loops | NC |
| 250KG4 | Knee Pads, Integral Foam (2.5" Wide x 4.5" Tall) | $282.00 |
SEDEO® Lower Extremity Swing-Away Support |
||
| 250VD01 | Lower Extremity Support, Padded, Swing-Away, SEDEO®, Right | $512.00 |
| 250VD02 | Lower Extremity Support, Padded, Swing-Away, SEDEO®, Left | $512.00 |
Pelvic Positioning Belts & Chest Straps
| Option | Description | Retail |
|---|---|---|
Pelvic Positioning Belts |
||
| 250A837 | Positioning Belt, Auto Style Buckle, 50 mm 1600 mm / 2" | NC |
| 250A839 | Positioning Belt, Aircraft Buckle, 50 mm x 1300 mm / 2" | NC |
| 250A840 | Positioning Belt, Aircraft Buckle, Padded 50 mm x 1300 mm / 2" | $103.00 |
| 250A845 | Bodypoint - Evoflex Pelvic Stabilizer Belt | $216.00 |
| 250A846 | Bodypoint - Evoflex Pelvic Stabilizer Belt with Extension | $271.00 |
Chest Straps |
||
| 250ZR06 | Chest Strap, 2-Point, Padded (Required) | NC |
| 250ZR07 | Additional Chest Strap, 2-Point, Padded | $351.00 |
Chest Bars |
||
| 250ZR08 | Chest Bar, Detachable, Round Pad | $704.00 |
| 250ZR09 | Chest Bar, Detachable, Flat Pad, 200 mm x 100 mm | $748.00 |
Accessories
| Option | Description | Retail |
|---|---|---|
Ventilator Option |
||
| 250VT12 | Vent Tray Fixed (Pulmonetic LTV Models) | $609.00 |
O2 Tank Option |
||
| 250A718 | O2 Tank Holder Mounted to Backrest (D and E Styles) | $391.00 |
Wheelchair Tray Table |
||
| 2507A09 | Tray, Swing-Away | $381.00 |
Backpack |
||
| 250A1 | Black Utility | $112.00 |
Medial Thigh Support (N/A with Centermount Legrests) |
||
| 2508A80 | Medial Thigh Support | $271.00 |
| 2508A81 | Pommel Swing-Away Hardware | $390.00 |
Miscellaneous Accessories
| Option | Description | Retail |
|---|---|---|
| 2508A59 | Transfer Bar (Pair) | $493.00 |
| 2508A52 | Ram Mount Phone | $77.00 |
| 2508A53 | Ram Mount Tablet | $308.00 |
| 2508A54 | Ram Mount Cup Holder | $77.00 |
| 2508A58 | Rear View Mirror | $77.00 |
| 250A611 | Crutch Holder (N/A w/Power Recline) | $174.00 |
| 2508A73 | Bag for Armrest | $77.00 |
| 2508A75 | Reflectors (Backrest shroud mounted) | $115.00 |
| 2509A10 | Utility Hooks | $30.00 |
Joystick / Electronics
| Option | Description | Retail |
|---|---|---|
R-net Joystick (Remote) |
||
| 250J121 | Standard LED Joystick (w/o Screen Display) | NC |
| 250J116 | Colour Joystick (2.3" Colour LCD Screen Display, CJSM1) | NC |
| 250J118 | High Resolution Colour Joystick,(CJSM2+BT) 3.5" Colour LCD Display, Paddle Switches, Programmable Shortcut Keys, ICONs, Stereo Jack, IR and dual (IOS/Android) Bluetooth control | $1,162.00 |
| 250J119 | Omit Remote Control (Required with arm mounted specialty controls) | NC |
Joystick Mounting |
||
| 250JM34 | Fixed on Armrest | NC |
| 250JM35 | Parallel Swing-Away | $447.00 |
| 250JM36 | Link-It Mid Line Mount on Armrest (Swing-Away) | $447.00 |
| 250JM49 | Attendant (Available with LED or CJSM1 only. Mounted to Push Handle) | NC |
Joystick Mount (Location) |
||
| 250HM16 | Right Hand | NC |
| 250HM17 | Left Hand | NC |
Display Language Selection R-net |
||
| 250L1 | English | NC |
| 250L3 | French | NC |
| 250L7 | Spanish | NC |
Joystick Handle (Optional) |
||
| 250JH13 | Ball Handle | $110.00 |
| 250JH15 | T-Handle | $110.00 |
| 250JH24 | Bodypoint - Rubber Dome Joystick Handle | $216.00 |
| 250JH25 | Bodypoint - U-Shaped Joystick Handle (4 inch) | $216.00 |
| 250JH26 | Bodypoint - Grooved Mushroom Joystick | $216.00 |
Electronic Programmers |
||
| 250PR13 | R-net PC Wireless Programmer | $613.00 |
R-net Power Modules
| Option | Description | Retail |
|---|---|---|
| 250ER11 | Power Module, R-net, 120A, Non-Expandable | NC |
| 250ER10 | Power Module, R-net, 120A, Expandable Required for specialty controls or 3+ actuators | $102.00 |
| 250EX09 | Expandable 120A Controller - R-net | NC |
| 250EX10 | Harness for 120A Expandable Controller | NC |
| 250ER18 | Power Module, R-net, 90A, Non-Expandable (Available with No Power and Single Power) | NC |
| 250ER17 | Power Module, R-net, 90A, Expandable Required for specialty controls or 3+ actuators | $102.00 |
| 250EX15 | Expandable 90A Controller - R-net | NC |
| 250EX16 | Harness for 90A Expandable Controller | NC |
Seating Control
| Option | Description | Retail |
|---|---|---|
Powered Seating Control |
||
| 250E040 | Omit Thru-Drive (Requires Switch Control) | NC |
| 250E037 | Thru-Drive Control for 1 Actuator | $1,443.00 |
| 250E038 | Thru-Drive Control for 2+ Actuators | $2,903.00 |
| 250E032 | CxSM, Thru-Drive Control for 2+ Actuators (Required for PRO ADVANCED) | $2,903.00 |
Switch Control (Available with Omit Thru-Drive only) (1 actuator for Tilt or Elevate only) |
||
| 250E033 | Dual Toggle for 1 Actuator | NC |
| 250E034 | 2.5" Single Button Switch for 1 Actuator (Button switches are not mounted) | NC |
| 250E041 | Ctrl+5 Switch Box with Voice Activation for 2 Actuators or More | NC |
Additional Power Seating Control (Available with Thru-Drive only) |
||
| 250QG11 | Ctrl+5 Switch Box with Voice Activation | $1,078.00 |
| 250QG12 | Ctrl+5 Switch Box with Voice Activation (Multi-power only, tilt/recline combo) | NC |
Dual Toggle Mounting Location |
||
| 250TN1 | Toggle Mount, Right | NC |
| 250TN2 | Toggle Mount, Left | NC |
Ctrl+5 Mounting Location (Will swing away if mounted in the same location as the joystick) |
||
| 250EY19 | Right Armrest | NC |
| 250EY20 | Left Armrest | NC |
| 250EY21 | Back Cane, Right | NC |
| 250EY24 | Back Cane, Left | NC |
Ctrl+5 Switch Type |
||
| 250EY22 | Push Buttons | NC |
| 250EY23 | Toggle Switches | $356.00 |
Attendant Controls |
||
| 2500A05 | Dual Control Module for Attendant | $1,225.00 |
| 2500A06 | R-net Colour LCD (CJSM1), Attendant Control Only | $1,225.00 |
Attendant Mounting Location
| Option | Description | Retail |
|---|---|---|
| 250DN5 | Right Back Cane | NC |
| 250DN6 | Left Back Cane | NC |
R-net Programming
| Option | Description | Retail |
|---|---|---|
Assignable Buttons |
||
| Assignable Button feature allows for personalization of joystick buttons and/or Ctrl+5 Switches allowing access to various wheelchair and seating functions. When enabled, chair will be pre-programmed with seating functions assigned to buttons on the joystick. Assignments can be changed via PC Dongle. | ||
| 250PM12 | Include Assignable Buttons | NC |
Power Centermount Footplate Extension Option |
||
| 250IE03 | Include 7.5" Powered Footplate Extension for Transfer Assist (Electronics programmed to allow footplates to be extended with or without legrest being raised.) Only available with Powered Articulation. | $592.00 |
R-net Omni2 Options |
||
| For Expandable Controls, choose all that apply. | ||
| 250ON14 | R-net Omni2 Only Input Control Module and 3.5" LCD Display w/ Built-In Infrared & Bluetooth Choose Mount Below | $2,384.00 |
| 250ON15 | R-net Omni2 Bundled Input Control Module and 3.5" LCD Display w/ Built-In Infrared & Bluetooth Bundled Omni2 Available w/ Switch-It Input Devices | NC |
Omni2 Mount |
||
| If used w/ Standard Joystick, it must be mounted opposite side. | ||
| 250DS14 | Link-It with Parallel Swing-Away Omni2 Mount w/ Rear Mounted Interface, Right | $698.00 |
| 250DS15 | Link-It with Parallel Swing-Away Omni2 Mount w/ Rear Mounted Interface, Left | $698.00 |
PRO ADVANCED Programming |
||
Biometric Repositioning |
||
| 250PM03 | Include Biometric Repositioning (Requires Memory Position #1, #2, #3 below) | NC |
Memory Seating |
||
| "Memory Seating" feature allows for up to six custom seating positions that are accessed either through the joystick, Ctrl+5, joystick shortcut keys or programmable jacks on Omni2 and joystick. Choose desired preset settings below. Default postions are dealer adjustable. | ||
| 250PM06 | Include #1 Memory Seating (Seated) (Required) | NC |
| 250PM07 | Include #2 Memory Seating (Supine) | NC |
| 250PM08 | Include #3 Memory Seating (Pressure Relief) | NC |
| 250PM09 | Include #4 Memory Seating (Feet Above Heart) | NC |
| 250PM10 | Include #5 Memory Seating (Transfer) | NC |
| 250PM11 | Include #6 Memory Seating (C-Me) | NC |
PRAR Pressure Relief Alert and Reminders |
||
| PRAR Pressure Relief Alert and Record feature provides programmable alerts to be set into the R-net electronics that will prompt the user when it is time to perform a pressure relief. The R-net system will record how often the pressure relief is completed or ignored. | ||
| 250PM14 | Include PRAR (Minimum requirement Memory Position #1 and #3) | NC |
Specialty Input Devices
| Option | Description | Retail |
|---|---|---|
Hand Control PackagesRequires Standard Joystick Omit / Only one hand control device can be ordered. |
||
Proportional Input Devices |
||
| 250EU14 | Switch-It MicroGuide | $3,844.00 |
| 250EU17 | Switch-It VersaGuide | $2,557.00 |
| 250EU18 | Switch-It VersaGuide EZ | $3,023.00 |
Mounting Position (Required) |
||
| 250EM04 | Link-It to the Backrest (Not Available w/ Omit Back Cushion Type) | $1,338.00 |
| 250EM05 | Link-It to the Fixed Joystick Mount | $416.00 |
| 250EM06 | Link-It to the Parallel Swing-Away Joystick Mount | $416.00 |
| 250EM07 | Link-It to the Midline Swing-Away | $1,480.00 |
| 250EM08 | Omit Mount | NC |
Mounting Platforms (Optional) Not available w/ Link-It to Backrest |
||
| 250MG16 | SunDisk Hand Tray (Only available w/ MicroSeries Joysticks) | $146.00 |
| 250MG15 | Bullet Hand Tray | $416.00 |
Mounting Location (Required) |
||
| 250IM09 | Right | NC |
| 250IM10 | Left | NC |
Switch Options |
||
| See Switch Selections (Maximum 2) | ||
Head Control Packages (Select headrest mount)Only one head control device can be ordered. |
||
Proportional Input Devices |
||
| 250EU25 | Switch-It DualPro® Proportional Head Array - Facial Pads | $7,057.00 |
| 250EU26 | Switch-It DualPro® Proportional Head Array - Spot Pads | $7,057.00 |
| 250EU51 | Switch-It Vigo Head Drive | $6,293.00 |
Switched Input Devices |
||
| 250EU28 | Switch-lt 3-Switch Head Array - Short Curved Wings | $6,154.00 |
| 250EU30 | Switch-lt 3-Switch Head Array - Long Curved Wings | $6,154.00 |
Switch Options |
||
| See Switch Selections (Maximum 2) | ||
Sip 'N Puff |
||
| 250ID73 | Switch-It Sip 'N Puff Combo Head Array with Link-It Hardware (Requires headrest mount) | $7,037.00 |
| 250ID74 | Switch-It OptiStop with Sip 'N Puff | $2,741.00 |
Headrest Mounts (Applies to Head/Sip 'N Puff control packages) |
||
| 250IJ13 | Whitmyer® Linx Headrest Mount with Quick Release | $247.00 |
| 250IJ14 | Whitmyer® Linx-2 Headrest Mount with Quick Release | $298.00 |
| 250IJ15 | Whitmyer® AXYS Headrest Mount with Quick Release | $247.00 |
Chin Control Packages
| Option | Description | Retail |
|---|---|---|
Proportional Input Devices |
||
| 250EU34 | Switch-It MicroGuide (Switches mounted to the headrest only.) | $4,529.00 |
| 250EU36 | Switch-It VersaGuide | $2,557.00 |
| 250EU37 | Switch-It VersaGuide EZ | $3,023.00 |
Mounting Position |
||
| 250EM09 | Link-It To Chin Harness, Small (150mm / 6") | $1,760.00 |
| 250EM10 | Link-It To Chin Harness, Large (220mm / 8") | $1,760.00 |
| 250EM11 | Link-It To Headrest (Swing-Away) | $1,760.00 |
| 250EM16 | Omit Mount | NC |
Input Device Mounting Location |
||
| 250IM13 | Right | NC |
| 250IM14 | Left | NC |
Switch Options |
||
| See Switch Selections | ||
Safety Devices |
||
| 250SA06 | Switch-It Remote Stop Switch - XLR Connector | $1,317.00 |
Switched Driving Packages |
||
| 250SW44 | Switch-It™ Cool Cube with DB9 connector for proximity/proportional switch driving. (Pro Spot proportional switches are required if proportional driving is desired.) (For non-proportional driving, single switches can be used.) | $3,949.00 |
Switches
| Option | Description | Retail |
|---|---|---|
| Single switches can be programmed to activate any function of the wheelchair including: On/Off, Mode, Profile, Speeds, Seating, Memory Positions, Horn, Lights & Indicators, IR functions, Bluetooth mouse clicks, Environmental Controls when plugged into assignable port. Switches can connect via: Joysticks (Standard, Micro series, Versa series) Omni2, SJX6 Hub, head controls | ||
| Switch ordering instructions: 1. Select switch type and quantity in Section "A" using columns below. (Max 6 switches. See limitations below.) 2. Select switch mounting position from Section "B" using corresponding switch column. 3. Select switch mounting location from Section "C" using corresponding switch column. | ||
Section A - Switch Selections |
||
Single Function Switches - Mechanical Switches |
||
| 2.5" Single Switch - Black | Switch 1 | $230.00 |
| 2.5" Single Switch - Blue | Switch 1 | $230.00 |
| 2.5" Single Switch - Green | Switch 1 | $230.00 |
| 2.5" Single Switch - Red | Switch 1 | $230.00 |
| 2.5" Single Switch - Yellow | Switch 1 | $230.00 |
| Egg Switch - Black | Switch 1 | $131.00 |
| Egg Switch - Blue | Switch 1 | $131.00 |
| Egg Switch - Green | Switch 1 | $131.00 |
| Egg Switch - Red | Switch 1 | $131.00 |
| Egg Switch - Yellow | Switch 1 | $131.00 |
| MicroLite (Includes colour labels) | Switch 1 | $195.00 |
| Mini Button 1 - Blue (Velcro) | Switch 1 | $125.00 |
| Mini Button 1 - Green (Velcro) | Switch 1 | $125.00 |
| Mini Button 1 - Red (Velcro) | Switch 1 | $125.00 |
| 1" Single Switch - Black | Switch 1 | $326.00 |
| 1" Single Switch - Blue | Switch 1 | $326.00 |
| 1" Single Switch - Green | Switch 1 | $326.00 |
| 1" Single Switch - Orange | Switch 1 | $326.00 |
| 1" Single Switch - Red | Switch 1 | $326.00 |
| 1" Single Switch - Yellow | Switch 1 | $326.00 |
Electronic Switches |
||
| Flex Switch (Headrest mount only) | $254.000 | |
ProSpot - Proportional Switches |
||
| ProSpot Proportional Switch - Red | $562.00 | |
| ProSpot Proportional Switch - Green | $562.00 | |
| ProSpot Proportional Switch - Blue | $562.00 | |
| ProSpot Proportional Switch - Yellow | $562.00 | |
| ProSpot Proportional Switch - Orange | $562.00 | |
Section B - Switch Mounting Position |
||
| Link-It to the Backrest (Up to 1 per side) | $770.00 | |
| Link-It to the Headrest - Gooseneck & Rigid (Up to 2 per side) | $770.00 | |
| Link-It to the Fixed Joystick Mount (Up to 2 per side) | $587.00 | |
| Link-It to the Parallel Swing-Away Joystick Mount (Up to 2 per side) | $587.00 | |
| Link-It to the Seat Rail (Up to 2 per side) (Not avail w/knee & thigh supports) | $467.00 | |
| Omit Mount (includes Velcro) | NC | |
Section C - Switch Mounting Location |
||
| Right side of chair | NC | |
| Left side of chair | NC | |
Joystick Integrated Switches (Pair) |
||
| 250JO03 | Proximity Switches on Flex Mount, Pair (Used with VersaGuide/VersaGuide EZ) | $1,178.00 |
JAY® Syncra™ Seating Measuring Guide
JAY® Syncra™ Back
| Backrest Width | 16" | 18" | 20" | 22" |
|---|---|---|---|---|
| Max User Trunk Width | 13.5" | 15.5" | 17.5" | 19.5" |
JAY® Swing-Away Lateral Thoracic Adjustment Range
| Syncra Back Width | Width Range | Height range from bottom of shell to seat pan |
|---|---|---|
| 16" | 10" to 24" | 12" to 19.5" |
| 18" | 12" to 26" | 12.5" to 21.5" |
| 20" | 14" to 28" | 12.5" to 22" |
| 22" | 16" to 30" | 13.5" to 23" |
JAY® Lateral Thigh Support Adjustment Range
| Syncra Cushion Width | Width Range |
|---|---|
| 16" | 8.5" to 16.0" |
| 17" | 9.5" to 17.0" |
| 18" | 10.5" to 18.0" |
| 19" | 11.5" to 19.0" |
| 20" | 12.5" to 20.0" |
| 22" | 14.5" to 22.0" |
Syncra™ Fixed Lateral Support Accessory Range
| Syncra Back Width | Width Range | Height range from bottom of shell to seat pan | Contour Depth Range |
|---|---|---|---|
| 16" | 16.4" to 16.8" | 6" to 8" | 3" to 5" |
| 18" | 18.4" to 18.8" | 6" to 8" | 3" to 5" |
| 20" | 20.4" to 20.8" | 6" to 8" | 3" to 5" |
| 22" | 22.4" to 22.8" | 6" to 8" | 3" to 5" |
Syncra™ Back Shell Height Diagram
A diagram shows the backrest shell of the JAY® Syncra™ system, indicating dimensions like 'BACK HEIGHT (inches)' and a width measurement of 3.5 inches.
JAY® Syncra™ Cushion
An image displays a JAY® Syncra™ cushion.
Order Summary
| Base Price | $ |
| Total of additional equipment | $ |
| Packaging and transport | $ |
| Total Price | $ |
Signature:
