USER MANUAL

Welcome

Thank you for purchasing our product. Your support and suggestions are the driving force for our improvement. Please feel free to contact us if you have any questions. We are committed to providing you with good service.

Product Overview

A portable K26 karaoke machine with colorful LED lighting. Two wireless microphones are shown docked on top, and a smartphone is mounted in a holder above the speaker.

Dimensions: Approximately 130 mm (height) x 80 mm (width) for the manual pages.

Products Feature

• Bluetooth version: 5.4
• Transmission distance: 40-50 ft
• Playing hour: 4-8 hours
• Frequency: 20 Hz - 20 kHz
• Charging: DC/5V, Charging current ≤ 1000 mAh
• Speaker model: K26
• Battery specifications: Speaker battery 2400 mAh with protection, Microphone battery 300 mAh with protection.

Packing List

• Karaoke Machine * 1
• Wireless Mic * 2
• Type-C charging cable * 2
• User Manual * 1

Speaker Button Functions

Diagram of speaker control buttons and connection ports. Buttons include 'M', '+', '-', '?/▶️', '?/?'. Ports are labeled TF, AUX, USB, DC 5V.

• M / ?/?: Short press: Switch lighting effects; Long press: Turn on/off the light. (?)
• +: Short press: Increase speaker volume; Long press: Switch to the previous song. (➕ / ⏮️)
• -: Short press: Reduce speaker volume; Long press: Switch to the next song. (➖ / ⏭️)
• ?/▶️: Short press: Play/pause; Long press: Power on/off. (? / ▶️ / ?)

Microphone Button Functions

Diagram of microphone control buttons. Buttons include '?/▶️', '+', '-', '?/?'.

• ?/▶️: Long press: Turn on/off the microphone; Short press: Play/pause. (? / ▶️ / ?)
• +: Long press: Play the previous song; Short press: Increase the microphone volume. (⏮️ / ➕)
• -: Long press: Play the next song; Short press: Decrease the microphone volume. (⏭️ / ➖)
• ?/?: Long press: Eliminate the original sound; Short press: Switch between 5 sound effects. (? / ? / ?)

Speaker Specifications

• Size: 78 mm
• Material: Hardware
• Impedance: 4 Ω
• Sensitivity: 92 dB/w/m
• Standard power: 1 * 10W
• Maximum power: 1 * 10W
• Frequency range: 20 Hz - 20 kHz

Connection Ports

• AUX: Requires a 3.5mm audio cable to connect devices like mobile phones or MP3 players.
• TF: Slot for inserting a TF card to play MP3 or WAV files.
• USB: Slot for inserting a USB disk to play MP3 or WAV files.
• DC 5V: Use the included Type-C charging cable and a 5V/1A charger (not included). The indicator light above the port is red during charging and turns off when fully charged. (⚡)

Display Situation of Karaoke Speaker

• Speaker not paired: Bluetooth indicator flashes quickly (? ---).
• Speaker waiting to be paired: Bluetooth indicator flashes quickly (? ---).
• Pairing successful: Bluetooth indicator light is always on (? ---).
• Speaker charging state: Red light is always on (?).
• Charging completed: Red light goes out (⚪).
• Low battery alarm: Voice prompt for low battery.

Cautions

• Fast charging is not supported; please use a 5V/1A charger (not included).
• After receiving the product, please charge it for 2-3 hours before use.
• To avoid strident noise, please do not put the microphone too close to the speaker during use.
• If you have any questions, please go to your order and click "Contact Seller"; we will do our best to help you.

Customer Service

We provide 24-hour customer service. If you have any questions or problems with this product, you can contact us at any time by sending an email.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.