Pioneer SE-S6BN Headphones
Model: SE-S6BN
About This Guide
Thank you for choosing Pioneer. This guide provides essential information for the quick setup and basic operation of your SE-S6BN headphones.
Parts Name
Diagram showing the components of the Pioneer SE-S6BN headphones. Labeled parts include the headband, left earcup, right earcup, and the audio cable connector.
- 1. Headband
- 2. Left earcup
- 3. Right earcup
- 4. Audio cable connector
- 5. Ear pads (replaceable)
- 6. USB charging cable
- 7. Audio cable
Attaching the Ear Pads
Illustration demonstrating how to attach the ear pads to the earcups of the Pioneer SE-S6BN headphones. It shows the ear pad being placed over the earcup and secured.
Align the ear pad with the earcup and gently press around the edge to secure it in place.
Connecting the Cable
Illustration showing how to connect the audio cable to the headphones. The cable has a 3.5mm jack on one end and connects to the designated port on the headphone earcup.
Insert one end of the audio cable into the audio cable connector on the headphones and the other end into the audio output device.
How to Use
Power On/Off
Press and hold the power button [▶️] for a few seconds to turn the headphones on or off.
Bluetooth Pairing
When powered on for the first time, the headphones will automatically enter pairing mode. On your Bluetooth device, search for 'Pioneer SE-S6BN' and select it to pair.
If already paired, press and hold the power button [▶️] until the indicator light flashes blue and red to enter pairing mode.
Playback Control
Use the playback buttons [▶️ / ||] to play, pause, skip tracks, and adjust volume.
Charging
Connect the USB charging cable to the headphones and a USB power source. The indicator light will show the charging status.
Troubleshooting
- No sound: Check if the headphones are powered on, connected via Bluetooth or cable, and volume is up.
- Cannot pair: Ensure Bluetooth is enabled on your device and the headphones are in pairing mode. Try restarting both devices.
- Poor sound quality: Check Bluetooth connection strength or cable integrity.
Precautions
- Do not expose to water or moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble or repair the headphones yourself.
- Listen at moderate volumes to prevent hearing damage.
Warranty Information
Refer to the separate warranty card for details on warranty coverage.
Contact Information
For support, please visit the Pioneer website or contact your local Pioneer distributor.