User Guide for ELMAG models including: VS 350 PL Metal Circular Saw, VS 350 PL, Metal Circular Saw, Circular Saw, Saw
Elmag VS 350-PL Metal Circular Saw — Tool Bay Direct For comprehensive details on setup, operation, and maintenance, please refer to the
METAL CIRCULAR SAW VS 350 PL, 18/36 rpm 'pneumatic Article Number: 78071 EAN Code: 9004853780714 TECHNICAL FACTS VS 350 PL Semi-automatic pneumatic system with quick-release and transmission head cylinder Angle stops at 45-0-45-60° Cutting range max. 170x100 mm Material support with two rollers Slow speed and high torque for INOX/NIRO/stainless steel and hard materials. PRODUCT HIGHLIGHTS VS models Modern, semi-automatic vertical circular saws with pneumatic or hydraulic quick-release vice, automatic feed and cutting pressure control. Semi-automatic cutting cycle with high throughput. > Cutting depth adjustable with nubs > Quick angle adjustment: swivel gear head with angle scale and locks > Double-sided clamping - quick-action vice with anti-burr workpiece holder > High performance: high-performance motor with two speed settings for hard/soft materials > Smooth-running and durable: Quality gear unit with oil bath for permanent lubrication 04.04.2024 - 1/3 COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORS METAL CIRCULAR SAW > Feed can be optimised at any time: with infinitely adjustable cutting pressure control > Optimal saw blade guide: Cooling system with electric pump, dosing valve and return filter > Chip clearer for saw blade cleaning > Highest repeatability: bar lock with adjustable material stop > Safe: saw blade protection/guard, emergency stop, zero-voltage release, CE-compliant Standard features - VS metal circular saw - H-Auto P pneumatics, semi-automatic - Chip remover saw blade cleaning - Material support with two rollers - Bar lock with material stop - GKS swivel gear head - Angle scale and angle locks - Vertical stroke/cutting depth adjustable - SSS quick-action vice - Anti-burr workpiece holder - SSP quick-release pneumatic clamp - High performance drive/oil bath transmission - Central operating panel - SDS cutting pressure control - Cooling system with electric pump - Fixed protective grille - Emergency stop/zero voltage release - Steel plate base and chip tray - Tools/Operating instructions/CE Semi-automatic cutting cycle - Cycle start from operating panel - Fix material/close clamp - Saw blade drive on - Lower gear head/cut - Saw blade drive off - Raise/reset gear head - Release workpiece/open clamp SPECIFICATIONS 04.04.2024 - 2/3 COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORS METAL CIRCULAR SAW round tube cutting range at 0° round tube cutting range at 45° right winged mitre round tube cutting range at 60° right winged mitre square tube cutting range at 0° square tube cutting range at 45° right winged mitre square tube cutting range at 60° right winged mitre rectangle tube cutting range at 0° rectangle tube cutting range at 45° right winged mitre rectangle tube cutting range at 60° right winged mitre sawblade outside diameter sawblade inside diameter vise span max. Cutting angle speed level 1 / 2 engine power speed level 1 / 2 voltage infeed height for runways Length Width Height Weight Max. 120 mm Max. 120 mm Max. 90 mm Max. 100 mm Max. 90 mm Max. 90 mm Max. 170x90 mm Max. 125x90 mm Max. 90x90 mm 350 mm 32 mm 185 mm 45-0-60 ° 18 / 36 rpm 1500 / 2200 W 400/50 V/Hz 908 mm 2640 mm 1200 mm 1850 mm 500 kg 04.04.2024 - 3/3 COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORSdompdf 2.0.3 CPDF