User Manual for bcs models including: 524B, 524B WPC Wireless Charger, WPC Wireless Charger, Wireless Charger, Charger
BCS Automotive Interface Solutions (Suzhou) Co., Ltd 524B525AWPC 2AXPS524B525AWPC 2AXPS524B525AWPC 524b525awpc
Wireless Charger- WPC User Manual This wireless charger can charge your Qi-enabled smartphone. Just simply place your smartphone on the rubber mat above the wireless charger. The wireless charger supports up to 15W power delivery. NOTE: The wireless charger may not work if your phone case is metal. Take the phone out of the case and place the phone on the charger. After the user starts the vehicle, the power supply of the product will be connected, wait for the charging indicator of the product to be charged to light up, indicating that the product works successfully. EU Declaration of Conformity Hereby, BCS Automotive Interface SolutionsSuzhouCo., Ltd., BCS Automotive Interface Solutions s.r.o declare that the radio equipment Wireless Charger Inductive Charger, is in compliance with Directive 2014/53/EU. Radiation Exposure Statement: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Product name: WPC Model No.: 524B/525A WPC Operator Frequency: WPT:127.77kHz±1% NFC:13.56MHz Max. Output: 15W Input: 12V DC, 2A Operating Temperature: -40~ 85 Storage Temperature: -40~ 95 Maximum radio power: WPT(H-Field): 5 dBA/m@10M NFC(H-Field): 1 dBA/m@10M Manufacturer: BCS Automotive Interface SolutionsSuzhouCo., Ltd. AddressNo. 2052, Taidong RoadXiangcheng Economic Development District Suzhou, Jiangsu Province, 215143 China Factory 1BCS Automotive Interface Solutions (Suzhou) Co., Ltd. No. 2052, Taidong RoadXiangcheng Economic Development District Suzhou, Jiangsu Province, 215143 China 2BCS Automotive Interface Solutions s.r.o. Jana Nohy 2048CZ-256 01 BenesovCzech Republic EU Importer. Name: XXXXXX Address XXXXXX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)L'appareil ne doit pas produire de brouillage; (2)L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with radio frequency exposure limits set forth by the Innovation, Science and Economic Development Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d'exposition aux radiofréquences définies par la Innovation, Sciences et Développement économique Canada pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre le dispositif et l'utilisateur ou des tiers. Ce dispositif ne doit pas être utilisé à proximité d'une autre antenne ou d'un autre émetteur. CAN ICES-3 (B)/NMB-3(B)Microsoft Word for Microsoft 365