Televes AVANT 12 Programmable Head-End Amplifier

Key Features

• 4 programmable VHF+UHF inputs with up to 32 filters.
• Automatic/programmable power supply and LTE 5G filtering.
• Short-circuit protection.
• Input 4 can be programmed as DAB input (channels 5-12).
• High selectivity filters for adjacent channel balancing with individual AGC.
• Programmable for any VHF (5-12) or UHF (21-48) channel.
• Channels can be converted to different output channels (VHF/UHF up to channel 69).
• Automatic channel balancing based on programmed output level and equalization slope.
• FM and VHF/DAB output levels adjusted according to programmed UHF output level.
• Programmable gain and slope satellite input.
• LNB power configurable locally (13-17V / 0-22kHz), remote, or dCSS (SAT models only).
• Easy programming via Android/iOS Smartphone with Bluetooth (BLE).
• PRO and PRO-SAT versions offer DVB-T/T2 channel discrimination, real-time quality monitoring, and installation report generation.

Safety and Installation Instructions

General Safety:

• Read all instructions before handling or connecting the equipment.
• Keep these instructions for future reference.
• Heed all warnings and follow all instructions.
• Clean only with a dry cloth.
• Do not use the apparatus near water or expose it to dripping or splashing.
• Do not block ventilation openings; ensure adequate air circulation.
• Do not place the equipment in high humidity environments or near heat sources.
• Do not place naked flames (e.g., lighted candles) on or near the product.
• Avoid placing the equipment in locations subject to strong vibrations or shocks.
• Use only manufacturer-specified attachments/accessories.

Electrical Safety:

• Ambient temperature should not exceed 45°C.
• Power requirements: 110-230V~50/60 Hz (Refs. 532202, 532204) or 220-230V~50/60 Hz (Refs. 532201, 532203).
• Connect to the mains supply only after all other connections are completed.
• Ensure the socket outlet is near and easily accessible.
• To disconnect, pull the plug, never the cable.
• Protect the power cord from being walked on or pinched.
• Unplug during lightning storms or when unused for long periods.
• Refer all servicing to qualified personnel.

Warnings:

• To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.
• Do not remove the equipment cover without first disconnecting it from the mains supply.
• This apparatus must be securely attached to the floor/wall in accordance with installation instructions. Do not connect to the mains supply until it is securely attached.

Connections and Controls

• POWER: For power connection (220-230V~ or 110-230V~).
• LED: Indicates power status (ON/ADJUSTING).
• ADJUST: Initiates the adjustment process.
• READJUST: Restarts the adjustment process with previously stored configuration.
• GROUND CONNECTION: For earthing the unit.
• Inputs: VHF+UHF 1, 2, 3, 4/DAB, FM, SAT.
• Outputs: TV, TV+SAT.
• TEST-30dB: Test point for signal measurement.

LED Indications

• ADJUST LED: Blinking indicates adjustment in progress; solid ON indicates correct adjustment.
• POWER LED: Indicates the unit is powered on.

Configuration and Adjustment

• Use the ASuite application (Android/iOS) to select parameters and send the configuration to the unit via Bluetooth.
• Press the ADJUST button to start the adjustment process.
• The READJUST button can be used to restart the adjustment with the previously saved configuration.
• Inputs and outputs must be terminated for correct unit adjustment.

Technical Specifications

Applications

The AVANT 12 series amplifiers are designed for processing and amplifying individual terrestrial TV channels, ensuring perfect level balancing between them. They can be used in installations with more than 30 outlets, provided they meet the level difference requirements specified by regulations.

Diagrams illustrate various installation scenarios, including connection to antennas, distribution networks, and configuration using the ASuite application via Bluetooth.

Compliance and Software

• The product complies with CE mark requirements.
• The equipment is designed for indoor use.
• The unit meets safety requirements for Class II equipment with functional earthing.
• License agreement and third-party software declaration are available at https://doc.televes.com.
• Declaration of Conformity is also available at https://doc.televes.com.