TJW Secure Smart Security Lock Box Instruction

APP download

Please search for ImLockbox in the Android App Store or App Store or scan the QR code below, download and install it, and log in to enter the homepage of App.

[QR Code Image: ImLockbox App Download for Android & iOS]

Item list

Thank you very much for purchasing our company's products. We will provide 1*key lock box, 2*expansion screws, 1*operation instruction.

Know our locks

Diagram: A lock with labeled parts:

• a Removable shackle
• b LED display
• c Charging display lamp
• d Reset button
• e USB charging port
• f The keypad
• g Intelligent lockbox

[Image: ImLockbox with labeled parts a-g]

[Image: ImLockbox with cable]

Intelligent lockbox

Diagram: Internal view of the intelligent lockbox:

• Screw
• Battery compartment
• Storage space

Battery compartment: This product uses a rechargeable 18650 battery (one or two batteries can supply normal power to the lockbox). You can unscrew the fixing screw to replace the battery. Please pay attention to the direction of installation when replacing, to prevent short circuit from burning out the product.

Storage space: Do not store inflammable, explosive and other dangerous and prohibited articles. Do not store any creature inside. The space is airtight and will cause suffocation.

Function explanation

Removable shackle: [Image: Shackle removal illustration]

WARNING: Please note that the lock body falls and hits the foot.

*15s fixed waiting time when you plug in the shackle again.

LED display:

• Display Format: MM/dd HH:mm:ss
• WELCOME: Wake up the lock
• LOW BATTERY: Need to recharge
• SUCCESS: Password is right
• WRONG: Password mistake

*After successful binding, the display time will be corrected by the system.

Reset button: [Image: Reset button illustration showing left and right]

If the time display is incorrect and the lockbox cannot be opened normally, please use "reset" to restart.

Charging display lamp:

• Red light: Charging
• Green light: Charge Completed

USB charging port:

• Charging voltage: DC 5V
• Use a commercially available standard USB AC adapter with a power supply of 1.5A or 0.5A.

User's guide

1. Search your equipment

Activate the lockbox: Please click any button on the lock to activate the lock screen (* if the screen does not light up normally, please reset to restart or charge to activate).

Add a new lock: Click "+" or "Add a new lock" in the APP to enter the Bluetooth lockbox device search page. (Please keep the lockbox screen on)

[Image: Hand interacting with phone app showing 'My Lockbox' and 'Add a new lock' options]

[Image: Close-up of the ImLockbox keypad]

The entity lock

The app page

2. Bind your 'ImLockbox'

Bind the searched lockbox

In the search results, click "bind" the selected lockbox will pop off the lid.

If it cannot be bound, make sure that the lockbox has been bound by someone else. Locks that have been bound cannot be bound twice.

[Image: App screen showing 'ImLockbox' and 'bind' button]

The app page

[Image: Close-up of the ImLockbox keypad]

The entity lock

Named the lockbox

Scan the QRCode on the back of the corresponding lockbox and rename your lockbox to successfully bind. (* the QRCode and product number on the back are subject to the entity lock)

[Image: Back of entity lock showing QR Code and product number WLB01BAAA000]

[Image: App screen showing 'Binding success', 'id:WLB01BAAA000', 'Named the lock', 'Edit Name', 'Remarks']

Named the lock

3. Use your equipment

About how to unlock

Lock shackle: Only the owner of the lock can open the lock shackle, lock shackle box is completely separated, please be careful when the lock shackle fall, it could be hit your foot.

Lockbox opening: All the authorized persons can open the lockbox, the authorized person and the authorized time can be set, please be careful to authorize.

We are not responsible for any loss caused by improper operation.

[Image: App screen showing lock details, history, and authorization options]

The entity lock

The app page

About the authorization

You can flexibly set the opening time of the authorized person in the application, and you can manage to delete the authorization. When the authorization is turned off or not within the authorization time, the authorized person will not be able to open the lockbox.

Click to enter the authorized person's detailed page, you can manage the opening time.

Swipe left to remove this authorization.

[Image: App screen showing authorization details, including adding an authorized person with time settings]

The app page

The entity lock

The app page