U1020013 Assembly Instructions
Product Model: U1020013
Brand: Signature Design by Ashley
Important Safety Notices
Please read the following safety notices carefully before beginning assembly. These notices are provided in English, Spanish, French, and Chinese.
English Safety Guidelines:
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products with electric cords (lamps, lights, etc.), always ensure (1) the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as tables are not designed to support the weight of a person.
- Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Disclaimer: Ashley Furniture Industries, LLC. disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Assembly Overview and Parts
General Assembly Note: The unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.
Parts Included:
- Ax1
- Bx1
- Cx1 (Not Included)
- Dx1 (Not Included)
The diagrams illustrate the main furniture unit and the connection points for the included parts. Parts Cx1 and Dx1 are not supplied with the unit.
Assembly Steps
Follow these steps to assemble your furniture.
Step 2: Attaching Components
This step involves attaching various components to the main furniture body, identified by labels A, B, C, and D. Arrows indicate specific connection points. For instance, label B points to the top section of the unit. An inset shows a bolt being inserted and tightened using a tool [tool icon]. Another inset shows a connector labeled C being attached to a corresponding port.
Step 3: Connecting the Back
This step focuses on the rear of the furniture unit. An arrow indicates a connection point on the back, with an inset showing a bolt being inserted and tightened. Another inset illustrates a cable connection.
Step 4: Final Assembly
This step shows the fully assembled furniture unit from the front view.
Replacement Parts and Support
For replacement parts or support, please contact Ashley Furniture:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809