LED Under Cabinet Light

Product Details

Model: VBUN-R25-12V

Input: 12V DC 2.5W

Usage and Installation

For cabinet use only.

Use only with a Class 2 power unit.

? Attention: This product must be installed by a certified electrician.

Important Safety Instructions

Veroboard luminaires (fixtures) are designed to meet the latest NEC requirements. This product is UL/CSA listed and is in full compliance with the UL approvals. Before attempting installation, check your local electrical code. This code sets the wiring standards for your locality and should be carefully studied before starting.

Warnings

• WARNING: Risk of fire or electric shock.
• WARNING: To prevent wiring damage or abrasion, do not expose wiring to the edges of the sheet metal or any other sharp object.
• WARNING: Do not use the LED wire inside drywalls. The wiring is for dry location use only.

Caution

• CAUTION: To reduce the risk of fire, do not install in a compartment smaller than 12"x12"x12".
• (French translation: Pour réduire le risque d'incendie, ne pas installer dans un compartiment de moins de 12"x12"x12")

Diagram Descriptions and Specifications

Installation Diagram 1: Wiring Connection

This diagram illustrates the DC12V input connection to a ceiling structure. It shows positive (+) and negative (-) terminals for wiring. A minimum clearance of 8 mm (0.315 inches) is indicated around the fixture area.

Installation Diagram 2: Fixture Mounting

This diagram shows the LED luminaire being installed into a cabinet cutout. The DC12V input connection is visible. The fixture is designed to fit into a hole with a diameter of 54 mm (2.1/8 inches).

Certifications

Conforms to UL STD 2108

Certified to CSA STD C22.2#250.2

UL Listed

Intertek Certified (File No. 5018798)

Model Number: VB-1001