iKOVUK B1-12 Laser Level User Manual
Content
Safety Notes Before Use
Please read this manual carefully before using the laser level and keep this manual for reference.
- Caution - Using unmentioned operating or adjusting equipment can lead to dangerous radiation exposure.
- While the laser level is in operation, be careful not to expose your eyes to the emitting laser beam.
- Do not stare directly into the laser beam or view directly with optical instruments or set up the laser at eye level.
- Do not allow children to use the laser level without supervision. They could unintentionally blind other people or themselves.
- Have the laser level repaired through qualified specialists using original spare parts. Do not make any modifications to the laser level.
- Do not operate the laser level in an explosive environment, such as in presence of flammable liquids, gases, or dust. Sparks can be created in the laser level which may ignite the dust or fumes.
- Protect the laser level against moisture and direct sunlight.
- Do not subject the laser level to extreme temperatures or variations in temperature. In case of large variations in temperature, allow the laser level to adjust to ambient temperature before putting it into operation.
- It is normal for the laser level to have some reflected light when it is used on reflective surfaces such as glass or tiles.
- Do not dismantle, open or shred battery pack. Remove the battery pack from the device when not using the laser level for an extended period of time.
- Recharge only with the charger specified by iKOVUK. Do not use any charger other than that specifically provided for use with the equipment.
- Avoid heavy impact to or falling down of the laser level.
- Turn off the laser level during transport or extended periods of storage.
Product Overview
Laser Level
The laser level features the following components:
- Horizontal Laser Window
- Front Vertical Laser Window
- Side Vertical Laser Window
- Control Panel
- Charging Port
- ON/OFF Switch
- Battery Compartment Cover
- 1/4" Thread Mount
- 5200 mAh Battery
The control panel includes buttons for Horizontal Line (H), Vertical Line (V), and a combined function button (often labeled with a sun/moon or similar icon) for Manual Mode/Pulse Mode and Brightness Adjustment.
Attention: The button with the sun/moon icon has multiple functions. Please refer to the 'Operating Modes' section for specific operation methods.
Remote Control
The remote control allows for wireless operation of the laser level. It includes:
- Button Indicator light
- Horizontal Laser Line button (H)
- Vertical Laser Line button (V)
- 23A 12V Battery (Included)
Attention: The indicator light flashes blue when a button is pressed. The remote control comes with a 23A 12V battery. If the battery power is exhausted, the indicator light will not illuminate when a button is pressed. Ensure you use the correct replacement battery for proper functionality.
L-shape Bracket
The L-shaped bracket is magnetic and can be attached to any solid metal surface. A metal plate is included, which can be fixed to non-magnetic surfaces using screws or nails.
Charger
The charger is used to recharge the laser level's battery. It features a charging indicator:
- Red light: Charging
- Green light: Fully Charged
Recharge is not recommended for more than 24 hours after each use. Charge and discharge the battery periodically to extend its service life, especially when not in use for extended periods.
Package List
| Item | Quantity |
|---|---|
| 12 Lines Laser Level | 1 |
| 5200 mAh Battery | 1 |
| Battery Charger | 1 |
| Remote Control (included a 23A 12V battery) | 1 |
| Magnetic L-Shaped Bracket | 1 |
| Laser Target Board | 1 |
| Metal Plate | 1 |
| Portable Storage Bag | 1 |
| User Manual | 1 |
| Warranty Card | 1 |
Operating Modes
Self-leveling Mode
- Slide the Switch to the ON position (indicated by 'ON' or a similar symbol) to turn on Self-leveling Mode.
- The laser level will emit 1 horizontal beam and 2 vertical beams with an automatic leveling range of ±3°. If the device is outside this range, it will emit an alarm sound and the laser beams/level indicator will flash.
- Once self-leveling is complete, the alarm will stop, the laser beams will stop flashing, and the level indicator will glow green. Press the 'H' or 'V' buttons to control the laser beams.
- Slide the Switch to the OFF position (indicated by 'OFF' or a similar symbol) to turn off Self-leveling Mode.
Manual Mode
- Keep the Switch in the OFF position. Press and hold the combined function button (often with a sun/moon icon) for 3 seconds to turn on Manual Mode.
- In Manual Mode, the laser level will not self-level. The level indicator will flash continuously. The laser tool can be held by hand or placed on an inclined surface to project a laser beam in any orientation.
- Press and hold the combined function button for 3 seconds to turn off Manual Mode.
NOTE: In Manual Mode, the laser beam cannot be used as a horizontal or vertical reference.
Pulse Mode - Working with Detectors (not included)
- With the laser level powered on, short press the combined function button (often with a sun/moon icon) to activate Pulse Mode. This mode is used to work with detectors for a longer working distance.
- The laser beam is weaker in Pulse Mode. The laser level is compatible with most detectors.
Brightness Adjustment
- The combined function button (often with a sun/moon icon) can also be used to adjust the laser brightness according to the use environment.
Maintenance
- Maintain the laser level clean after use.
- Regularly clean the surface of the laser windows, and check for any fluff or fiber attached to them.
- Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.
- Do not immerse the laser level in water or other fluids.
- Store and transport the laser level only in the supplied portable storage bag.
- If the laser level is unusable, do not attempt to open it yourself. Please contact the iKOVUK support team.
Specification
| Parameter | Value |
|---|---|
| Nominal voltage | 3.7V |
| Leveling accuracy | ±1/8 inch at 33 feet |
| Wave length (nm) | 520nm |
| Automatic leveling range | ±3° |
| Working time | 6.5 hours (12 lines fully bright) |
| Laser type | LD green/12-Line |
| Working range | Radius 32.8 feet (indoor) |
| Laser class | CLASS II, <1mW |
| Operating temperature | -10°C-45°C |
| Storage temperature | -10°C-45°C |
| Protection class | Class III |
| Battery capacity | Li-ion 3.7V 5200mAh |
| Protection class for charger | II |
| Charger input | 100-240V~50/60Hz, 0.2A |
| Charger output | 5 V ⎓ 1.5A |
| Charging time | 3 hours |
| Weight | 1.05 lbs |
18 Months Warranty
iKOVUK is confident in its products and offers excellent and professional service to its customers. This statement is in addition to your effective rights and does not injure your statutory rights.
If there is a machine failure, iKOVUK will provide a replacement service within 18 months from the date of purchase. Please provide:
- The order ID.
- Video or pictures of the machine failure.
Attention: This warranty does not cover damage caused by human factors, accident, misuse of the product, unauthorized alteration to or change of parts or components of the product, or problems of power supply.
Questions or Suggestions?
Email: support@ikovwuk.com
Dear valued customers,
Thank you for choosing iKOVUK. To ensure you get the most out of your purchase, we have provided information on how to access the product manual and an introduction video. Accessing these resources can help you learn how to set up and use the product intuitively and quickly.
If you encounter any issues with the product, please contact the iKOVUK support team at support@ikovwuk.com. Our dedicated team will respond to your queries within 24 hours and work tirelessly to resolve the issue as quickly as possible.
Thank you for choosing iKOVUK. We welcome any feedback you may have.
Best regards,
—The iKOVUK team