TV Radio Broadcasting Equipment - DB Broadcast
User Manual for VIZTRAC models including: TC801W, TC801, MC, TC801W Wireless Sewer Pipe Inspection Camera, TC801W, Wireless Sewer Pipe Inspection Camera, Pipe Inspection Camera, Inspection Camera, Camera
Jan 28, 2024 · Wireless Smart Inspection Camera Specifications. Sensor Type. 1/3" CMOS. Image Resolution. 720p (1280 x 720). Lens manual focus. Viewing angle.
File Info : application/pdf, 18 Pages, 16.80MB
DocumentDocumentViztrac MC User Manual Wireless Sewer Pipe Inspection Camera RERST 0.00m SmartCam WiFi Reminder Please read this user manual carefully before using the product. 1 Table of Contents 1. Product Instruction........................................................................ ..3 2.App Installation................................................................................4 3. Connect To Your SmartCam Camera..................................................4 4. SmartCam WiFi App Introduction.......................................................5 5.Packing List.....................................................................................13 6.Specifications..................................................................................14 7 . FA Q S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 8.FCC STATEMENT...............................................................................16 2 1.Product Instruction Rechargeable Charging Time 4hours fast charge Operating Time: approx 9hours (LEDs full) to 11hours Battery Capacity: 10000mAh 12 Adjustable bright white LEDs: control functionality via the app (off, 25%, half, full) App controlled variable focus lens MF Manual focus Safe working in hard-to-reach places Record video with sound Record video with sound Always up viewing mode (either Round or Full Screen) Built tough Weight: 15.7 lbs Size:19.7"X15"X5.2" Unscrew Multiple smart devices can connect to the camera at the same time Built-in meter counter Automatic wire locking mechanism Wireless range up to 65 feet (In line of sight) Built-in wifi hotspot Waterproofing gradeIP67, it is dustproof and waterproof. 2.4GHz WiFi Digital pinch zoom: Easier fault finding Pinch Zoom It has a USB output port to charge the phone 720P HD Viewing angle: Horizontal:88°, Vertical:48° screw white led Lens screw Output port Unscrew Charge Port Green light when in use Power button Green light blinks when it's charging Green light when it's fully charged Unscrew Pulley bloc institution screw Glass fiber outlet Host machine Glass fiber Toolbox Camera Wireframe Shoulder strap buckle Bracket 3 handle Unscrew screw 2.App Installation Download The Smartcam WiFi App:By searching for SmartCam WiFi in the Google Play or Apple APP Store. Requires IOS V11.2 or later Requires Android V6.0 or later SmartCam WiFi Note: On first use you need to give the App access to the gallery of photos and videos on your device to be able to allow you to save photos and videos. 3. Connect To Your SmartCam Camera. 3.1 Press the power switch button to turn on the power. Note: When starting up, you need to press the power switch button for 3 seconds, the power indicator on the left side will first show green for about 5 seconds, and then off, after about 3 seconds, the power indicator on the left side will show green on, which means that the product is working normally. Power button Note: Ensure the camera is charged. 3.2 Click on the SmartCam WiFi icon'' power Led Charging Led ",the following dialog box is displayed. Camera not connected Please connect to your SmartCam WiFi in your Settings. Cancel OK 3.3 Click on "ok"the following dialog box is displayed. Settings WLAN WLAN 666 i MY NETWORKS 888 i SmartCam-xxxxxx i OTHER NETWORKS Aaa i Bbb i Other.... 3.4 Search for a wireless name "Smartcam-xxxxxx" in the wireless listing and click to select it.(No other WiFi network is needed) 3.5 Return to the APP home screen to watch the video. RERST 0.00m 4 4.SmartCam wiFi App Introduction 4.1 SmartCam WiFi App home page function button introduction Display Time Meter counter display data Settings Light Full 2024-01-28 16:18:18 RERST 0.00m OSD Adjust the brightness slider The meter counter starts counting again Battery Level Indicator MF Manual focus Adjust lens focal length slider Light Off Record Record Photos Videos Gallery Help Picture still Brightness Light full Adjust the brightness of the six white lights by moving the circular icon " " on the left up and down. The lights are brightest when the circular icon is moved to the top and off when the circular icon is moved to the bottom. The six white lights can also be controlled by 25 percent or half of their brightness when the circular icon is moved from bottom to top or from top to bottom. Light off Record photos Click on the Camera icon to take a photo. Photos are saved on Phone by default. Record videos Click on the Video icon to take a video. Videos are saved on Phone by default. Gallery Click on the "Gallery" icon to access all pictures and videos taken with smartCam. click on the Gallery icon " "and the following interface will pop up: Device Gallery If you want to delete all the photos and videos stored on Phone through the smartcam wifi, click the Delete icon " " in the upper right corner of the interface. A dialog box will pop up asking you to confirm whether you want to delete them. Gallery Are you sure to delete all record files? Cancel OK If you're sure you want to delete all the photos and videos, click the OK button. If you don't want to delete them, click the Cancel button. Note: If there are no photos or videos taken through the smartcam wifi in the Gallery, the delete icon " " will not be displayed. 5 View photos Click on the photo file icon " "and the following interface will pop up: You want to see that photo, just click on the photo above, and it pops up. Delete photo If you delete a photo, do the following: 1. Click the Delete icon " "in the upper right corner of the screen above. 2. In the upper right corner of each video, a blue circle with a gray icon inside will be displayed, as shown in the screen above. Cancel OK 3. Click on the blue circle in the top right corner of the photo you want to delete. The circle will turn blue and a white will pop up inside it. See the screen above. 4. If you're sure you want to delete the photo, click the OK button. If you don't want to delete the photo, click the Cancel button. Click the Delete icon in the upper right corner of the interface again, and a dialog box will pop up asking whether you want to delete or not. View videos Gallery Click on the video file icon " "and the following interface will pop up: Directly tap the video file you are watching in the above screen, and the video will pop up and play automatically. 6 Delete videos If you want to delete the video, do the following: 1. Click the Delete icon " "in the upper right corner of the screen above. 2. In the upper right corner of each video, a blue circle with a gray icon inside will be displayed, as shown in the screen above. Cancel OK Help 3. Click on the blue circle in the top right corner of the video you want to delete. The circle will turn blue and a white will pop up inside it. See the screen above. Click the Delete icon in the upper right corner of the interface again, and a dialog box will pop up asking whether you want to delete or not. 4. If you're sure you want to delete the video, click the OK button. If you don't want to delete the video, click the Cancel button. Click on the "Help" icon to pop up the following interface: Record video with sound Pinch Zoom Help Click Here User Manual If you have any questions or feedback,please contact the vendor who sold the product to you. Click on the "User Manual" icon and the user manual information will appear.. Picture still Click on the palm icon will generate a still photo, allowing you to decide whether to save the photo. Click on the palm icon and the following interface will pop up: RERST 0.00m Click on the Save icon if you think the photo looks good,or click on the Cancel icon if you don't think it looks good. 7 Manual focus MF By moving the orange circular slider below the MF icon, you can adjust the focal length of the lens. RERST 0.00m RERST 0.00m Image before sliding MF slider icon Battery Level Indicator Focus the image by sliding the MF slider icon Settings Battery Full Battery Low Through the setting interface, you can set the optical frequency, image display mode and meter counter display unit mode. At the same time, you can see the firmware version and APP version information of the product in the setting interface. Click the setting icon, and the following interface pops up: Light frequency: 50Hz Display Mode: Standard Rotenc Unix: Metre (m) 1.10.20240105 Settings Display Time Save T9:V1.02B20240105 Note: After modifying any function in the setting interface, you need to click the Save button, so that the function can be modified successfully. Light frequency It has two options for light frequency: 50Hz and 60Hz, as shown in the following interface. Light frequency: 5500HHzz Display Mode: S60taHnzdard Rotenc Unix: Metre (m) 1.10.20240105 Settings Display Time Save T9:V1.02B20240105 The default frequency is 50Hz. If the frequency is 60Hz in your area, please select 60Hz and click Save button. 8 Display Mode It has three display modes: standard, always up round and always up full screen, as shown in the following interface: Settings Light frequency: 50Hz Display Mode: Standard Always Up Round Rotenc Unix: AMlewtareys(mU)p Full Screen 1.10.20240105 Save Display Time T9:V1.02B20240105 Standard Mode: the image on the screen rotates as the camera rotates. As shown in the following picture: RERST 0.00m RERST 0.00m The image displayed with The image displayed after the the Smartcam facing up. smartcam is rotated 180 degrees. Always Up Round Mode: the image on the screen remains the right way up on the app display, regardless of the camera's orientation And the video always appears round. As shown in the following picture: RERST 0.00m RERST 0.00m The image displayed with The image displayed after the the Smartcam facing up. smartcam is rotated 180 degrees. Always Up Full Screen Mode: the image on the screen remains the right way up on the app display, regardless of the camera's orientation As shown in the following picture: RERST 0.00m RERST 0.00m The image displayed after the The image displayed after the Smartcam is rotated 90 degrees. smartcam is rotated 180 degrees. Rotenc Unix Here represents the distance of the camera advancing or retreating through the glass fiber, which has two display modes of meters (m) and feet (ft), as shown in the following interface: Settings Light frequency: 50Hz Display Mode: Standard Rotenc Unix: Metre (m) Foot (ft) 1.10.20240105 Display Time Save T9:V1.02B20240105 Metre (m): The meter counter data are displayed in meters on the APP interface ,As shown in the following interface: 9 RERST 2.18m Note: The 2.18 meters displayed on the APP interface above means that the camera has moved 2.18 meters forward through the glass fiber. Foot (ft): The meter counter data are displayed in feet on the APP interface ,As shown in the following interface: RERST 7.15ft Note: The 7.15 feet displayed on the APP interface above means that the camera has moved 7.15 feet forward through the glass fiber. RESET: Click on RESET icon, the meter counter data will take the current position as the starting position to start counting again, as shown in the following interface: RERST 2.18m Are you make sure to reset the rotenc zero data? Cancle ok If you are sure to restart the count with the current position as the starting position click on OK, otherwise click on Cancel. Display Time By setting the display time function, you can display the current time on the APP interface. Settings Light frequency: 50Hz Display Mode: Standard Rotenc Unix: Metre (m) Display Time 1.10.20240105 Save T9:V1.02B20240105 Click the "Display Time" button, and the following interface will display as follows: Settings Setting: Enable Position: Top left corner Disable Color: Black Font Size: Middle Save Setting: There are two modes: enable and disable. Enable: If you select "Enable" and then click the Save button, the current time will be displayed on the APP interface. Disable: If you select "Disable" and then click the Save button, the current time will not be displayed on the APP interface. 10 Position When the current time is displayed in the APP interface, there are four positions displayed: Top left corner, Top right-hand corner, Bottom right-hand corner andleft lower corner. Settings Setting: Enable Disable Position: Top left corner Top left corner Color: Black Top right-hand corner Font Size: Middle Bottom right-hand corner Save Left lower corner Top left corner: Indicates that the current time is displayed in the top left corner of the APP interface. Top right-hand corner: Indicates that the current time is displayed in the Top right-hand corner of the APP interface. Bottom right-handcorner:Indicates that the current time is displayed at the Bottom right-hand corner of the APP interface. Left lower corner: Indicates that the current time is displayed in the left lower corner of the APP interface. Color This refers to the font color that displays the current time in the APP interface. There are16 colors available: Aqua, black, blue, brown, Dodge Blue, gray, green, khaki, light green magenta, orange, pink, red, Slate blue, white, yellow. Settings Setting: Enable Position: Top left corner Disable Color: Font Size: BAlqaucak Black MBliudedle Blown Dodger Blue S a v e Gray Green Khaki LightGreen Magenta Orange Pink Red Slate Bule White Yellow Font Size This Refers to the font size that displays the current time in the APP interface. There are small, middle and big three formats. Settings Setting: Enable Position: Top left corner Disable Color: Black Font Size: Small Middle Big For example, the current time is displayed in the Top left corner of the APP interface, the font color is white, and the font size is middle. Then click the Save button. The APP interface is displayed as follows: 2024-01-28 08:08:08 RERST 0.00m 11 App Version 1.5.20240125 in the lower left of the Settings screen is the version of APP smartcam wifi. This version is constantly changing. Firmware Version T9:V1:02B20240125 in the lower right corner of the Settings screen is the firmware version of smartcam wifi product. This version number will change after the product firmware upgrade OSD It is a function set for the convenience of users to record some information. Click on OSD icon to pop up the following interface: OK OSD Setting: Enable Position: Top left corner Color: Aqua Disable Cancel Font Size: Middle Visual & Audible OSD Setting: There are two modes: enable and disable. Enable: After selecting Enable, you can type the text you want in the white box, and then click the ok button, and the text will be displayed on the APP interface. If you do not want to display the text, click the Cancel button. Note: In the white box, limit each line to no more than 50 characters, no more than 10 lines, and no more than150 characters in total. Disable: After selecting Disable and then clicking the ok button, the APP screen will not display the text in the white box. Position: This refers to the position of the text in the white box when displayed in the APP interface. There are five types: Top left corner, Top right-hand corner, Bottom right-hand corner, Left lower corner and Center. OK OSD Setting: Enable Position: Top left corner Top right-hand corner Bottom right-hand corner Left lower corner Center Color: Aqua Disable Cancel Font Size: Middle Top left corner: The text in the presentation box is displayed at the top left of the APP interface. Top right-hand corner: The text in the presentation box is displayed at the top right of the APP interface. Bottom right-handcorner: The text in the presentation box will be displayed at the bottom right of the APP interface. Left lower corner: The text in the presentation box will be displayed at the bottom left of the APP interface. Center: The text in the presentation box will be displayed in the center of the APP interface. 12 Color It refers to the font color of the text in the white box of the OSD menu displayed in the APP interface. Thereare16 colors available: Aqua, black, blue, brown, Dodge Blue, gray, green, khaki, light green magenta, orange, pink, red, Slate blue, white, yellow. OK OSD Setting: Enable Disable Cancel Position: Top left corner Color: Aqua Black Blue Blown Dodger Blue Gray Green Khaki LightGreen Magenta Orange Pink Red Slate Bule White Yellow Font Size: Middle Font Size It refers to the font size of the text in the white box of the OSD menu displayed on the APP interface. There are small, middle and big three formats. OK OSD Setting: Enable Position: Top left corner Color: Aqua Disable Cancel Font Size: Small Middle Big For example, type in the white box: There is a crack in the top left of the pipe. position Select center, the font color is white, the font size is middle. OK OSD Setting: Enable Disable Cancel Position: Top left corner Color: Blue Font Size: Middle There is a crack in the top left of the pipe. Visual & Audible and then click the OK button. The APP interface will display as follows: RERST 0.00m There is a crack in the top left of the pipe. Note: After making any operational changes, remember to click OK. 13 Fast Charge When the camera is charged, the icon" " is displayed on the APP interface, and the camera can be fully charged in 60 minutes. as shown in the following interface: RERST 0.00m Record video with sound Record video with sound You can store both sound and video in a smart device. It can provide customers with accurate inspection reports. Digital pinch zoom PinchZoom Zoom in and out of an image by using two fingers to drag in and out of the smartcam wifi app screen.It can increases visibility and precision on inspections. RERST 0.00m RERST 0.00m The video image is displayed normally. Zoom in to display the video image. 14 5.Packing List 1 Wireless Sewer Pipe Inspection Camera 2 Skid with an external diameter of 1.57" 3 Skid with an external diameter of 3.15" 4 5.9' shoulder strap 5 Type C Charging Cable 1 2 5 4 3 15 6.Specifications Wireless Smart Inspection Camera Specifications Sensor Type Image Resolution Lens Viewing angle Focal length Aperture Wireless Range Frequency Operating Time Charging Time Battery Capacity Battery Type Charge Voltage Adjustable bright white LEDs 1/3" CMOS 720p (1280 x 720) manual focus Horizontal:88°, Vertical:48° F=2.4mm F2.0 up to 65 feet (In line of sight) 2412-2462MHz approx 9 hours (LEDs full) to 11hours 4hours fast charge 10000mAh lithium polymer DC 5V 12 white - control functionality via the app (off, 25%, half, full) Waterproofing grade IP67, When the back cover is tightened, it is dustproof and waterproof. Always up viewing function Record video with sound Built-in meter counter Glass fiber line length Automatic wire locking mechanism Charge Port Output Port Operating Temperature Storage Temperature Dimensions of the small skid When the camera rotates, The image can be set to way up all the time Yes Yes 98.4 feet Yes USB Type C USB 32 °F to 104 °F -4 °F to 122 °F 1 .57" X 1.68" Dimensions of the big skid 3 .15" X 1.73" Camera Dimensions(W x D x H mm) Product Dimensions(W x D x H mm) Product Weight 1 .1" X 1.62" ( The size of the spring included in the camera is 1 .1" X 6.15") 19.7" X 15" X 5.2" 15.7 LBS 16 7 . FA Q S 1. Q: How many smart devices can connect to a camera to watch video at the same time? A:There is no limit on the number of smart devices connected to watch videos, but the more smart devices connected to watch videos at the same time, the slower the video will be. It is recommended not to have more than two smart devices connected to the smartcam to watch videos at the same time. 2. Q: What does it mean that the video is striped? A: It's because the battery is low. Please charge the camera right away. 3. Q: I can connect to the WiFi, but it won't show an image in the iOS App? It shows an error message Error(100)(Connect the device time out!) A:Go to Settings-> Mobile Data-> Scroll down to find the SmartCam WiFi App and turn off to prevent the App trying to use mobile data. 4.Q: I can connect to the WiFi, but it won't show an image in the Android App? It shows an error message Error(100)(Connect the device time out!) A: Go to Settings-> Connections-> Data Usage-> Mobile Data only apps-> Scroll down: to find the SmartCam WiFi App. Turn off background data to prevent the App trying to use mobile data. 5.Q: Can the smartcam cameras work underground, underwater or inside metal pipes? A:Yes. 17 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 18