Fortis Foldable Walking Pad Treadmill

Safety & Warnings

Read all instructions before use. Retain this guide for future reference. Do not skip, substitute, or modify steps, as this could result in personal injury or product damage.

• Consult a physician before starting any exercise program, especially if you have medical conditions or are taking medication that may affect heart rate, blood pressure, or cholesterol levels.
• Stop exercising if you experience pain, chest tightness, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or nausea. Consult your physician if these symptoms occur.
• Always wear comfortable, well-fitting sports shoes and clothing. Stop immediately and consult your physician if you experience discomfort.
• This equipment is for adult use only. Keep children and pets away. Do not leave children unattended with the equipment. Contact with the moving surface can cause severe friction burns.
• Do not get on or off the treadmill while it is moving to avoid serious injury and damage.
• Unplug the power cord when not in use.
• This appliance is designed for consumer use. Use only as described.
• After assembly, inspect all hardware to ensure it is correctly positioned and tightly secured.
• Dry the treadmill after each use with a mild, non-abrasive cleaner and water solution.
• Ensure at least 50 cm of free space on each side and 200 cm behind the equipment for safety.
• Ensure all components are present before assembly.
• Use the equipment only as intended. If any components are defective or unusual noises occur during exercise, cease use immediately and contact help.kogan.com. Do not use until resolved.
• Keep fingers and other objects away from moving parts. Exercise care when setting up and folding the treadmill.
• Keep hands clear of hinges during setup and folding.
• Use proper lifting techniques and seek assistance when lifting or moving the equipment.
• Use the equipment in cool, dry conditions. Avoid storage in extreme temperatures or damp areas to prevent corrosion.
• This appliance contains no user-serviceable parts. Contact help.kogan.com for any failures or damage.
• This equipment is intended for indoor use only.
• The running belt may have a visible joint mark, which is normal and does not affect performance.

WARNING: KEEP OUT OF REACH OF CHILDREN

• Swallowing button batteries can lead to chemical burns, perforation of soft tissue, and death.
• If a child swallows or inserts a button battery, call the Poisons Information Centre immediately (13 11 26 for Australia, 0800 764 766 for New Zealand).
• Ensure the battery compartment is securely fastened. Do not use if it is not secure.
• Dispose of used button batteries immediately and safely.
• Inform others about the risks associated with button batteries.
• Severe burns can occur within 2 hours of ingestion. Seek immediate medical attention.

Components

Accessories

Overview

The treadmill includes the following parts:

• Handrail
• Display
• Walking Belt
• Roller
• Adjustment Screws
• Phone Holder
• Motor cover
• Knob

Remote Control

The remote control has the following buttons:

• Start/stop: Starts or stops the walking machine.
• Mode (M): Cycles through operation modes (Time, Distance, Calorie).
• Speed increase (+): Increases speed in 0.1 km/h increments.
• Speed decrease (-): Decreases speed in 0.1 km/h increments.
• Power: Turns the treadmill on or off.

Installation

Two people are recommended to lift the packaging.

1. Lift the handrail to the upright position and secure it with the M8x15mm knobs.
2. Attach the phone holder to the handrail and secure it with the M8x30mm knob.
3. Connect the power supply to complete the installation.
4. Ensure the belt is centered on the treadmill and adjust if necessary.

Note: The running belt may have a visible joint mark, which is normal and does not affect performance.

Operation

Plug the power cable into an electrical outlet and turn the red switch ON. The switch will illuminate, and the treadmill will emit a sound, turning on the display.

Turning the Treadmill On/Off

1. Press the Power button on the remote to turn the treadmill on.
2. Press the Power button again to turn the treadmill off.

Note: To ensure safety, wait for the treadmill to come to a complete stop before turning it off.

3. Press the Start/stop button to begin walking. Press it again when finished.
4. For optimal maintenance and lifespan, turn off the power after 2 hours of continuous use and allow the machine to rest for 10 minutes before the next use.

Adjusting the Speed

• Speed Increase: Press the Speed Increase button to raise the speed in 0.1 km/h increments. Holding the button for over 2 seconds will continuously increase the speed.
• Speed Decrease: Press the Speed Decrease button to lower the speed in 0.1 km/h increments. Holding the button for over 2 seconds will continuously decrease the speed.

Changing Modes

When the treadmill is in standby, press the Mode button on the remote to cycle through three countdown modes: Time, Distance, and Calorie. After selecting a mode, use the speed increase and decrease buttons to set the countdown values, then press the 'Start' button to begin.

Display

• Speed: Displays your current workout speed.
• Time: Shows elapsed workout time (0.0 - 99.00 minutes).
• Distance: Displays accumulated distance travelled (0.0 - 99.99 miles).
• Calories: Displays accumulated calories burned (0 - 999.9 C).

Cleaning & Care

Regular cleaning extends the treadmill's lifespan.

• Disconnect the power before cleaning.
• Use a small amount of mild detergent on a 100% cotton cloth. Do not spray detergent directly on the belt or use acidic/corrosive detergents.
• Do not wipe under the walking belt.
• Avoid splashing water onto electrical components or under the running belt.
• Clean the exposed sides of the running belt to reduce impurity accumulation.
• Ensure sports shoes are clean and free of foreign objects.
• Open the motor cover at least once a year to vacuum and clean the motor.

Note: Unplug the power supply before moving the front cover.

When not in use, keep the safety lock out of children's reach. Store the silicone oil bottle safely away from children. If ingested or in eyes, rinse with water and seek medical attention promptly.

The treadmill can be stored vertically to save space. Before standing it up, turn off the power switch and unplug the power cord. Carefully stand it up and place it against a wall, ensuring it's at an angle to prevent tipping.

Belt Lubrication

• Disconnect the power before lubricating.
• Lift the belt edge and apply 5-10ml of silicone oil to the inner surface. Do not over-apply, as this can cause the belt to slip.
• Run the treadmill at 4 km/h for approximately 10-20 seconds.
• Lubricate the belt every 3 months.

Apply lubricating oil according to usage:

• Lightweight users (less than 3 hours/week): Once a month.
• Heavyweight users (over 7 hours/week): Every half month.

Belt Adjustment

If the belt slips or is misaligned, it needs adjustment. A loose belt may slip during use. A tight belt can reduce motor performance and increase wear.

The correct tension allows lifting the belt sides by hand about 50-75mm away from the running board.

• Start the treadmill at a low speed (4 km/h).
• To adjust the belt left: turn the left adjusting screw clockwise by 1/2 turn.
• To adjust the belt right: turn the right adjusting screw clockwise by 1/2 turn.
• To adjust belt tension: turn both left and right adjusting screws clockwise by 1/2 turn simultaneously.
• After each adjustment, run the treadmill for 1-2 minutes to check if the issue is resolved. Adjust again if necessary.

Troubleshooting

Error Messages

Specifications

• Rated voltage: 220-250V AC
• Peak power: 1.0HP
• Rated power: 0.65HP
• Speed: 1-6 km/h
• Running platform area: 390x1030mm
• Maximum load: 100KG

Notes

(Blank section for user notes)