Aurzen BOOM mini USER MANUAL

Troubleshooting Guide

1. Content Not Mirroring/Casting: Use pre-installed streaming apps or refer to the "Google Cast" section for casting instructions.
2. Fuzzy Image: Adjust focus or keystone correction. Ensure the projection distance is within the effective focal range. Clean the lens with a blower or soft brush.
3. Non-rectangular Image: Ensure the projector is perpendicular to the screen or use the keystone correction function.
4. Automatic Keystone Correction Failure: Check that the adjustment sensors are not blocked. Reposition the projector for perpendicular alignment.
5. Autofocus Failure: Check that the adjustment sensors are not blocked. Adjust the projector's distance to the recommended range.
6. Remote Control Unresponsive: Verify battery installation and charge. Remove obstructions between the projector and remote. Ensure the remote is paired via Bluetooth. Check for stuck buttons and power indicator status. Contact support if issues persist.
7. Connecting BT Devices: Navigate to Homepage > Dashboard > All settings > Remotes & Accessories to manage Bluetooth devices.
8. Power Adapter Warmth: It is normal for the power adapter to generate heat during use, as it meets safety standards.
9. Contact Support: For any issues, please contact support@aurzen.com.

Read Before Use

Read the Product Instructions carefully for your safety and interests. Trademarks and names mentioned belong to their respective owners. Product instructions are for illustration purposes only and actual products may vary. Aurzen is not liable for damages resulting from failure to comply with instructions. Aurzen reserves the right to interpret and modify instructions.

In the Box

The package includes:

• Projector
• Remote Control (Batteries not included)
• Power Adapter
• User Manual

Projector Overview

Projector Components:

• Lens
• Air Inlet
• Dust-Proof Cover
• Stand
• Adjustment Sensors
• IR Receiver
• Speakers (Dolby Audio)

Remote Control

The remote control features buttons for Power, Google Assistant, User Profile, OK, Back, Focus Adjustment, Mute, Streaming Apps, Input Source, Settings, Navigation, HD Quick Switch, and Home.

Remote Indicator Light Status:

• Not paired: Solid red
• Pairing: Flashing blue
• Paired: Solid blue

Quick Start

1. Projector Installation: Choose the appropriate projection mode (Front Desktop, Rear Ceiling, Rear Desktop, Front Ceiling). Ensure correct projection mode is selected during setup or via Homepage > Dashboard > All settings > Projector > Projection Mode. Mounting Screw: 1/4'' (not included).
2. Power On/Off: Remove the lens cover. Connect the power adapter. Press the Power Button to turn on. Press and hold the Power Button and then press the OK button to turn off. Pressing the power button once puts the projector in standby mode.
3. Remote Control Pairing: Follow the on-screen pairing prompt. Bring the remote within 0.33 ft/10 cm of the projector and simultaneously press and hold the 'Back' and 'Home' buttons.

Setup Wizard

Follow the on-screen wizard to select projection mode, language, region, and sign in with your Google Account or set up basic TV.

Image Adjustment

Focus

• Auto Focus: Automatically adjusts focus based on detected movement. Enable 'Auto Focus On Startup' or 'Auto Focus On Deep' via Homepage > Dashboard > All settings > Projector > Focus > Advanced for enhanced experience.
• Electric/Manual Focus: Use remote buttons or navigate to Homepage > Dashboard > All settings > Projector > Focus > Manual Focus to sharpen the image.

Keystone Correction

• Auto Keystone Correction: Automatically corrects keystone distortion based on detected movement.
• Manual Keystone Correction: Adjust image shape by four points via Homepage > Dashboard > All settings > Projector > Keystone > Manual Keystone.

Intelligent Screen Fit

Automatically adjusts the projected image to fit the screen. Enable via Homepage > Dashboard > All settings > Projector > Keystone > Advanced > Auto Screen.

Intelligent Obstacle Avoidance

Automatically adjusts the projected image to avoid objects on the projection surface. Enable via Homepage > Dashboard > All settings > Projector > Keystone > Advanced > Auto Avoid.

Image Scaling

Adjust image size (zoom) via Homepage > Dashboard > All settings > Projector > Zoom.

Projector Connection and Input Source

Connect your device and select the input source.

• USB Connection: Insert disk, navigate to Homepage > Apps > MultiMediaPlayer to play files.
• HD Connection: Connect device, press Input button on remote or go to Homepage > Dashboard > Inputs and select HD.
• Wired Speaker and Headphones: No specific input source selection required.

WIFI Connection

Connect to your router's Wi-Fi via Homepage > Dashboard > All settings > Network & Internet.

Google Assistant

Use voice commands to find content, control the TV, and access smart home devices. Press the Google Assistant button on the remote.

Google Cast™

Stream content from your phone, tablet, or laptop to the projector. Ensure devices are on the same wireless network, open a streaming app, tap the casting icon, and select AURZEN BOOM MINI. Due to copyright, some content may require installing apps directly on the projector.

Screen Mirroring (Android Devices)

Mirror your Android device screen using the Google Home app. Ensure same network connection, install Google Home app, go to Devices tab, select AURZEN BOOM MINI, and tap 'Cast my screen'.

Screen Mirroring (AirScreen App)

Mirror iOS/Android device screens using the AirScreen app. Ensure same network connection, install AirScreen from the Apps tab, and follow on-screen instructions.

BT Speaker Mode

Use the projector as a Bluetooth speaker. Go to Homepage > Dashboard > All settings > Projector > BT Speaker Mode to enable. Pair your mobile device by searching for AURZEN BOOM MINI in your device's Bluetooth settings.

Tip: Press and hold the 'Back' button on the remote for 2 seconds to exit BT Speaker Mode.

More Settings

• Color Temperature: Adjust via Homepage > Dashboard > All settings > Display & Sound > Picture > Advanced Settings > Color Temperature (User, Cool, Standard, Warm).
• Reset: Restore projector to factory settings via Homepage > Dashboard > All settings > System > About > Reset.
• System & Product Info: View system and product information via Homepage > Dashboard > All settings > System > About.

Projection Distance and Size

For optimal image quality, a 60" projection size is recommended at a distance of 5.93ft (1.81m). Adjust distance as needed based on content. Ambient darkness improves clarity.

Specification

Statement

Google TV is a trademark of Google LLC. Dolby, Dolby Audio, and the double-D symbol are registered trademarks of Dolby Laboratories. Netflix is a trademark of Netflix, Inc.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. This equipment has been tested and found to comply with the limits for a Class B digital device. Minimum separation distance of 20cm (8 inches) between the equipment and a person's body is recommended for RF exposure. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Canada Compliance Statement: This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference. Minimum separation distance of 20 cm (8 inches) between the equipment and a person's body is recommended. Operation in the 5150-5250 MHz band is for indoor use only.

Recycling: This product bears the WEEE symbol, indicating it must be handled according to European directive 2012/19/EU for recycling or dismantling.

Symbols:

• [Class II equipment symbol]
• [AC voltage symbol]
• [DC voltage symbol]
• For indoor use only
• [Exclamation mark symbol]: Important operating and maintenance instructions are in the literature.
• The mains plug is used as the disconnect device and should be easily accessible.

CE Compliance: Shenzhen Neutop Optoelectronics Co., Ltd. declares compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://aurzen.s3.us-west-1.amazonaws.com/resource/doc/Boom_mini_Neutop_Declaration_of_Conformity.pdf

Radio Frequency Specification (EU and UK Regions)

Operations in the 5.15-5.35GHz band are restricted to indoor usage only in certain countries. The product complies with “RG1 IEC/EN 62471-5:2015”.