Smart Watch User Manual

Introduction

Thank you for choosing our product! The product supports waterproof with IP67 level, it is available to wear it while wash hands, in raining, etc. Do not use it when have a hot shower/bath or sauna, the vapors will get into the host, scratch damage of peripheral components. All these are beyond the scope of the warranty.

Operation Guide

Long press to switch ON/OFF the watch. Press to wake the screen and turn it off.

Charging Instruction

This product adopts magnetic force charging. Connect the charging point to the back of the device charging pins; it will charge automatically. Supports PC USB or standard 5V charger.

Caution: Do not connect the magnetic charging cable's 4 pins with conducting material at the same time, as it may cause a short circuit.

APP Download Method

To connect the watch to your phone, download the "Fundo" app first. Refer to the following 2 methods:

• Android Phone: Search and download the "Fundo" app from Google Play.
• iOS Phone: Search and download the "Fundo" app from the App Store.

Alternatively, scan the QR code image below using a browser or any scanner to download "Fundo". [QR Code for Fundo App Download]

Bluetooth Connection

Requirements:

• Android Phone: Supports operating system 4.4 and above.
• iOS Phone: Supports original operating system 7.0 and above.

Pair with Android Phone

1. Turn on your smartphone's Bluetooth switch. Enter the 'Fundo' menu, select the bottom right corner, tap 'More', then 'add device', and finally 'Search'. The app will automatically search for nearby enabled Bluetooth devices.
2. Find the watch name and pair with it. After successful pairing, the Bluetooth icon in the watch drop-down menu will turn green. The watch and phone can now search each other successfully. You will feel vibration and hear ringing on the mobile phone. Click 'Bluetooth connect' (Connectable 3.0). After successful pairing, the Bluetooth icon in the watch drop-down menu will be gradient blue-green.

Pair with iOS Phone

1. Turn on your smartphone's Bluetooth switch. Enter the 'Fundo' menu, select the bottom right corner, tap 'More', then 'add device', and finally 'Search'. The app will automatically search for nearby enabled Bluetooth devices.
2. Find the watch name and pair with it. After successful pairing, the Bluetooth icon in the watch drop-down menu will turn green. A Bluetooth device will be displayed on the mobile phone's Bluetooth menu interface.
3. On the watch, click "Bluetooth Call" → 'Search for Bluetooth devices'. Find the phone name, match it, and click 'pair'. After successful pairing, two Bluetooth devices will be connected successfully in the mobile phone's Bluetooth menu interface.
4. The Bluetooth icon in the watch drop-down menu will be gradient blue-green. The watch and phone can search each other successfully. Through the watch, you can search for your device, which will cause vibration and ringing on the mobile phone. Through the mobile phone, you can find the device, and the watch will vibrate and ring.

Setting Notifications

On your phone, go to Settings → App Management, find "Fundo", and enable all permissions. Then go to Notifications → find "Fundo" and turn on all notifications. Finally, in "Fundo", select "Application push" and allow all.

Main Function Introduction

Phone

• Contacts: Synchronize mobile phone contacts, view, and dial via Bluetooth.
• Dialer: Connect the mobile phone to dial; you can make calls on the watch.
• Call Logs: Synchronize phone call records.
• Information: Synchronize SMS content from your mobile phone.
• Notifier: Synchronize all messages from your cellphone.

Sports

• Sports Mode: Supports walking, running, mountaineering, cycling, basketball, badminton, table tennis, football, settings, and historical records.

Pedometer

Enter the pedometer menu. After setting personal information, wear the watch. The pedometer function is enabled by default. Swing your arm normally while walking; the pedometer will count steps and calculate burned calories. After data generation, ensure Bluetooth connection with the mobile phone is successful. The watch and phone can search each other. The mobile phone APP can then click 'Sync data' to synchronize steps. To reset step count, go to watch settings → restore factory settings → watch automatic restart.

Sleep Monitor

• Sleep monitoring is automatically turned on from 21:00 to 9:00 AM.
• After successful Bluetooth connection between the watch and the mobile phone, click 'Sync Data' on the mobile phone's APK to synchronize sleep data from the watch.

Health Monitoring

• Heart Rate: Wear the watch close to your wrist to measure real-time heart rate.
• Blood Pressure: Enter the blood pressure menu, place the watch front on your arm, and click 'Start'. The watch will automatically measure blood pressure, which will then be synchronized to the APP.
• Oxygen: Enter the blood oxygen menu, place the watch front on your arm, and click 'Start'. The watch will automatically measure blood oxygen levels, which will then be synchronized to the APP.
• ECG: Enter the ECG menu, place the watch front on your arm, and click 'Start'. The watch will automatically measure ECG values, which will then be synchronized to the APP.

Remote Camera

When the phone cannot be locked, the watch can enter Bluetooth camera mode. The phone will display the camera interface; tap the watch to take a photo, which will be stored on the phone.

BT Music

Enter the music menu and click 'play' to successfully play music from your phone.

Additional Features

• Find Phone: Click "find phone". The connected phone will ring. After finding the phone, tap "End" on the phone to stop the alarm. This feature works on both the watch and app sides.
• Sedentary Reminder: Set your preferred time interval (30-minute intervals, minimum 0m to 300m maximum). When the sedentary time is reached, the watch will ring and vibrate to remind you to get up.
• Alarm: Customize alarm time, number of rings, ringtones, and reminder types.
• Stopwatch: Click the bottom-left button to start timing. In this interface, click the bottom-right button to continue timing, and the bottom-left button to pause timing. Slide up and down to view historical data. When the stopwatch is paused, click the bottom-right button to clear data.
• Calculator: Enter the calculator and use the soft keyboard to input data and perform calculations.
• Calendar: View the current date. Click the rose-red round button to view the current monthly calendar, and swipe up/down to switch months.
• Theme: You can choose from 2 themes.
• BT Call: On the watch, click 'Bluetooth search device', select the Bluetooth name of the mobile phone you want to pair with, click 'pair', and confirm on the phone/watch side to pair successfully.

Settings

BT Setting

If the Bluetooth connection between the watch and the mobile phone is unsuccessful, you can turn Bluetooth on/off in the watch settings.

About

View the watch's Bluetooth name, device address, Bluetooth address, and watch software version number.

Power Saving

Turn on to enter power-saving mode.

New Notification Bright

The watch synchronizes new messages from the paired mobile phone, and the watch screen lights up to remind you.

Weather

The watch synchronizes and displays the weather.

Unit

You can switch between metric and inch display for the watch.

Motion & Interface

Motion

• Gesture Wake-up System: When enabled, tilt the watch to turn off the screen, or lay the watch flat on the screen. To brighten the screen, position it 90 degrees in front of you.
• Swing Menu Page: Shake the watch menu to turn pages in the first-level menu.

Interface

• Shake to Answer Call: Shake the watch two or three times to answer an incoming call.

Sound

Select incoming call profiles, ringtones, notification ringtones, and adjust the volume for multimedia, ringtones, and notifications.

Volume

Set the volume for multimedia, ringtones, and notifications.

Display

Set screen brightness and backlight off time.

International

Turn off automatic synchronization to choose and set various languages. Turn on automatic synchronization to have the watch synchronize with the language of the paired mobile phone.

Reset

Recover the device to its default settings.

QR Code

Scan the QR code to download and install the "Fundo" APP. [QR Code for Fundo App Download]