Getting Started

Congratulations on your purchase of the Sureshot PINLOC 6000iM. This owner's guide will help you achieve optimal performance by explaining the Sureshot PINLOC 6000iM's features and operation, along with how to care for your laser. To ensure the best performance and longevity, please read these instructions before using your PINLOC 6000iM.

The PINLOC 6000iM is packed with features such as:

• i: Intelligent Pin seeking technology. This advanced mode uses uniquely developed software that ensures the closest object is chosen, eliminating objects beyond the flag.
• M: Internal magnet on the right side of the laser which enables it to be attached to any magnetic metal surface.

Device Overview

The device features several key components:

• Power Button: Press once to turn on the LCD display; press again to measure distance.
• Scan Button: Press to toggle Scan Mode ON/OFF.
• Mode Button: Press and hold for 5 seconds to toggle between metres/yards. A quick press cycles between PINLOC Mode and Default Mode.
• Adjustable Eyepiece: Allows focus adjustment for users with or without glasses.
• Battery Door: Located on the device for battery access.
• Magnet: An internal magnet is located on the side of the laser.

Contents of Box

• Sureshot PINLOC 6000iM Laser
• Premium Protective Pouch
• Quick Start Guide
• Lens Cloth
• Wrist Strap
• Long Life Lithium Battery (CR2 3V)

To begin using your PINLOC 6000iM, remove the protective plastic from the battery and insert it into the laser rangefinder. Refer to page 2 for the Battery Door location.

Internal Magnet

The PINLOC 6000iM features an internal magnet on its side, enabling attachment to any magnetic metal surface for quick and easy access (e.g., on a golf cart or buggy). Ensure the connection is strong enough before attaching. Improper use of the internal magnet is not covered under warranty.

Adjusting the Focus

The PINLOC 6000iM is designed with an adjustable eyepiece (dioptre). To adjust focus for clear vision, look through the eyepiece and turn the dioptre a quarter turn left or right until the view is sharp.

Operating Instructions

Hold the PINLOC 6000iM to your eye. Press the Power button once to turn it on. The LCD display will show three lines and a small rectangular box. Align your target within the rectangular box, then press the Power button again. The distance to the target will be displayed instantly.

Priority Loc

The PINLOC 6000iM instinctively locks onto the nearest target, even if it's the smallest among multiple objects. This feature ensures accurate distance readings by scanning the area and displaying only the nearest distance. It activates automatically when the Power button is pressed once.

PINLOC Mode (?)

PINLOC technology ensures even the smallest target is locked on from the longest possible distance, delivering pinpoint accuracy. This feature is automatically engaged when the Power Button is depressed quickly once.

Scan Mode (S)

The Scan feature provides continuous distance updates to various targets across a panoramic area. To use Scan Mode, press the side button once. Then, press the Power button and pan across the target area. An "S" will appear in the viewfinder to indicate Scan Mode is active. To finish scanning, press the Power Button again; the crosshairs will disappear, and the laser will stop scanning.

Decimal Place (dE)

When the decimal place indicator is shown on screen, all measurements are displayed to 1 decimal place. To toggle this feature on or off, quickly double-press the Mode button.

Display and Settings

Display Loc

Each time the Power button is pressed, the distance is displayed on screen for 15 seconds before the screen automatically switches off.

Unit Measurement Change

The PINLOC 6000iM can measure distances in metres or yards. Press the Mode button for 5 seconds to change the unit of measurement. You can also toggle the decimal point display by pressing the Mode button for 3 seconds.

Automatic Power-Save

The PINLOC 6000iM will automatically switch off after 15 seconds of inactivity.

Battery Indicator

A battery level warning will appear when the battery is running low. The battery can be replaced by removing the battery door (refer to page 2). Any brand of CR2 3V lithium battery can be used.

Accuracy

The PINLOC 6000iM delivers accuracy at ±1 metre/yard. Range is dependent on target reflectivity, color, surface, shape, size, and angle. For example, red is highly reflective, providing longer range than black. Shiny surfaces offer more range than dull ones, and smaller targets are harder to range than larger ones. A 90° angle provides good range, while steep angles limit it. Lighting, rain, and fog can also affect accuracy; less light reduces the unit's maximum range.

Registration and Care

Registering Your Laser

Follow instructions at www.mgigolf.com/register-sureshot and enter the serial code found on the box/unit (starts with 5I, e.g., 5I12345). Registering for warranty purposes helps the Sureshot customer service team document your equipment and aids in warranty claims. It also helps if your unit is lost and found.

Cleaning and Maintenance

Gently blow away dust or debris from the lenses or use the provided lens cloth. For dirt or fingerprints, rub in a circular motion. Avoid coarse cloths or excessive rubbing, which can scratch the lens surface. For thorough cleaning, use photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol. Always apply fluid to the cleaning cloth, never directly onto the lens. For protection, always store your PINLOC 6000iM in the provided pouch.

Disclaimer

WARNING: This device contains a magnet. Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep sufficient distance if you use these devices. Warn others who wear these devices from getting too close to magnets.

CAUTION: Avoid direct sunlight into the eyepiece to prevent damage to the display/internal components. When using the internal magnet to attach the device to a cart bar or frame, tilt the device so the eyepiece faces the ground, not upwards towards the sun. Store the device in its case when not in use for additional protection.

• Magnet adhesive force may permanently decrease if exposed to temperatures above 175°F (80°C).
• Magnets produce a strong magnetic field that can damage phones, TVs, laptops, computer hard drives, credit/ATM cards, data storage media, mechanical watches, hearing aids, and speakers. Keep the unit away from such devices.
• Magnets have strong fields that can pinch skin and fingers. Use caution when attaching the unit to metal.
• Replace the battery when the battery icon is empty, as low battery can affect accuracy. If not using the device for a long period, remove the battery to prevent drainage.
• Do not touch the eyepiece directly or disassemble the device.
• If the external lens is dirty, clean it with the lens cloth or isopropyl alcohol.
• Avoid impacts or high pressure.
• This unit is water resistant only; it is not waterproof.
• Avoid prolonged exposure of the lens to direct sunlight, as this may damage the optics.
• The internal magnet should not be removed.
• Do not attempt to attach the laser to a non-magnetic, non-metallic surface.
• Do not attach the laser to an unstable surface that could disrupt the magnetic connection.
• It is the operator's responsibility to safely and securely attach the laser via the internal magnet to a sufficiently strong magnetic surface.
• Any damage caused by improper use of the internal magnet is not covered under warranty.
• Any damage caused by the laser falling or being dropped due to improper use of the internal magnet is not covered under warranty.

Need Help?

Our team is available via website, telephone, or email. Contact us first for the fastest response to your query, rather than returning to the place of purchase.

Website: www.mgigolf.com

Contact Information

MGI AUSTRALIA

Service Email: support@sureshotgps.com

Live Chat: Visit www.mgigolf.com

Toll Free within Australia: 1300 644 523 (excludes mobiles)

Western Australia/Internal phone: +61 3 8872 6700

Local Service Centres: Visit www.mgigolf.com to locate your nearest service centre.

MGI USA

Service Email: serviceusa@mgigolf.com

Live Chat: Visit www.mgigolf.com

Telephone: 1800 617 2990

MGI GLOBAL

Sales Email: globalsales@mgigolf.com

Service Email: customerservice@mgigolf.com

Live Chat: Visit www.mgigolf.com

Follow us on: [Facebook Icon] [Instagram Icon]

Specifications

Warranty

Limited Warranty

Sureshotgps™ Pty Ltd ("SS") warrants that the product delivered in this package will be free from material defects for one (1) year following the date of purchase from SS or its authorized reseller. A two (2) year warranty is provided if you register on sureshotgps.com within 30 days of purchase (Australia only). Specifications are subject to change without notice.

A "material defect" is defined as any defect in an SS product that can be reproduced by SS and is a substantial nonconformity from the published specifications. SS is not responsible for any loss or damage resulting from defects or issues occurring or notified more than one year from the date of purchase.

This Limited Warranty does not apply to:

• The battery.
• Normal wear and tear.
• Components opened or repaired by unauthorized persons or companies.
• Damage caused by: MISUSE, MOISTURE OR LIQUIDS, EXPOSURE TO HEAT, ACCIDENT, ABUSE OR NEGLECT.
• Dropping the device, which can permanently damage the laser, optical lenses, and LCD display.
• Physical damage to the surface, including cracks or scratches on the LCD screen and lenses.
• Defects caused or contributed to by neglect, misuse, or accident, or by alterations made by non-authorized SS personnel or repairers.

SS, at its sole discretion, will determine if the terms of this warranty apply to returned products. If a product is covered by this warranty, SS or its authorized repairers will, at SS's sole discretion, repair or replace it free of charge. SS is not liable for any incidental, special, or consequential loss or damage. Any liability under this warranty is limited to the purchase price of the product.

This warranty is subject to relevant Federal, State, or Municipal laws. Disputes will be conducted in accordance with the laws of Victoria, Australia.

Returning a Product for Warranty

Before returning any product, contact the SS Customer Support Group to obtain an RA (Return Authorization) number. Visit www.sureshotgps.com for support contact details. If the product is likely defective, an RA number will be issued for placement on the outer package. SS cannot accept products without an RA number. Warranty returns must include a copy of the dated proof of purchase. Ship the product with the RA number to SS. You assume the risk of damage or loss in transit. Use the original container (or equivalent) and pay shipping charges. SS may replace or repair the product with new or reconditioned parts. SS warrants repaired or replaced products for ninety (90) days from the return shipping date or the remainder of the original warranty period, whichever is longer.

In case of inconsistency between this Limited Warranty and any warranty included in the product packaging, this Limited Warranty shall prevail.

Consumer Law Rights: Our goods come with guarantees that cannot be excluded under Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to other consumer rights and remedies.

The consumer is responsible for expenses associated with a warranty claim. To make a claim, cease using the goods immediately and contact SS directly using the details in this User Manual. Proof of purchase is mandatory.