Owner's Manual for AUDAC models including: WP220 Universal Wall Panel Bluetooth Receiver, WP220, Universal Wall Panel Bluetooth Receiver, Wall Panel Bluetooth Receiver, Bluetooth Receiver, Receiver
On the front side of the wall panel, you'll find a Bluetooth pair button with a handy LED indicator to check if its in pairing mode.
WP220 Universal wall panel - Bluetooth receiver input - 80 x 80 mm Highlights: · Elegant design to blend in with any environment · Compatible with EU (80x80 mm) installation materials · Signal transmission over twisted pair (CAT5E) or better cabling · Signal transmission insensitive for interferrence and noise Product information: The WP220 is a remote universal wall panel with Bluetooth receiver input that can be used in combination with various AUDAC hardware (ARES5A, MTX series, AMP523 and more). It was never easier connecting your Bluetooth enabled device with your audio installation using this wall plate. It will enable you to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted-pair CAT5e or better cabling. On the front side of the wall panel, you'll find a Bluetooth pair button with a handy LED indicator to check if its in pairing mode or already connected to a device. Bluetooth pair name can be customized as desired. The Bluetooth receiver works with iPhones, iPads, iOS & Android smartphones, tablets, PC, Laptops, Desktops, etc... The WP220 is available in 2 colours (White - RAL9003 & Black - RAL9005) and is compatible with most standard EU (80x80 mm) style in-wall boxes for solid and hollow walls. With the Elegant ABS front panel with glass, it will blend into any environment. Applications: · Education · Retail · Bars & Restaurants · Corporate AUDAC - WP220 - 09/02/2023 10:07 UTC We reserve the right to change specifications without notice, this is part of our policy to continually improve our products. Page 1 of 4 System specifications: Control Inputs Outputs Connection Wall Panel Level Type Bluetooth pairing button with LED Output level +12 dBV enable / disable (DIP switch on rear) Bluetooth enable / disable (DIP switch on rear) Mono / Stereo (DIP switch on rear) Bluetooth receiver (Version 5.0) +12 dB 0 dB 8-pin terminal block (3.81 mm pitch) output connection Product Features: Dimensions Colours Front finish Accessories Optional 80 x 80 mm (W x H) (Remote wall panel) Black (RAL9005) (WP220/B) White (RAL9003) (WP220/W) Elegant ABS front panel with glass Surface mount Installation boxes WB200 - Surface mount wall box for WP & DWP series Flush mount Installation boxes Flush mount box for 45 x 45 mm wall panel Solid wall - WB45S/FS Flush mount box for 45 x 45 mm wall panel Hollow wall - WB45S/FG Standards & regulations: CE LVD EMC CB FCC cTUVus RoHS Reach compliant Variants: Compliant to EN 62368 Compliant to EN 55032, EN55024, EN 61000-3-2/3 Compliant to IEC 62368 Part 15C Compliant to IEC 62368+UL62368 Compliant Compliant · WP220/B - Black version · WP220/W - White version AUDAC - WP220 - 09/02/2023 10:07 UTC We reserve the right to change specifications without notice, this is part of our policy to continually improve our products. Page 2 of 4 Architects' and Engineers' Specifications: The remote wall panel must have the possibility to connect via Bluetooth. The connection shall be possible thanks to a pair button on the front of the device. This must be accompanied by a status indicator LED. The wiring between the wall panel and various AUDAC hardware shall be done by using standard CAT5e or better cabling which transfers audio signal to the analogue AUDAC hardware while providing the power supply for the wall panel. The connection shall be made through an 8-pin Terminal Block Connector provided on the backside of the wall panel. The back of the device must contain 6 DIP switches. These DIP switches must enable or disable following functions: Mono-mode, 0dB to 12dB switchable (left or right) and Bluetooth. The wall panel housing shall be constructed out of ABS with a front panel of glass. De device must have a build-in depth of 52,7mm and must be compatible with most standard EU (80x80 mm) style in-wall boxes for solid and hollow walls. It's weight shall not exceed 0.072 kg. AUDAC - WP220 - 09/02/2023 10:07 UTC We reserve the right to change specifications without notice, this is part of our policy to continually improve our products. Page 3 of 4 Technical drawings: 80 [3,15] 80 [3,15] 38,1 [1,5] 9 [0,354] MM [INCH] WP220 Weight TBA TBA Product description REMOTE WALL PANEL INPUT BLUETOOTH - 80x80 MM Outer dimensions Ø60 [Ø2,362] 80 x 80 x 47,1 mm 3,15 x 3,15 x 1.854 " (w x h x d) Unit height N/A AUDAC - WP220 - 09/02/2023 10:07 UTC We reserve the right to change specifications without notice, this is part of our policy to continually improve our products. Page 4 of 4iTextSharp.LGPLv2.Core 1.7.0.0