Fanttik D12 PLUS 3 x 360° Laser Level

1. Safety Warning

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

⚠️ DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

⚠️ WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

⚠️ CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

ℹ️ NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

⚠️ WARNING: Read and understand all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

⚠️ WARNING: Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable parts inside. Serious eye injury could result.

⚠️ WARNING: Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Symbols and Warning Labels

The label on your tool may include the following symbols:

• V: volts
• mW: milliwatts
• ⚡: laser warning symbol
• nm: wavelength in nanometers
• 2: Class 2 Laser

For your convenience and safety, the following labels are on your laser:

WARNING: To reduce the risk of injury, user must read instruction manual. WARNING: LASER RADIATION. DO NOT STARE INTO BEAM. Class 2 Laser Product

General Precautions

• Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the hands of untrained users.
• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause anyone to intentionally or unintentionally stare into the laser beam. Serious eye injury could result.
• Do not position the laser near a reflective surface which may reflect the laser beam toward anyone's eyes. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are removed user or others may inadvertently expose themselves to radiation.
• Position the laser securely on a level surface. Damage to the laser or serious injury could result if the laser falls.

Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• Do not operate laser tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a laser tool. Distractions can cause you to lose control.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a laser tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection may be required for appropriate conditions.

Tool Use and Care

• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
• Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

Service

• Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.

2. Package Content

The package includes the following items:

• D12 Plus Laser level x 1
• Li-ion battery x 1
• Super magnet Bracket x 1
• USB cable x 1
• Handbag x 1
• Target plate x 1
• Use Manual x 1

3. Product Overview

The Fanttik D12 PLUS Laser Level features the following components:

Main Unit:

• 1 - Horizontal Laser outlet
• 2 - Vertical Laser outlet
• 3 - Pendulum Lock
• 4 - Charging Port
• 5 - Battery Chamber
• 6 - Tripod thread fitting (1/4″-20)
• 7 - Vertical Laser outlet

Control Panel:

• 8 – Power display
• 9 – Pulse Indicator
• 10 - Power Switch (⏻)
• 11 - Pulse Switch (?)

⚠️ WARNING: Never modify the tool or any part of it. Damage to the laser or personal injury could result.

4. Operation and Function

Turning the Laser On/Off

• Way One: Turn on the laser by pressing the Power Switch (10) for 0.5 seconds. Shut it off by pressing it for 2 seconds.
• Way Two: Turn on by pushing the Pendulum Lock (3) to the Unlocked position. Turn off by pushing it back to the locked position.

Switching Laser Lines

• When the laser is on, short press the Power Switch (10) to select the desired line.

Pulse Mode

• Activate pulse function by pressing the Pulse Switch (11) shortly when the Pendulum lock (3) is in the unlocked position.
• Under pulse mode, the unit can match with a detector for working in a brighter environment.

Charging Tips

• The machine is equipped with a 3.7V lithium battery, which is removable.
• You can charge the machine directly, or take the battery out to charge it individually.
• If the battery is low or has no power to turn on, you should charge the machine directly with a Type-C cable.
• The battery indicator will flash during the charging process.
• The battery indicator will be displayed as solid when the battery is fully charged.

5. Specifications

6. Troubleshooting

The Laser Does Not Turn On

• Make sure the unit has power.
• If the laser unit is heated above 120°F (50°C), it will not turn on. If the laser has been stored in extremely hot temperatures, allow it to cool. The laser level will not be damaged by pressing the on/off button before cooling to its proper operating temperature.

The Laser Beams Flash

The lasers are designed to self-level up to an average of 3° in all directions. If the laser is tilted so much that the internal mechanism cannot level itself, the laser beams will flash indicating that the tilt range has been exceeded. THE FLASHING BEAMS CREATED BY THE LASER ARE NOT LEVEL OR PLUMB AND SHOULD NOT BE USED FOR DETERMINING OR MARKING LEVEL OR PLUMB. Try repositioning the laser on a more level surface.

The Laser Beams Will Not Stop Moving

The laser is a precision instrument. Therefore, if it is not positioned on a stable (and motionless) surface, the laser will continue to try to find level. If the beam will not stop moving, try placing the laser on a more stable surface. Also, try to make sure that the surface is relatively flat, so that the laser is stable.

Warranty Info

Your Warranty Includes

24-Month Coverage

Within 24 months of purchase, Fanttik will provide timely and effective online after-sales service. They will repair or replace any defective product (due to manufacturing fault).

How to Return Your Fanttik Product

Contact support@fanttik.com with your order number.

If your purchase was fulfilled by Amazon, please use Amazon's 30-day return service.

Company Information

METASEE LLC

5205 Broadway #634 Pearland Texas 77581

Website: www.fanttik.com

Email: support@fanttik.com

Made In China

Certifications: CE, FCC, FDA, ? [Read Manual], ♻️ [Recycling], ? [Do Not Dispose]