User Guide for arlo models including: All-in-One Sensor with 8 Sensing Functions, All-in-One Sensor, Sensor with 8 Sensing Functions, Sensor
Title: Arlo All-in-One Sensor Quick Start Guide Author: Arlo Technologies Subject: Arlo All-in-One Sensor Created Date: 8/25/2022 8:34:03 PM
File Info : application/pdf, 2 Pages, 779.73KB
DocumentDocument© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. Any other trademarks are for reference purposes. Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à arlo.com/docs. (If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs.) For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/. Arlo Technologies, Inc. 2200 Faraday Avenue, Suite 150 Carlsbad, CA 92008 USA August 2022 201-50587-03 Add an All-in-One Sensor to your Home Security System After you install your Keypad Sensor Hub, you can use the Arlo Secure App to add All-in-One Sensors. To install your All-in-One Sensor: 1. Open the Arlo Secure App and tap Add Device or + if you have other devices. 2. Follow the setup instructions for your All-in-One Sensor. Note: The sensor is for indoor use only. The Arlo Secure App shows you how to separate and reattach the front module from the back housing. Do not attach the sensor adhesive unless the app instructs you to do so. If you're using the sensor to detect water leaks, the adhesive isn't needed. What's in the box All-in-One Sensor Magnet with Adhesive Sensor Adhesive Need help? We are here for you. Visit www.arlo.com/support for quick answers and: · How-to videos · Troubleshooting tips · Additional support resources Flat Wall Plate with Short Screw and Anchor Corner Wall Plate with Long Screw and Anchor Note: Your sensor might not need a wall plate, depending on how it will be used. The Arlo Secure App explains this during setup.