FDS JV11459 Shoe Storage Cabinet

Important Safety Information

Please read all instructions carefully and retain them for future reference.

• Separate and count all parts and hardware before beginning assembly.
• Read through each step carefully and follow the proper order.
• It is recommended to assemble the product near its final intended location to avoid unnecessary movement once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials away from babies and children, as they can pose a choking hazard.

Assembly Instructions

Step 1: Prepare Main Panels

Insert cam lock pins (1) into the pre-drilled holes on panels A, C, D, and J. Then, insert cam locks (2, 3, 15) into the corresponding larger holes on panels A, C, D, and J. Connect panel A to panel C using cam locks (2, 15). Connect panel D to panel C using cam locks (2, 15). Connect panel J to panel C using cam locks (2, 15). Panel H is also shown being attached to panel C using cam locks (2).

Step 2: Assemble Main Frame

Attach panel B to the structure formed in Step 1 using cam locks (2, 15). Attach panel H to the structure using cam locks (2, 15). The diagram illustrates the proper orientation of the cam locks for both unlocking and locking. Ensure the cam lock arrow points towards the pin head when locking.

Step 3: Attach Side Panel D

Attach panel D to the side of the main cabinet structure. This is done using cam lock pins (1) inserted into panel D and cam locks (2) within the main structure, along with screws (10).

Step 4: Assemble Base Frame

Construct the base frame by connecting the U-shaped brackets (K) and metal rods (L) to the base panel (M). Secure these components using screws (12).

Step 5: Attach Base to Cabinet

Attach the assembled base frame (M) to the bottom of the main cabinet structure. Use screws (11, 18) and foot connectors (19) for this step.

Step 6: Secure Back Panel

Attach the back panel (D) to the rear of the cabinet structure. Use screws (6, 7) to secure it in place.

Step 7: Assemble Drawer/Door Units

Assemble the internal compartment units. This involves attaching the thin panels (F) to the larger side panels (G) using wooden dowels (14) and screws (13). Also, attach hardware (8, 9) to these components as shown in the diagram. Two identical units are assembled.

Step 8: Install Drawer/Door Units

Insert the assembled compartment units (from Step 7) into the main cabinet. Secure them to the cabinet's internal panels (C and G) using screws (17, 20).

Step 9: Install Compartment Panels

Install the compartment panels (E) inside the cabinet. The diagram shows that there are two possible mounting positions for each panel: a high position and a low position. Choose one position and secure the panel (E) using screws (13, 14).

Return / Damage Claim Instructions

Important: Do not discard the original box or packaging. If a return is required, the item must be sent back in its original packaging; otherwise, the return will not be accepted.

1. Take a photo of the box markings: A photo of the text markings on the side of the box is required for replacement parts. This helps identify the product number for correct part fulfillment.
2. Take a photo of the damaged part (if applicable): A photo of the damage is necessary to file a claim and process replacements or refunds quickly. Ensure you retain the original box, even if damaged.
3. Send an email with the images: Email the marketplace where the item was purchased, attaching the required photos and a description of the claim.