InFocus Quantum Laser Series Projector User Guide
Model Series: P120, P139, P140, P141
Product Models
The InFocus Quantum Laser Series includes several models, each with specific INL (InFocus Laser) part numbers:
- P120 - ADVANCED: INL4128, INL4129
- P139 - SUPERIOR: INL2156, INL2166, INL2158, INL2168, INL2159, INL2169
- P140 - CORE: INL144, INL154, INL146, INL156, INL148, INL158
- P141 - CORE II: INL164, INL174, INL166, INL176, INL168, INL178
- P141 - CORE II (Additional): INL184, INL194, INL186, INL196, INL188, INL198
Remote Control Layout
The projector remote control features the following buttons:
- Keystone
- Volume
- VGA 1 (Input Source)
- Page
- Mouse
- Video (Input Source)
- HDMI 3 (Input Source)
- Aspect Ratio
- Freeze
- Picture
- Zoom
- Mute
The remote also includes a numeric keypad (0-9) and function buttons for adjusting settings like Keystone (+/-), Volume (+/-), and Page (+/-).
Safety Instructions
General Operation & Environment:
- Projectors are designed for indoor use with InFocus lamps, laser, or LED light sources, InFocus ceiling mounts, and standard line voltages (100V-240V AC, 50/60 Hz).
- Use of unauthorized replacement light sources, outdoor operation, or different voltages is not tested and may cause damage or unsafe conditions.
- Designed for normal indoor environments with low dust.
Specifications:
- Voltage Supply: 100V - 240V AC; 50/60 Hz
- Operating & Storage Temperature: 0 to 40 C (32 to 104 F)
- Relative Humidity: 0 - 85% (non-condensing)
- Operating Altitude: 0 - 3050m (0 - 10000 feet) above sea level
⚠️ WARNING!
- Do not allow objects or liquids to enter the projector; this may cause fire or electric shock.
- To reduce fire or electric shock risk, do not expose the appliance to rain or moisture.
- Do not attempt to open, dismantle, or service the unit yourself. Covers may expose you to dangerous voltages, laser radiation, or other hazards.
? ATTENTION!
- Read and understand the full user guide before operating.
- Laser Classification: This product is classified as a CLASS 1 LASER PRODUCT - RISK GROUP 2 (IEC 60825-1:2014) or CLASS 3R (IEC 60825-1:2017) for international users. For U.S. users, it is a Class 3R laser product. Avoid direct eye exposure.
Additional Safety Precautions:
- Do not place the projector on an unstable surface to prevent damage or injury.
- Ensure the operating environment is free of smoke, grease, oil, and other contaminants.
- Install according to manufacturer instructions, away from heat sources (radiators, heaters, stoves, amplifiers).
- This equipment uses AC power susceptible to unstable conditions. Warranty does not cover damage from electrical surges; consider using a surge protector.
- Do not block air vents to prevent overheating and shutdown.
- Ensure the operating environment meets user guide requirements.
- Use only manufacturer-specified attachments/accessories and compatible carts, stands, tripods, brackets, or tables. Exercise caution when moving cart/apparatus combinations.
- Like any bright light source, do not stare into the direct beam (RG2 IEC 62471-5:2015) as it may harm your eyes.
- Turn off and unplug the projector before maintenance or installation.
- Remove batteries from the remote control before storage to prevent leakage of corrosive chemicals that can cause irritation or injury.
- Refer all servicing to qualified personnel. Servicing is required if the apparatus is damaged (power cord, plug, liquid spills, dropped objects, exposure to rain/moisture, abnormal operation, or drops).
- InFocus and the InFocus logo are trademarks of InFocus Corporation. Other trademarks belong to their respective owners.
- The symbol ♻️ on the product, accessories, or packaging indicates separate collection for waste electrical and electronic equipment. Dispose of the device responsibly via designated collection points to avoid environmental and public health hazards. Recycling conserves natural resources.
