Xhorse KEY TOOL MAX PRO User Manual

1. Overview

The KEY TOOL MAX PRO is a professional smart device with multi-function, Bluetooth, and WIFI communication interfaces integrated inside, which is convenient for connecting and controlling the Xhorse Key Cutting machine. It supports various OBD functions such as Vehicle diagnosis, Immo programming, Throttle program, TPMS, and Maintenance light reset.

The device features a compact design, suitable for professional automotive technicians. It is designed for ease of use and connectivity with other Xhorse tools.

2. Main Functions

• Immo Programming
• Vehicle Maintenance
• Remote Leakage Detection
• Remote Battery Voltage Detection
• Generate Remote and Smart key
• Program and Clone Immo Transponder
• Generate Special Transponder
• Renew Remote
• Recognize and Clone Accesscard
• Generate and Clone Garage Remote
• Frequency Detection and Clone Remote
• Connect to Xhorse Key Cutting Machine

3. Performance

• ? Battery capacity: 3375mAh
• ⏰ Battery life: > 6Hours
• ⏳ Stand time: > 5Days
• ⚡ Recharging current: 1.6A
• ? Brightness: >400nits
• ?️ Screen resolution: 1280*720P
• ? Camera resolution: 800W
• ? WiFi & Bluetooth: 802.11b/g/n & 4.0 BLE

4. Packing List

5. Appearance

The device features a high-frequency detection area and a low-frequency detection collector. It includes an Immo transponder placement hole, a status indicator, an ON/OFF button, a remote programming port, and a USB port.

Connected accessories include the OBD to DB15 cable with light, a MIC unit, and a leakage detection cable. The device also has a CMOS camera and an LED flashing light.

Device Components:

• High-frequency detection area
• Low-frequency detection collector
• Immo transponder placement hole
• Status indicator
• ON/OFF button
• Remote programming port
• USB port
• OBD to DB15 cable with light
• MIC
• OBD to DB15 port
• Leakage detection cable
• CMOS camera
• LED flashing light

6. Setting

6.1 First Time to use

For the first time to turn on the KEY TOOL MAX PRO, you need to select language, region (System default setting is China Standard Time Zone), connect to WIFI, and log in with a registered account. If you don't have an account, please register.

The device interface displays a language selection screen for initial setup.

6.2 Power Off

1. Before entering the system, press and hold the ON/OFF button for a while. 'Power off' and 'Reboot' options will be shown on the screen. Click on 'Power off' to shut down the device.
2. After entering the system, press and hold the ON/OFF button for a while. The interface displays the following icons. Click the 'Shut down' option to turn off the device.

The device interface shows power off and reboot options.

6.3 Connect to Key Cutting Machine

The KEY TOOL MAX PRO can connect to the Key Cutting Machine via Bluetooth. To operate: click on the interface [Select]. The interface displays the current connectable devices. Select the device to be connected according to its serial number.

The device interface shows a list of connectable devices for Bluetooth pairing.

6.4 Indicator status

• When the device is turned on or charging, the POW indicator light is on.
• When the device is working, the CON indicator is on.

6.5 Device reset

1. Press the ON/OFF button for 12 seconds; the device will restart automatically.
2. Press the ON/OFF button for about 1-2 seconds; the screen displays shutdown and restart options. Select the corresponding option to shut down or restart the device.

7. Maintenance

• Do not hit, shake, or throw the device violently.
• Do not wash the main body or other parts with water or other liquid directly. Do not clean the KEY TOOL MAX PRO with a wet cloth.
• Do not place the KEY TOOL MAX in high temperature, high humidity, or dusty places.
• Do not take the KEY TOOL MAX PRO apart or retrofit it privately, as this may damage the mainboard or cause the battery to catch fire.
• Please keep the screen, camera, and other key parts well-protected and prevent sharp objects from damaging them.
• The leakage detection and voltage detection functions are limited to the remote's leakage and voltage detection. Do not use these functions for detecting other products. All functions should be used strictly within the scope of the device's intended use; exceeding this scope may damage the device.

8. Warranty And After-Sale Instructions

The KEY TOOL MAX PRO comes with a one-year warranty, based on the date on the transaction voucher. If the voucher is unavailable or lost, the factory date recorded by the manufacturer will prevail.

Situations not covered by free maintenance:

• Damage caused by not following the use instructions.
• Damage caused by repairing or retrofitting in private.
• Damage caused by fall, crash, or inappropriate voltage.
• Damage caused by inevitable force.
• Damage caused by using the device in a harsh environment or on a vehicle and ship for a long time.
• Damage from the main body being dirty and worn due to use.

For after-sale and technical support, please contact your dealer or scan the QR code provided for instructions to download the Xhorse official APP.

Xhorse reserves all rights to this manual. Without permission, it is forbidden for any individual or organization to use any form of reproduction and dissemination of any part of this manual. Due to product improvements, the contents of this manual may be changed without notice.

Note: When the 125k frequency functions are used, the device operates as a mobile device.

Regulatory Information

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SAR Limit (USA/FCC): The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device type XDKMPO (FCC ID: 2A14T-XDKMPO) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 10CM from the body.

RF Exposure Compliance: To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10CM separation distance between the user's body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

CE/UKCA Statements

Declaration of Conformity: Hereby, Shenzhen Xhorse Electronics Co., Ltd. declares that the radio equipment type XDKMPO is in compliance with directive 2014/53/EU and RER 2017 (S 2017/1206).

Logos: UK, CA, CE

Specific Absorption Rate (SAR)

Your device is tested to comply with applicable requirements and regulations of the European Union/UK for human exposure to radio waves. Specific Absorption Rate (SAR) is used to measure radio waves absorbed by a body. The device complies with RF specifications when used at a distance of 0 mm from your body. The SAR limit is 2.0 W/kg averaged over 10 gram of tissue in the European Union/UK. This product was tested and recorded the maximum SAR value was 0.301W/kg for the body.

Do not use the device in environments with temperatures that are too high or too low. Never expose the device to strong sunshine or a very wet environment. The suitable temperature for the product is -20~60℃.

When charging, please place the device in an environment with normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature ranging from 5°C~25°C.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ⚠️

IC Statements

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: • This device may not cause interference, and • This device must accept any interference, including interference that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: • cet appareil ne peut pas provoquer d'interférences, et • cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels are below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 10cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.

Ce dispositif a été testé pour la conformité avec les valeurs SAR à un fonctionnement typique près du corps. Pour assurer que les niveaux d'exposition aux radiofréquences en deçà des niveaux testés, utiliser des accessoires avec cet équipement pour maintenir une distance de séparation minimale de 10cm entre le corps de l'utilisateur et l'appareil. Ces accessoires ne doivent pas contenir des composants métalliques. Il est possible que les accessoires utilisés près du corps qui ne répondent pas à ces exigences ne sont pas compatibles avec les limites SAR et il est conseillé d'éviter de les utiliser.