Everest PJ05 Full HD Projector

Introduction

Thank you for choosing the Everest PJ05 Full HD Projector. This document serves as your user manual and warranty certificate, providing essential information for setup, operation, and care.

Important Warnings

⚠️ Warning: To prevent electric shock, do not open the projector case. Customers cannot repair internal parts. Please contact professional maintenance personnel for any repairs.

Standard Accessories

The following accessories are typically included with your projector. Please note that some accessories may vary by region.

• Remote Control
• Power Cable
• User Manual

Interface Definition

The projector features the following ports on its rear or side panel:

• Power: For connecting the power cable.
• IR: Infrared receiver for the remote control.
• USB: For connecting USB storage devices or other peripherals.
• HDMI: High-Definition Multimedia Interface for digital audio/video input.
• AV: Analog audio/video input.
• Audio: Audio output port.

Remote Control Overview

The remote control allows you to operate the projector. Key buttons include:

• Power ?: Turns the projector on/off.
• Signal: Selects the input source.
• Navigation: Up ↑, Down ↓, Left ←, Right →, OK (to confirm selections).
• Menu: Accesses the main menu.
• Volume +/-: Adjusts audio volume.
• Mute: Silences the audio.
• Mouse: Activates mouse mode for navigation.
• Home: Returns to the main homepage.
• Back: Goes back to the previous screen.
• Focus +/-: Adjusts the focus of the projected image.

Installation

Choosing a Location

Before installing your projector, consider the following factors:

• Size and position of your projection screen.
• Location of the electrical power outlet.
• Location and distance between the projector and other equipment.

You can install your projector in the following ways:

1. Front-Desktop Installation

Place the projector on a flat surface (like a table or stand) near the floor in front of the screen. This is the most common method for quick setup and portability. After placing the projector, turn it on and navigate to: Setting > Projection Settings > Projection Method > Front-Desktop.

2. Front Ceiling Installation

Mount the projector to the ceiling in front of the screen. After mounting and turning on the projector, navigate to: Setting > Projection Settings > Projection Method > Front Ceiling.

Operation

Starting Up the Projector

1. Connect the power cable to the projector and a power outlet. Turn on the power outlet switch if available. The POWER indicator light on the projector will turn red when power is applied.
2. Press the power button on the projector or the remote control to start the projector. The lamp will light up, and the POWER indicator will turn blue. The fans will start operating, and a startup image will appear on the screen while the projector warms up. During the warm-up period, the projector may not respond to commands.

Note: Please use the supplied power cable to avoid potential dangers like electric shock and fire.

Signal Selection

Before accessing content from external devices, you need to select the correct input source. From the homepage, select the desired input source (e.g., Computer, TV, Set-top box, Game box, DVD). A drop-down selection menu will appear.

[Description of input selection menu screenshot showing various source options.]

Connecting Devices

Connecting HDMI Devices

HDMI (High-Definition Multimedia Interface) supports uncompressed video and audio data transmission between compatible devices over a single cable. Use an HDMI cable to connect devices such as laptops, DTV tuners, DVD players, Blu-ray players, and streaming devices (e.g., Chromecast, Fire TV).

[Description of HDMI connection diagram showing a laptop, projector, and HDMI cable.]

Connecting AV Devices

Connect devices with AV output, such as DVD players, DTV tuners, TV boxes, game consoles, and cameras, using the provided AV cables (Yellow for video, White for audio, Red for audio).

[Description of AV connection diagram showing projector and devices like TV Box, Game BOX, Camera, DVD/Blu-ray Player connected via colored AV cables.]

Homepage

The homepage provides access to various applications and sources. You can find icons for YouTube, Netflix, Google, File Explorer, Settings, Apps, and Source. To download new applications, click on the "App store".

[Description of homepage screenshot showing app icons for YouTube, Netflix, Google, etc.]

Eshare & AirPlay Mirroring

You can mirror your Android mobile/pad screen to the projector using WiFi Display technology. Ensure your iOS device is connected to the same network as your projector for screen mirroring.

[Description of Eshare/AirPlay mirroring interface screenshots showing mobile device mirroring options.]

Settings

The projector offers a comprehensive settings menu for customization:

• Basic Settings: General configuration options.
• Application Management: Manage installed applications.
• Software Versions: View current software version.
• Network Settings: Configure Wi-Fi and network connections.
• Bluetooth Settings: Connect Bluetooth devices.
• Projection Settings: Adjust installation mode, keystone correction, zoom, etc.
• Language Settings: Select your preferred display language.
• Date Settings: Set the current date and time.
• System Updates: Check for and install software updates.
• About this machine: View system information like version number and MAC address, and perform a Factory Data Reset.

WIFI Settings

Connect to a Wi-Fi network or set up a hotspot to enable online video streaming and other network features.

[Description of Wi-Fi settings menu screenshot showing available networks.]

Bluetooth

Connect compatible Bluetooth devices such as phones, speakers, or headphones.

[Description of Bluetooth settings menu screenshot showing pairing options.]

Projection Settings

Customize your projection experience. You can adjust the installation mode (e.g., front or rear projection), keystone correction (up/down, left/right, or four-point trapezoid), enable/disable automatic keystone correction, and adjust horizontal and vertical scaling using the infinite zoom feature.

[Description of projection settings menu screenshot with options for keystone and zoom.]

Language Settings

Users can choose from various available languages. The product defaults to the English version.

[Description of language settings menu screenshot displaying a list of languages.]

About this machine

This section provides information about the projector, including its version number and MAC address. You can also perform a Factory Data Reset from here.

[Description of "About this machine" screen showing system information and reset options.]

Safety Instructions

Please read and follow these safety instructions carefully:

• Use this product only for its intended purpose as described in this manual.
• Do not look directly into the projector lens while it is operating, as this can cause eye damage.
• Do not block the projector's ventilation holes with cloth or other materials, as this can cause overheating.
• This projector is not waterproof. Do not place liquids or containers (like vases or cups) near the projector.
• Store and use the projector in a dry and clean environment.
• If the projector will not be used for an extended period, turn it off and disconnect the power supply.
• When transporting the projector, use the original factory packaging and shockproof materials.
• If the projector is defective, do not attempt to repair it yourself. Contact your distributor or the factory directly.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the device. Incorrect repairs can lead to electric shock or injury.
• Keep the product away from high temperatures and humidity.
• Do not insert objects into the projector or spill liquids on it.
• Do not attempt to repair the projector by opening the covers; wait for authorized service personnel.
• The product has an estimated lifespan of 7 years.

Warranty Information

Warranty Terms:

• Keep the original packaging and purchase invoice for warranty service.
• Do not remove or damage labels and Serial Number (S/N) tags; products with unreadable serial numbers are not covered.
• Avoid dropping, impact, contact with water, or placing heavy objects on the projector. Physical damage, or damage due to dusty, humid, or hot environments, voids the warranty.
• This warranty card is valid only for the product model specified.
• Damage caused by voltage fluctuations, electrical installation issues, or improper grounding is not covered.
• Any physical intervention by unauthorized persons or entities will void the warranty.
• For issues, you can send the product to our technical service through your dealer.
• Ensure the warranty card is validated by the authorized seller upon purchase.

Technical Support for Damages:

Unauthorized service will void the warranty. Contact authorized technical service if:

• Liquid is spilled or an object enters the projector.
• The projector is exposed to water.
• The projector malfunctions or shows unexpected performance despite following operating instructions.
• The product has been dropped or damaged.

Examples of User Errors (Voiding Warranty):

• Using the product in ways not described in the manual.
• Operating in high temperature or humidity environments.
• Using unauthorized connection cables.
• Unauthorized modifications or additions by the user or third parties.
• Physical damage from external impacts or breakage.
• Tampering with or removing the serial number.
• Using non-original spare parts or consumables.
• Damage from natural disasters (fire, lightning, flood, earthquake, etc.).

Maintenance and Usage Rules:

• Use a dust cover in dusty environments.
• Do not remove the bottom screws.
• Do not press buttons forcefully.
• Do not spill liquids on the product.
• Do not place heavy objects on the product.

Transport Precautions:

• Carefully remove the projector from its box and keep all accessories in the box.
• Inspect the projector for any shipping damage. If damaged or not working, inform the seller immediately.
• If the device was shipped directly to you, notify the shipping company without delay. Only the recipient can claim for shipping damage.
• Keep the original box and packaging materials for future transport.
• Protect from fire and impacts; avoid exposure to moisture and dampness.

Manufacturer Information:

Manufacturer: Shenzhen Suntek Technology Co., Ltd

Address: Flat/Rm 170117/F, Henan Building. NO. 90, Jafee Road, Wanchai, China

Importer: Rampage Teknoloji A.Ş.

Address: Deliklikaya Mah. Fersah Cad. No:136 Arnavutköy/Istanbul/ Turkey

Tel: 444 7 899

Email: info@rampage.com.tr

Web: www.rampage.com.tr / www.segment.com.tr

Country of Origin: Made in P.R.C. (China)

Product Lifespan: 7 Years

EC Declaration of Conformity

Shenzhen Suntek Technology Co., Ltd declares that the Everest PJ05 Full HD Projector complies with relevant European Directives and has been tested against listed standards, including the Radio Equipment Directive 2014/53/EU.

CE Marking Year: 2015

Signed by: Shenzhen Suntek Technology Co., Ltd (represented by KELLY WANG, Engineer)

Conclusion

Thank you for reading!