PA Speakers and Subwoofers in Good Quality - PRORECK
Owner's Manual for DANCE models including: 12, 15, DANCE12 Portable 12 Inch Speaker, DANCE12, Portable 12 Inch Speaker, 12 Inch Speaker, Speaker
Proreck PR-C15 | 2000 Watt PA Speakers Box Online
File Info : application/pdf, 4 Pages, 444.86KB
DocumentDocumentOWNER' S MANUAL DANCE12/15 13 14 9 10 11 12 1 2 GRAPHIC EQUALIZER 2 14 5 6 7 8 MEMORY CARD MIC 1 IN MIC 2 IN 15 VOL- VOL+ FOLDER 3 21 FUNCTION BLUETOOTH EQUALIZER MICROPHONE RCA INPUT OUTPUT L L OUT IN R R 22 18 19 20 DANCE15 SPEAKER OUT 8 OH M LOCK LED LIGHTS POWER U LOCK PERSONAL 230V 115V AC115V~60Hz AC230V~50Hz MMAADDEEININCCHHININAA 16 17 1 saPlbeRsrOa@nRdrEe@CcKpkarAouUrdeDicoIkO..cc,IooNmmC WwwWwW..aRuEdCiKoApUroDrIOec.CkO.cMom 6 APPLICATION USES Bluetooth Usage 1 2 3 4 5 6 blUe 1.Turn on the power. 2.Turn the MP3 button to the minimal level. 3.Check the MP3/Line selector. If it is in "out" position,press it in. 4.Keep pushing the MODE button to find BLUE. 5.When in BLUE mode,the display will show BLUE. 6.Connect the device with BLUE function. 7.Turn the MP3 button to a suitable level respectively. When in the BLUE mode,you can connect your bluetooth device such as Ipad Iphone or PC to the amplifier. Note:Remember to turn up the volume of the connected device to a suitable level for a good sound effect. 7 MP3 SD and USB Insert Instrustions 1 2 3 4 5 MP3 OR 1.Turn on the power. 2.Turn the MP3 button to the minimal level. 3.Check the MP3/Line selector. If it is in "out" position,press it in. 4.Insert SD card or USB memory storage device. 5.Turn the MP3 button to a suitable level respectively. NOTE: cellphone,Ipad and PC can not be read by USB Port. You may connect them by BLUETOOTH or LINE IN function. 3 MIC Usage 1 2 MIC IN 3 4 MIC IN 1.Turn on the power. 2.Turn the MIC IN level button to the minimize level. 3.Use 1/4"input jack Mic to insert. 4.Turn the MIC IN button to a suitable level respectively. FM Usage 1 2 3 4 5 6 7 8 9 MP3 1053.53 1.Turn on the power. 2.Turn the MP3 button to the minimal level. 3.Check the MP3/Line selector. If it is in "out" position,press it in. 4.Keep pushing the MODE button to find FM 5.When in FM mode,the display will show FM channel. 6.Press once to search radio stations and they can be saved automatically. 7.Press once to jump previous FM channel. 8.Press once to jump next FM channel. 9.Turn the MP3 button to a suitable level respectively 4 LINE IN Mode There are 1 line input. on the back panel 1 2 3 4 MP3 5 MP3 1.Turn on the power. 2.Turn the MP3 button to the minimal level. 3.Check the MP3/Line selector. If it is in "in" position,press it out. 4.Connect the music source through RCA jack 5.Turn the MP3 button to a suitable level respectively. You can use the LINE IN function when you wish to link up an additional stereo signal source without the use of a mixer console, such as CD players, DVD music plays,MP3 players. Note:Remember to turn up the volume of the connect device to a suitable level for a good sound effect. LED Light Note The bulit-in LED lights only work with music rhythm at certain volumn level. P.S.If the lights don't work,please try turning up the volumn. 5 1. USB port:Use it to insert the USB memory storage device with MP3 files. 2. SD port:Use it to insert the SD card with MP3 files. 3. Remote receiver. 4. Input mode:Select an input mode,BLUE/FM/MP3 player. 5. Press once to jump previous song or FM channel. Press and hold to decrease the volume level. 6. Press once to jump next song or FM channel. Press and hold to increase the volume level. 7. It is repeat button. We provide 4 modes Repeat all/ Repeat one/Random/ Folder Repeat all. 8. Press once to play or pause a song(MP3 mode) Press and hold on to enter folder mode, the screen will show " FOLD". then press or to choose your favorable music folder. Press once to search radio stations and they can be saved automatically(FM mode). 9. Mic 1 level control:Use this control to set the volume level of Mic 1 IN signal. 10. Mic 2 level control:Use this control to set the volume level of MIC 2 IN signal. 11. MP3 level control:Use this control to set the volume level of Mp3 signal. 12. Equalizer:designed for 12db cut or boost. 13. Mic Input:1/4" connector for a unbalanced Microphone. 14. MP3/LINE IN Switch 15. Overload indicator:If the red LED ON constantly,low down the general volume control. 16. 115V-230V selector. 17. AC power:Use it to connect the AC power cord. 18. LED light switch.Note:The bulit-in LED lights only work with music rhythm at certain volumn level.P.S.If the lights don't work,please try turning up the volumn. 19. Speaker out:It is SPEAKON jack,use it to connect another passive speaker. 20. ON/Off power switch. 21. Line Output: Allow you to connect another active or mixer console through RCA jack speaker. 22.Line Input: Allow you to connect an external audio device through RCA jack. 2