VITTSJÖ TV Bench
Safety Warning
WARNING! Furniture tip-over can cause serious or fatal crushing injuries. To prevent tip-over, this furniture MUST be used with the wall attachment device(s) provided. Screws and plugs for the wall are NOT included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts Included
The following parts and hardware are typically included for assembly:
- Frame components (vertical supports, horizontal bars)
- Glass shelves
- Hardware:
- 6x Adjustable feet (Part numbers: 122158, 143131)
- 14x Assembly screws (Part numbers: 116654, 114676) - Used for wall strap and frame connections.
- 12x Panel/shelf securing screws (Part numbers: 123723, 124694) - Used for bottom panel and glass panels.
- 3x Plastic caps/covers (Part numbers: 107091, 123741)
- 10x Cable management clips (Part number: 123742)
- 1x Mesh back panel (Part number: 107967)
- 1x Connector/plate (Part number: 100823)
- Wall attachment strap
Assembly Instructions
- Step 1: Frame Assembly. Assemble the main frame by connecting vertical supports and horizontal bars.
- Step 2: Attach Lower Shelves. Place the lower glass shelves onto the designated supports within the frame.
- Step 3: Position Bottom Panel. Place the bottom panel onto the lower part of the frame structure.
- Step 4: Secure Bottom Panel. Fasten the bottom panel to the frame using 6x screws (Part numbers: 123723, 124694).
- Step 5: Install Shelf Supports. Insert the shelf support pins into the pre-drilled holes on the vertical frame supports for the middle shelves.
- Step 6: Attach Wall Strap. Secure the wall anchoring strap to the back of the unit using 5x screws (Part numbers: 116654, 114676).
- Step 7: Attach Top Frame. Attach the top frame section to the assembled unit using 6x screws (Part numbers: 122158, 143131).
- Step 8: Insert Back Panel. Slide the mesh back panel (Part number: 107967) into the rear grooves of the unit.
- Step 9: Secure Glass Panels. Fasten the glass panels to the frame using 6x screws (Part numbers: 123723, 124694).
- Step 10: Attach Glass Panels. Secure the glass panels using the connector (Part number: 100823).
- Step 11: Install Remaining Shelves. Place the remaining glass shelves onto their supports, using 3x plastic caps/covers (Part numbers: 107091, 123741).
- Step 12: Insert Glass Doors/Side Panels. Insert the glass doors or side panels into their final positions.
Final Adjustments and Safety
Adjust Feet: Use the 6x adjustable feet (Part numbers: 122158, 143131) to level the unit on your floor by rotating them as needed.
Cable Management: Utilize the 10x cable management clips (Part number: 123742) to organize and secure cables.
Wall Anchoring: For safety, it is crucial to secure the furniture to the wall using the provided anti-tip strap and appropriate wall fixings. This prevents the unit from tipping over, which could cause severe injury or death.
