Anko Cat Tower Cream

Product Overview

This document provides assembly instructions for the Anko Cat Tower Cream, a piece of pet furniture designed for cats.

Parts List

The following parts are included in the package:

• Board 1: 1PC SIZE 690mm x 610mm x 25mm
• Board 2: 1PC SIZE 610mm x 490mm x 25mm
• Box 3: 1PC
• Board 4: 1PC SIZE 690mm x 610mm x 25mm
• Board 5: 1PC SIZE 690mm x 610mm x 25mm
• Bar 6: 1PC
• Pet Bed 7: 1PC
• Pole 8: 4PCS SIZE L=470mm
• Pole 9: 2PCS SIZE L=240mm
• Pole 10: 1PC SIZE L=300mm
• Pole 11: 1PC SIZE L=300mm
• Pole 12: 1PC SIZE L=395mm
• Pole 13: 2PCS SIZE L=400mm
• Pole 14: 1PC SIZE L=750mm
• Pole 15: 1PC SIZE L=750mm
• Cushion 16: 1PC
• Rope 17: 1PC

Accessories:

Assembly Instructions

Step 1

Screw poles No.8 to the bottom interior of box No.3. Attach board No.2 to poles No.8 using screws A. Turn box No.3 upside down. Attach the bottom of box No.2 to board No.1 using screw D.

Refer to the diagram for visual guidance.

Step 2

Attach poles No.9 to the top of box No.3 with screws A. Attach pole No.14 and pole No.15 to board No.1 using screws A. Attach one corner of board No.4 to pole No.9 using screw A. Attach the other three corners of board No.4 to pole No.9, pole No.14, and pole No.15 using screws B. Then, screw poles No.13 and pole No.12 to board No.4 using screws B.

Refer to the diagram for visual guidance.

Step 3

Attach one corner of board No.5 and pet bed No.7 to pole No.12 using screw C. Attach the other corner of board No.5 to pole No.13 using screw A. Then attach the last corner and pole No.11 to pole No.13 with screw B. Attach pole No.10 to board No.5 using screw A. Attach bar No.6 to pole No.10 and pole No.11 using screws A. Subsequently, place cushion No.16 on top of bar No.6. Finally, screw rope No.17 to the bottom of board No.5.

Refer to the diagram for visual guidance.

WARNING

For your pet's safety, inspect regularly and remove if damaged. Always supervise your pet during play.