Fluke 106/107 Palmsized Digital Multimeters
Fluke 106 and 107 put measurements in the palm of your hand.
Technical Data
The Fluke 106 and 107 are compact, easy to use tools. These palm-sized digital multimeters deliver safe, reliable measurements time after time. The Fluke 106 and 107 are great products made to fit the way you work! These are the only Fluke digital multimeters designed to fit in the palm of your hand and go with you no matter where your job takes you.
Product Highlights
- Voltage, resistance, continuity, capacitance
- Input terminal for AC and DC current measurements to 10 A and current
- Data hold
- Backlit display (107 only)
- Diode test, plus frequency and duty cycle measurements (107 only)
Electrical Specifications
Accuracy is specified for 1 year after calibration, at operating temperatures of 18°C to 28°C, relative humidity at 0% to 75%. Accuracy specifications take the form of: ±([% of Reading] + [Number of Least Significant Digits])
| Function | Range | Resolution | Accuracy | |
| 106 | 107 | |||
| AC volts (40 Hz to 500 Hz)1 | 6.000 V 60.00 V 600.0 V | 0.001 V 0.01 V 0.1 V | 1.0%+3 | 1.0%+3 |
| DC volts | 6.000 V 60.00 V 600.0 V | 0.001 V 0.01 V 0.1 V | 0.5%+3 | 0.5%+3 |
| AC millivolts | 600.0 mV | 0.1 mV | 3.5%+3 | 3.0%+3 |
| Diode test2 | 2.000 V | 0.001 V | 10% | |
| Resistance (ohms) | 600.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ | 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ | 0.5%+3 0.5%+2 0.5%+2 0.5%+2 0.5%+2 1.5%+3 | 0.5%+3 0.5%+2 0.5%+2 0.5%+2 0.5%+2 1.5%+3 |
| Capacitance3 | 50.00 nF 500.0 nF 5.000 μF 50.00 μF 500.0 μF 1000 μF | 0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF | 2%+5 2%+5 5%+5 5%+5 5%+5 5%+5 | 2%+5 2%+5 5%+5 5%+5 5%+5 5%+5 |
| Frequency4 (10 Hz to 100 kHz) | 50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz | 0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz | NA | 0.1%+3 |
| Duty cycle5 | 0.1% to 99.9% | 0.1% | NA | 1% typical |
| AC current (40 Hz to 200 Hz) | 4.000 A 10.00 A | 0.001 A 0.01 A | 1.5%+3 | 1.5%+3 |
| DC current | 4.000 A 10.00 A | 0.001 A 0.01 A | 1.5%+3 | 1.5%+3 |
| Backlight | - | - | No | Yes |
1 All AC, Hz, and duty cycle are specified from 1% to 100% of range. Inputs below 1% of range are not specified.
2 Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
3 Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).
4 All AC, Hz, and duty cycle are specified from 1% to 100% of range. Inputs below 1% of range are not specified.
5 Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10% and 90%.
| Function | Overload protection | Input impedance (nominal) | Common mode rejection ratio | Normal mode rejection ratio |
| AC volts | 600 V1 | >10 MΩ <100 pF2 | >60 dB at dc, 50 Hz or 60 Hz | - |
| AC millivolts | 600 mV | >1 MΩ <100 pF | >80 dB at 50 Hz or 60 Hz | - |
| DC volts | 600 V1 | >10 MΩ <100 pF | >100 dB at dc, 50 Hz or 60 Hz | >45 dB at 50 Hz or 60 Hz |
1 6 x 105 V Hz Max.
2 For mV (AC), input impedance is approximately 1 MΩ.
Authorised Retailer
The document displays an image of a "Trusted Reseller" badge for Fluke in India, indicating authenticity and warranty support.
General Specifications
| Maximum voltage between any terminal and earth ground | 600 V |
| Display (LCD) | 6000 counts, updates 3/sec |
| Battery type | 2 AAA, NEDA 24A, IEC LR03 |
| Battery life | 200 hours minimum |
| Temperature | Operating: 0°C to 40°C Storage: -30°C to 60°C |
| Relative humidity | Operating Humidity: Non-condensing when <10°C ≤90% at 10°C to 30°C; ≤75% at 30°C to 40°C Operating Humidity, 40 MΩ Range: ≤80% at 10°C to 30°C; ≤70% at 30°C to 40°C |
| Altitude | Operating: 2000 m Storage: 12,000 m |
| Temperature coefficient | 0.1°C (specified accuracy)/°C (< 18°C or > 28°C) |
| Fuse protection for current inputs | 11 A, 1000 V Fast Fuse, Fluke specified part only |
| Size (HxWxL) | 142 mm x 69 mm x 28 mm |
| Weight | 200 g |
| IP rating | IEC 60529: IP 40 |
| Safety | IEC 61010-1: 600 V CAT III, Pollution Degree 2 |
| Electromagnetic environment | IEC 61326-1: portable |
| Electromagnetic compatibility | Applies to use in Korea only. Class A Equipment (Industrial broadcasting and communication equipment)1 |
| Warranty | One year |
1 This product meets requirements for industrial (Class A) electromagnetic wave equipment. Sellers or users should take notice of this. This equipment is intended for use in business environments and is not to be used in homes.
Ordering Information
- FLUKE-106 Digital Multimeter
- FLUKE-107 Digital Multimeter
Included Equipment
- TL75 Test leads
- 2 AAA Batteries (installed)
- User's manual
Fluke. The Most Trusted Tools in the World.
The document includes images illustrating how to identify genuine Fluke products, featuring a "Genuine Warranty" sticker and a hologram sticker on the packaging and the tool itself.
