AAON ASM02221 E-BUS Digital Room Temperature & Humidity Sensor (No LCD Display)

AAON Controls is involved in the design and selection of the sensors used with AAON units to ensure integration between sensors, controllers, software, and mechanical equipment.

Physical Specifications

Validating Information Provided by the Sensors to the Unit Controllers

The ASM02221 E-BUS Digital Room Sensor (No LCD Display) is used to sense Space Temperature & Space Humidity. The Sensor is supplied with a cover plate, a back plate, an optional mounting plate, and two mounting screws.

The sensor connects to the unit controller via an E-BUS cable of required length (Sold Separately).

Environmental Requirements

The E-BUS Digital Room Sensor needs to be installed in an environment that does not exceed a temperature greater than 120°F or less than 40°F and does not exceed 95% relative humidity levels (non-condensing).

Electrical and Environmental

Sensor ElementDigital Sensing Device
Sensor Reading RangeTemp: 40°F to 120°F, RH: 0-100%
Ambient Temperature Limits-40°F to 180°F
AccuracyTemp: +/- 0.8°F, RH: +/- 3%
ConnectionE-BUS
Weight3.2 oz

Installation

Mounting

The E-BUS Digital Room Sensor is designed to be mounted to a vertical 2" x 4" electrical box recessed in the wall. If the wall cannot be penetrated, a plastic surface mount box such as those made by Wiremold® may be used to mount the sensor to the wall surface.

The Sensor is mounted by removing the front cover and fastening the housing base to the electrical box using the supplied two 6-32 x 1" mounting screws. The E-BUS cable is then plugged into the E-BUS connector located on the circuit board that is mounted on the cover. The cover is then placed on the housing base, and the Allen Screw on the bottom of the base is adjusted to hold the cover in place.

Dimensions

Front View: Height: 4.55 inches, Width: 2.80 inches, Depth: 0.69 inches

Side View: Depth: 1.87 inches

Back View: Width: 0.81 inches, Height: 1.81 inches, Depth: 0.49 inches

E-BUS Connection Port

Remote Thermistor Sensor Connector

Contact AAON Support for Technical Assistance: www.aaon.com/contact

PDF preview unavailable. Download the PDF instead.

EBUS Digital Room Temp and Humidity Sensor (No LCD Display) Adobe PDF Library 17.0 Adobe InDesign 20.4 (Windows)

Related Documents

Preview AAON ASM01838 E-BUS Vertical Outdoor Air Temperature and Humidity Sensor
Detailed specifications and installation guide for the AAON ASM01838 E-BUS Vertical Outdoor Air Temperature and Humidity Sensor, designed for integration with AAON HVAC units.
Preview AAON E-BUS Digital Room Temperature & Humidity Sensor ASM01820
Technical specifications and installation guide for the AAON ASM01820 E-BUS Digital Room Temperature and Humidity Sensor. Details physical, electrical, and environmental requirements, along with mounting instructions.
Preview AAON ASM01836 E-BUS Horizontal Outdoor Air Temperature and Humidity Sensor
Technical specifications and installation guide for the AAON ASM01836 E-BUS Horizontal Outdoor Air Temperature and Humidity Sensor, detailing its electrical and environmental capabilities, and mounting instructions.
Preview AAON ASM01840 E-BUS Return Air Temperature and Humidity Sensor
Technical specifications and installation guide for the AAON ASM01840 E-BUS Return Air Temperature and Humidity Sensor, detailing its physical, electrical, and environmental characteristics for integration with AAON HVAC units.
Preview AAON ASM01829 Wall-Mounted E-BUS CO2 Space Sensor Specifications and Installation
Detailed specifications and installation guide for the AAON ASM01829 Wall-Mounted E-BUS CO2 Space Sensor, including physical and electrical characteristics, cable part numbers, and mounting instructions.
Preview AAON Duct-Mounted E-BUS CO2 Sensor ASM01831 Technical Specifications and Installation
Detailed specifications and installation guide for the AAON Duct-Mounted E-BUS CO2 Sensor ASM01831, designed for monitoring and controlling CO2 levels in building environments.
Preview AAON ASM01624 Strap-On Temperature Sensor Installation and Specifications
This document provides detailed information on the AAON ASM01624 Strap-On Temperature Sensor, including its physical and electrical specifications, mounting instructions, and compatibility with AAON control units. It is designed for monitoring temperatures of curved-faced pipes.
Preview AAON Building Static Pressure Sensor ASM01832 Technical Specifications
Detailed specifications and mounting instructions for the AAON Building Static Pressure Sensor ASM01832, a sensor designed to monitor building static pressure for optimal air pressurization.