Cokunst Portable Blender PSB-8 User Manual

Thank you for choosing the Cokunst Portable Blender. Please read this manual carefully before use.

Product Components

The Cokunst Portable Blender includes the following components:

Follow these steps to install the portable lid:

Insert the two small tentacles of the blue rod into the hole of the white rod.

Clean the blender before use.
Click the button once to check the power status.
Align the "LOCK arrow" on the bottle with the power button on the base when installing.
Refer to the lighting instructions for status indicators.
Do not put the base into the refrigerator or water.
This product is for juice making only; not suitable for blending hard objects like meat, nuts, or beans.
The blender cannot be disinfected by microwave or hot water above 122°F (50°C).
Keep the product away from children and mentally ill individuals.

Bottle not properly tightened: Flash red and blue for 2s.
Bottle tightened: Blue light is on.
Checking power: One blue light represents 25% power.
Blending: All indicator lights continuously flash in blue.
Low power while blending: All indicator lights flash in red.
Out of power: Indicator light(s) will flash slowly at current battery level.
Charging: All indicator lights will light up in blue.
Fully charged: All indicator lights will light up in blue.
Blades get stuck: Red light on for 5s.
Auto-stop blending after 30s: Flash red and blue for 3s.
Battery low voltage: Red light flashes quickly for 8s.

Tighten the bottle to the base until the "locking arrow" aligns with the power button.
Click the button to check power. Fully charge before use.
Remove the bottle from the base by aligning the "unlock arrow" with the power button.
Place fruit inside the bottle (cut into small pieces, 20% capacity).
Pour in milk or water (liquid at 60%, total not exceeding Max line).
Tilt the blender, long press the power button to start, and shake gently.
The blender auto-stops after 30 seconds. Unscrew the base, screw on the portable lid, and enjoy.

Method 1: Add 80% water and long press the button to clean automatically.
Method 2: Unscrew the lid and bottle, and clean with the included brush. Cover the waterproof cover of the charging port before cleaning. Do not touch the blade with hands.

Ensure blades stop running before cleaning.
Do not use dishwasher steel balls, abrasive cleaners, or corrosive liquids. Use the included cleaning brush for blades.
Clean the host part with flowing water and dry it promptly. Do not soak in water.
Store the product clean, dry, and in a ventilated place away from direct sunlight.

Malfunction	Analysis	Solution
Not working	Low power	Check power status. Charge if less than 25%.
	Bottle not properly tightened	Retighten until "LOCK arrow" aligns with power button.
	Blades get stuck	Turn upside down, long press power button, then shake gently.
	Ingredients added above MAX line	Remove some ingredients.
	Worked many times in a row	Wait 20 minutes and use normally.
Leakage	Bottle not properly tightened	Retighten until "LOCK arrow" aligns with power button.
	Base and bottle are separated	The blender has security protection; blades will not rotate.
Operation is incorrect	One-click to check power, long press to turn on.
No charged over a month	Please charge at least once a month to avoid battery damage.
Ingredients added are above the MAX line	Remove some ingredients.

If problems persist, scan the COKUNST after-sales QR code for help.