Cross slider FCSM
The channel slider for all load levels
Applications
A close-up view of the Fischer Cross Slider FCSM, a black component with a metal base and a plastic sliding surface. Another image shows pipes attached to a mounting system with visible thermal expansion joints.
- Heating pipes
- Cooling lines
- Steam pipes
- Hot water and circulation pipes
- Media lines with thermal expansion
- For indoor and outdoor application.
Advantages
- The simple connection of the FCSM Cross Slider with the FUS mounting channels by simply inserting and rotating by 45° also allows subsequent installation at any position.
- Due to the application as an upright slider in the FUS mounting channels, the FCSM is the universal cross slider substructure for all axial and roller sliders.
- The unique design and the use as a single glider or double glider enable a high load capacity.
- The low sliding friction of the plastic sliding surface minimizes resistance during lateral expansion.
Properties
- Material: steel
- Zinc plating: hot-dip galvanised
- Material plastic components: glass fiber reinforced polyamide
- Thermal capacity: -30 °C to +130 °C
Installation FCSM
Diagram illustrating the installation of the FCSM slider into FUS mounting channels, showing insertion and rotation steps.
Technical data
Technical illustration of the Fischer Cross Slider FCSM showing dimensions: M12 thread, 65 mm length, 40 mm width, 21 mm height, 2.0 mm thickness, and 65 mm overall width.
| Item | Item no. | Thread | Length [mm] | Width [mm] | Height [mm] | Thickness [mm] | Max. recommended static load (upright) [kN] | Static friction factor µh | Sliding friction factor µg | Sales unit [pcs] |
|---|---|---|---|---|---|---|---|---|---|---|
| FCSM M12 | 5679551) | M12 | 65 | 40 | 21 | 2.0 | 5.0 | 0.2 | 0.16 | 50 |
1) Max. recommended lever arm: with FASL and FASM: 200 mm; with FASH: 300 mm. Sliding and static friction values apply to galvanised and hot-dip galvanised FUS mounting channels.
