3-Piece Patio Rattan Furniture Set

Before You Start

Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. It is recommended that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady, and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Assembly Notice

1. Tighten screws to 50% before fixing all screws. An Allen key is recommended instead of an electric drill.
2. Place the item on flat ground to adjust and ensure it remains stable.
3. Gradually tighten all screws with tools.
4. If screws are not aligned with holes during assembly, loosen all other screws to 50% and continue the assembly process.
5. If the item is not stable, loosen all screws, adjust it on flat ground, and tighten all screws again.
6. Note: If one or some screws are fully tightened during assembly, the others may not align with holes. All holes are designed to be relatively larger to provide more space for screw adjustment.

Parts List

A: Right frame (x2)
B: Left frame (x2)
C: Seat frame (x2)
D: Back frame (x2)
E: Table leg frame (x2)
F: Table side frame (x2)
G: Seat cushion (x2)
H: Table glass (x1)

Hardware List

1: Bolt M6 x 30 mm (x16)
2: Bolt M6 x 35 mm (x14)
3: M6 x 1 Washers (x30)
4: Allen key M4 (x2) [⚙️]

Assembly Steps

Step 1: Chair Assembly (Part 1)

Connect Back frame (D) and Seat frame (C) using two Bolt M6 x 35 mm (2) and two M6 x 1 Washers (3).

Step 2: Chair Assembly (Part 2)

Connect the assembly from Step 1 with Right Frame (A) using two Bolt M6 x 30 mm (1), two Bolt M6 x 35 mm (2), and four M6 x 1 Washers (3).

Step 3: Chair Assembly (Part 3)

Connect the assembly from Step 2 with Left Frame (B) using two Bolt M6 x 30 mm (1), two Bolt M6 x 35 mm (2), and four M6 x 1 Washers (3).

Step 4: Complete Chair

Place Seat cushion (G) onto the assembled chair frame.

Step 5: Table Assembly (Part 1)

Connect Table leg frame (E) and Table side frame (F) using two Bolt M6 x 30 mm (1) and two M6 x 1 Washers (3).

Step 6: Table Assembly (Part 2)

Connect the assembly from Step 5 with Table side frame (F) using two Bolt M6 x 30 mm (1) and two M6 x 1 Washers (3).

Step 7: Table Assembly (Part 3)

Connect the assembly from Step 6 with Table leg frame (E) using two Bolt M6 x 30 mm (1) and two M6 x 1 Washers (3).

Step 8: Complete Table

Place Table Glass (H) onto the assembled table frame.

Finished Product

The 3-piece patio rattan furniture set is now assembled, consisting of two chairs and one table.