SOUNDPEATS TrueFree+

Manufacturer Information

Manufacturer: Shenzhen SoundSOUL Information Technology Company Limited

Address: Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109

Email: support@soundpeatsaudio.com

Website: www.soundpeatsaudio.com

Certifications

FCC ID: 2AFTUYL001 | Made in China

Certifications: FC, CE, PS, Japanese Mark (R211-181022)

Package Content

• 1. TrueFree+ Earbuds (Left and Right)
• 2. Charging Case
• 3. USB-C Charging Cable
• 4. Eartips (Sizes: L, M, S, XS)
• 5. User Manual

Specifications

Product Diagram

The product diagram illustrates the TrueFree+ earbuds and their charging case. It shows the left and right earbuds, the charging case with its lid open, a USB-C charging cable, and various sizes of eartips. Icons indicate button functions: a single tap (1x), a double tap (2x), and a long press (1s or 3s) on the Multi-Function Button (MFB) of the earbuds.

Button Control

Wearing

1. Identify the left and right earbuds.
2. Put the earbuds into your ears and adjust to find the best angle with the microphone downwards.

Get Started: Pairing

1. Take out both earbuds from the charging case. They will pair to each other automatically. The left indicator will go out, and the right indicator will flash red and white with a voice prompt "Pairing".
2. Activate Bluetooth on your device and select "SOUNDPEATS TrueFree+" from the Bluetooth list.
3. SOUNDPEATS TrueFree+ can remember previously paired devices and will automatically connect to the last device they were paired with after being taken out from the case. If they do not connect automatically, please select the pairing name from the Bluetooth list again.

Note:

• The earbuds support working alone. If the earbuds do not pair to each other within 30 seconds, they will enter pairing mode to search for a device.
• To force the earbuds into pairing mode and connect to another device, press and hold the MFB for 5 seconds while the earbuds are turned off.

Factory Reset

(Try these steps if you fail to establish a connection between the two earbuds, or between the earbuds and your device.)

1. Clear the pairing record between the earbuds and all your devices.
2. Place the earbuds back into the charging case and ensure the charging indicators light up. Press and hold both MFBs for 10 seconds until the white indicators flash 3 times.

Charging

SOUNDPEATS TrueFree+ is equipped with a charging case for easy carrying and charging. It can fully charge both earbuds for 9-10 times in total.

Charge the Earbuds

1. Place the earbuds back into the charging slot and ensure the charging contacts connect.
2. Charging starts with the red indicator turning on.
3. The white indicator will turn on and stay for 1 minute after the earbuds are fully charged.

Charge the Charging Case

1. When the charging case battery is running out, the last indicator will flash. Please charge the case then.
2. Please charge the case and earbuds at least once every 3 months when not in use for a long time.

Safety Note: To ensure charging safety, please do not use any USB charging adapter with a current over 5V 1A. Please do not use a quick charger to charge the earbuds and charging case. ⚠️

Warranty

We warrant this device for 12 MONTHS from the date of the original purchase for manufacturer defects.

Support Email: support@soundpeatsaudio.com

Website: www.soundpeatsaudio.com

Please scan the QR code or search the link below for a detailed PDF manual:

https://soundpeatsaudio.com/downloads/

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.