SAMSUNG

Introduction

This guide provides step-by-step instructions for unpacking and installing your Samsung television. Please follow these instructions carefully to ensure a safe and correct setup.

Step 1: Unpacking

Unpack the television and its accessories.

Identify the various ports on the rear panel: USB, OPTICAL, and HDMI (including support for eARC and ARC).

Step 2: Stand Attachment (Part 1)

Attach the first two components of the TV stand (labeled 1 and 2) to the back of the television using the provided M4 x L15 screws.

Step 3: Stand Attachment (Part 2)

Attach the main stand base (labeled 3) to the TV.

Ensure correct orientation by matching the indicators, as shown by a green checkmark (✔️). Avoid the incorrect orientation marked with a red cross (❌).

Step 4: Secure Stand Base

Secure the stand base to the TV, ensuring it is firmly locked into position.

Step 5: Stand Neck Attachment

Attach the stand neck or support piece (labeled 5) to the previously assembled stand base.

Step 6: Connect Stand Neck to Base

Connect the stand neck to the stand base, ensuring a stable connection.

Step 7: Attach Complete Stand

Attach the complete stand assembly to the back of the television, aligning the mounting points.

Step 8: Connect Cables

Connect necessary cables to the TV, including LAN for network connectivity and ANT for antenna input.

Step 9: Wall Mount Preparation

Prepare for wall mounting.

Note the VESA mounting pattern dimensions (600 x 400 mm) and the required screws (M4 x L15).

Step 10: Wall Mount Installation (General)

Mount the TV to the wall.

This involves attaching a wall mount bracket to the TV and then securing it to the wall. A general safety warning (AA symbol) is displayed.

Step 11: Attach Wall Bracket to TV

Attach the wall mount bracket components (labeled A, B, C, H) to the rear of the television using the appropriate screws.

Step 12: Mount TV on Wall Bracket

With the assistance of another person (indicated by two figures), carefully lift and mount the TV onto the wall bracket.

Exercise caution as indicated by the warning symbol (⚠️).

Step 13: Connect Final Cables

Connect essential cables, such as the power cord and HDMI cables, to the TV.

Step 14: Power On

Power on the television.

The power button is indicated by a power symbol (▶️).

Specifications and Dimensions

The following dimensions and specifications are for the 98-inch model:

VESA Mounting Information

VESA Mounting Pattern: 600 x 400 mm

Required Screws for Wall Mount: M8

Model Numbers: 98QN9*D, 98QND9* (* can be 0-9 or A-Z)