Europe DECLARATION OF CONFORMITY
User Manual for mi models including: Mi, Smart LED Desk Lamp Pro
User Manual Button Instructions Angle Adjustment Press down on the knob once to turn the lamp on or o˜. Turn the knob to adjust the lamp's brightness. Double press the knob to enable reading mode. (Can be customized in the app) Hold the knob down and turn it to adjust the lamp's color temperature. 45° 45° 45° 19° 19° 30° Using the Lamp
Read this manual carefully before use, and retain it for future reference. Connecting with Mi Home / Xiaomi Home App. Apple HomeKit Smart Control. This product ...
File Info : application/pdf, 1 Pages, 582.04KB
DocumentDocumentMi Smart LED Desk Lamp Pro User Manual EN Connecting with Mi Home / Xiaomi Home App This product works with Mi Home / Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home / Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home / Xiaomi Home" in the app Store to download and install it. Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Note: The version of the app might have been updated, please follow the instructions based on the current app version. Apple HomeKit Smart Control 1. Open the Home app on your iPhone or iPad. 2. Tap "Add Accessories" and follow the instructions in the app to scan the QR code on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access. * Make sure a Wi-Fi network with Internet access is available (this product does not support 5G networks). To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above. The HomeKit setup code is listed on the product base, do not lose it. After restoring factory settings, you will need the HomeKit setup code again to add the accessory. iPad and iPhone are the trademarks of Apple Inc., and they are registered in the United States and other countries. 05 EN Link a Lamp with Google Assistant Add the Mi Home / Xiaomi Home service to the Google Assistant app, to control devices connected to Mi Home / Xiaomi Home from Google Assistant. 1. Tap in the Google Assistant app, search for "Mi Home / Xiaomi Home", tap "Link", and sign in with your Xiaomi account. 2. Tap in Settings > Home control to add a device, and follow the on-screen instructions. Once the accounts are linked, you can control the Lamp from Google Assistant. Link a Lamp with Amazon Alexa Add the Mi Home / Xiaomi Home skill to the Amazon Alexa app, to control devices connected to Mi Home / Xiaomi Home from Amazon Alexa. 1. Tap in the Amazon Alexa app, then tap "Skills & Games", search for "Mi Home / Xiaomi Home", select the correct skill and tap "Enable". Then sign in with your Xiaomi account. 2. After successfully linking the accounts, tap DISCOVER DEVICES to add the device, and follow the on-screen instructions. Once the accounts are linked, you can control the Lamp from Amazon Alexa. Note: The name (Mi Home or Xiaomi Home) varies by selected language or regions. 06 EN Read this manual carefully before use, and retain it for future reference. Product Overview A B Recommended Max. Height: 400 mm Thank you for using the Mi Smart LED Desk Lamp Pro. Equipped with high-quality LEDs, the lamp features a professional optical design using a natural light mixing algorithm to deliver a uniform lighting experience. Structurally, it adopts a multi-angle adjustable design for a professional and comfortable lighting performance. This lamp is intended for use in studies, bedrooms, and other indoor areas. Under normal usage conditions, the lamp should be positioned so that the direction of the lamp head (indicated by points A and B) is parallel to the desktop. When the light emitting surface is level, the vertical distance between it and the desktop is 400 mm. 01 EN Using the Lamp Connect to Power Supply Plug the power cable into the charging port at the base and connect the adapter to a power supply. Lamp Head Power Port Lamp Body Adjustment Knob Power Adapter (LED Driver) 02 EN Button Instructions Press down on the knob once to turn the lamp on or off. Hold the knob down and turn it to adjust the lamp's color temperature. 03 Turn the knob to adjust the lamp's brightness. Double press the knob to enable reading mode. (Can be customized in the app) Angle Adjustment 45° 45° EN 45° 45° 19° 19° 30° 30° 04 EN Restoring Factory Settings The reset button is at the bottom of the lamp base. When the lamp is on, insert a straightened tool into the hole for 5 seconds, and release it when the light starts blinking slowly. The reset completes when the blinking stops. NoteTo use the lamp in a different network environment, restore it to the factory settings before connecting to the new network. Specifications Model: MJTD02YL Operating Temperature: -10°C to 35°C Power Factor: 0.5 Operating Humidity: 085% RH Color Rendering Index: Ra90 Rated Power: 14 W (Lamp + LED Driver) Service Life: Approx. 25000 h Rated Input: 220240 V~50/60 Hz 0.45 A Operating Frequency: Lamp Input: 12 V 1.0 A 24122472 MHz (Wi-Fi) Compatible with: Android 4.4 or iOS 9.0 and above 24022480 MHz (BT) Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz Maximum Output Power: 17.70 dBm (Wi-Fi) 4.19 dBm (BT) 07 EN Product Features Color Temperature Adjustment Brightness Adjustment Flicker Free Scheduled On/Off Large Area Lighting Multi-angle Adjustment Low Blue Light Content Ra High Color Rendering Index Reading Mode PC Mode Child Mode Focus Mode Mi Home/ Xiaomi Home App* Apple HomeKit Turn-off Delay Firmware Update 08 EN Warning Suitability for use "indoors", the related ambient temperature is 35°C. Please use the power resource correctly in the door. If in any doubt, consult a qualified electrician. Do not put the luminaire on the inclined plane. For indoor use only Class III Luminaire. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service engineer to avoid any risks to safety. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Do not disassemble the product. The light-emitting diode may cause damage to your eyes. Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user. EN EU Declaration of Conformity Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type MJTD02YL is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.mi.com/en/service/support/declaration.html. WEEE Disposal and Recycling All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. 09 10