DT Research | Rugged Tablets, Medical-Cart Computers and AIO ComputersDT Research | Rugged Tablets, Medical-Cart Computers and AIO Computers
User Guide for DT Research models including: 600-AX200NG, YE3600-AX200NG, YE3600AX200NG, 373T-MD, 373T-MD Rugged Tablet, Rugged Tablet, Tablet
DT Research, Inc. 600-AX200NG YE3600-AX200NG YE3600AX200NG 600 ax200ng
File Info : application/pdf, 7 Pages, 331.68KB
DocumentDocumentRugged Tablet
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 Copyright © 2023, DT Research, Inc. All Rights Reserved.
BOG040723 373T/MD C ENG
373T/MD
INTRODUCTION
Thank you for acquiring the 373T/MD, part of DT Research's line of Rugged tablets. Featuring a slim, robust enclosure, the 373T/MD with a 17" TFT display is powered by the Intel® processor, offering optimal combinations of performance and power savings. The 373T/MD is available with Microsoft® Windows® or Ubuntu operating system. Each software operating system features web browser, client/ server computing software, media player, accessories, and applications support.
PACKAGE CONTENTS
· One 373T/MD with Battery Pack, Handstrap, and VESA Bracket · AC-DC Power Adapter with Power Cord · Basic Operation Guide
B C
Input/Output Ports
A USB 3.0 Port B Headphone-out C Ethernet Port
Button Functions
BUTTON ACTION
1
Programmable Button
2
Power Button
3
Battery Latch
4
Service Door Latch
2
D USB Type-C Port E DC-in
Power/Battery LED Status:
· Blue indicates the battery is 25% to 100% charged · Blinking blue indicates the battery is charging · Orange indicates that the battery is between 11% to 25% · Blinking Orange indicates that the battery is below 10%
PRECAUTIONS
· Always exercise care when operating and handling the 373T/MD. · Do NOT apply excessive pressure to the display screen. · We recommend using the Digital Pen (optional) to keep the screen clean. · Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 373T/MD should face away from direct light to reduce glare. · If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufacturer or its partners. · In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the 373T/MD and disconnect all power sources. Report the problem to your device provider immediately. · Never attempt to disassemble the 373T/MD, as this will void the warranty.
BASIC FEATURES
The 373T/MD wireless tablet integrates a bright and multi-touch display, one USB port, and embedded networking elements such as wireless LAN and Bluetooth. The 373T/MD is complemented by a suite of accessories, including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience. A 373T/MD typically integrates an 802.11ax wireless LAN (WLAN) adapter that may connect to other wireless devices or access points. If your 373T/MD does not come with such a network adapter, please consult your device provider to establish the desired network connectivity.
3
OPERATION
Powering ON and OFF
To activate the 373T/MD, push and quickly release the Power Button. The display will come on in a few seconds. To put the 373T/MD in Standby mode, push and quickly release the Power Button. To turn the 373T/MD off for extended storage, power off safely using any software function that "shuts down computer" provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power--please use the AC-DC adapter with the 373T/MD when setting up for the first time to fully charge the internal battery pack. You may charge the external battery pack with it attached to the 373T/MD, or with the optional external battery charger kit.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack may have been drained substantially. Try unplugging/replugging the AC-DC adapter to the 373T/MD a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the tablet in "Standby" mode while not in use. Pushing briefly on the same button will wake up the system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the tablet--this form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal operation.
4
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.
Configuring the Tablet
The 373T/MD may be configured using the utilities and methods dictated by the software operating system. The 373T/MD should be configurable for various properties such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The 373T/MD is often delivered with an embedded (user-inaccessible) 802.11ax WLAN adapter equipped with a hidden custom antenna. · Through the support of typical WLAN adapters, the 373T/MD should be able to
detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection. · The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 373T/MD and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access. · When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc. · Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The 373T/MD offers the Bluetooth module which supports Bluetooth 5.2 standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which delivers faster speeds with low power consumption.
5
USING THE TABLET
Peripherals Support
Through its USB port, the 373T/MD supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, and system software recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.
Compatible with Rugged Carts
The 373T/MD rugged tablet is designed to be installed on a cart only, not for mobile application. The VESA bracket provides the convenience to mount 373T/MD on cart with screws. The purpose to install 373T/MT on cart only is to provide extra mobility together with peripheral I/O devices while still keep the advantage of powerful, large tablet to optimize and streamline the healthcare process for enhanced workflow and efficiency.
6
7
RF Exposure Information (RED & UKCA)
To be protected against all verified adverse effects, the separation distance of at least 0mm must be maintained between the antenna of the radio having max. 6.0dBi antenna and all persons.
Hereby, [DT Research, Inc.] declares that the radio equipment type [373T/MD] is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The full text of the EU and UK
declaration of conformity is available at the following internet address: http://www.dtresearch.com.
The functions of Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union
countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/N O/CH/IS/LI/UK(NI). Maximum EIRP for EU
Bluetooth:2402MHz-2480MHz
11.59dBm
Bluetooth LE:2402MHz-2480MHz
8.79dBm
Wifi: 2412MHz-2472MHz/2422MHz-2462MHz
19.82dBm
Wifi: 5150MHz-5725MHz
20.87dBm
Wifi: 5725MHz-5875MHz
13.82dBm
This equipment complies with Directive 2014/53/EU and UK Radio Equipment Regulations 2017 radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by European Union market(France). These requirements set a SAR limit of 2W/kg averaged over one gram of tissue. The highest SAR value 0.38 W/kg reported under this standard during product certification for use when properly worn on the body.
The equipment has been tested with radios set to their highest transmission levels with following setup:
Mode
use against the head
worn or carried against the torso of the body
Worn on limbs
Separation
/
0 mm
/
SAR Value
/
0.38 W/kg
/
Sar Limit
2W/kg (over 10 g)
2W/kg (over 10 g)
4W/kg (over 10 g)
Body-worn accessories (e.g., carry case, belt clip) containing metallic components which has not been tested or certified may change the RF performance of the device, including its compliance with RF exposure. User shall avoid using such accessories and should operate at least the above stated separation distance to maintain RF exposure compliance.
Operating authorizations must exist to operate the product in the following member states of the European Union, refer to the table below.
Importer Name: Concept International GmbH Importer Address: Zweibrückenstr. 5-7 80331 München Germany
6
7
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of thefollowing measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operatethis equipment.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating inconjunction with any other antenna or transmitter.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the FCC. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body, with 0mm separation.
FCC ID Label is in removable battery compartment, it could be easily found by removing the battery cover.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name:
Model No.: 373T/MD
Responsible Party U.S. Contact Information DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
6
7
IC Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 duCanada.
RF Exposure Compliance
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body, with 0mm separation. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. L'utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu pour répondre aux exigences d'exposition aux ondes radio établie par le développement énergétique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser lorsqu'il est correctement porté sur le corps, avec une séparation de 0mm.
The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5250 MHz for this device are restricted to indoor use only. Les fonctions des systèmes d'accès sans fil, y compris les réseaux locaux radioélectriques (WAS/RLAN), dans la bande 5150-5250 MHz de cet appareil sont limitées à une utilisation en intérieur.
6
7