GMKtec EVO-X2 Mini PC MPE RF Exposure Report

Product Information

Product Name: Mini PC

Brand Name: GMKtec

Model Name: EVO-X2

Series Model(s): EVO-X1, EVO-X3, EVO-X4, EVO-X5, EVO-X6, EVO-X7, EVO-X8, EVO-X9, EVO-X10, EVO-X11, EVO-X12, EVO-X13, EVO-X14, EVO-X15, EVO-X16, EVO-X17, EVO-X18, EVO-X19, EVO-X20, EVO-X2 Pro, EVO-X3 Pro, EVO-X4 Pro, EVO-X5 Pro, EVO-X2 PLUS, EVO-X3 PLUS, EVO-X4 PLUS, EVO-X5 PLUS

FCC ID: 2AXUD-EVO-X2

Test Standards: FCC 47CFR §2.1091

Disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd.

Test Report Details

Applicant/Manufacturer: Shenzhen GMK Technology Co., Ltd.

Address: 4/F, #9 Bldg, HuaLian Industrial Park, XinShi Community, Dalang St, Longhua Dist, Shenzhen, 518109, China

Product Description: Mini PC

Brand: GMKtec

Model Number: EVO-X2

Series Models: EVO-X1, EVO-X3, EVO-X4, EVO-X5, EVO-X6, EVO-X7, EVO-X8, EVO-X9, EVO-X10, EVO-X11, EVO-X12, EVO-X13, EVO-X14, EVO-X15, EVO-X16, EVO-X17, EVO-X18, EVO-X19, EVO-X20, EVO-X2 Pro, EVO-X3 Pro, EVO-X4 Pro, EVO-X5 Pro, EVO-X2 PLUS, EVO-X3 PLUS, EVO-X4 PLUS, EVO-X5 PLUS

Standards: FCC 47CFR §2.1091, 447498 D04 Interim General RF Exposure Guidance v01

Date of Test: 08 May 2025 - 14 May 2025

Date of Issue: 14 May 2025

Test Result: Pass

Testing Engineer: Aaron Bu

Technical Manager: Skylar Li

Authorized Signatory: Bovey Yang

Revision History

Rev.	Issue Date	Report No.	Effect Page	Contents
00	14 May 2025	STS2505017H01	ALL	Initial Issue

1. General Information

1.1 General Description of the EUT

Product Name: Mini PC

Brand: GMKtec

Model Name: EVO-X2

Model Difference: Only the model is different, the motherboard and the circuit are the same.

Product Description: The EUT is Mini PC.

Operation Frequency:

BT: 2402~2480 MHz
2.4G WLAN: 802.11b/g/n/ax 20: 2412~2462 MHz, 802.11n/ax(40MHz):2422~2452MHz
5G WLAN: 802.11a/n/ac/ax (20MHz): 5180~5240MHz, 802.11n/ac/ax(40MHz):5190~5230MHz, 802.11ac/ax (80MHz):5210MHz

Modulation Type:

BT: BR(1Mbps): GFSK, EDR(2Mbps): π/4-DQPSK, EDR(3Mbps): 8DPSK
2.4G WLAN: 802.11b(DSSS):CCK,DQPSK,DBPSK; 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM; 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM; 802.11ax(OFDM, OFDMA): BPSK,QPSK,16-QAM,64-QAM,256-QAM, 1024QAM
5G WLAN: 802.11a(OFDM):BPSK,QPSK,16-QAM,64-QAM; 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM; 802.11ac(OFDM): BPSK,QPSK,16-QAM,64-QAM,256-QAM; 802.11ax(OFDM, OFDMA): BPSK,QPSK,16-QAM,64-QAM,256-QAM, 1024QAM

Antenna gain:

BT: 1.49 dBi
2.4G WLAN: ANT 1:1.49dBi, ANT 2:1.49dBi, MIMO: 4.5 dBi
5G WLAN: ANT 1:1.88dBi, ANT 2:1.88dBi, MIMO: 4.89 dBi

Antenna Designation: PIFA

Power Rating: Input: DC 19.5V 11.8A

Adapter: Input: AC 100-240V, 50/60Hz, 4.0A, Output: DC 19.5V 11.8A 230.1W

Battery: N/A

Hardware Version: AXB35

Software Version: Windows11 24H2

1.2 Test Factory

Company: SHENZHEN STS TEST SERVICES CO., LTD

Address: 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao'an District, Shenzhen, Guang Dong, China

FCC test Firm Registration Number: 625569

IC test Firm Registration Number: 12108A

A2LA Certificate No.: 4338.01

2. FCC 47CFR §2.1091 REQUIREMENT

2.1 Test Standards

Follows the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculations for distance from the product to the MPE limit are performed using the provided formulas.

2.2 Limit

For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if:

The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A).
Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by:

Pth (mW) = { ERP20 cm (d/20 cm) if d ≤ 20 cm { ERP20 cm if 20 cm < d ≤ 40 cm

Where:

x = -log10 (60 / ERP20 cm√f) and f is in GHz;

ERP20 cm (mW) = { 2040f if 0.3 GHz ≤ f < 1.5 GHz { 3060 if 1.5 GHz ≤ f ≤ 6 GHz

d = the separation distance (cm);

(C) Or using the table below and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value).

RF Source frequency (MHz)	Threshold ERP(watts)
0.3-1.34	1,920 R²
1.34-30	3,450 R²/f²
30-300	3.83 R²
300-1,500	0.0128 R²f
1,500-100,000	19.2R²

For multiple RF sources: Multiple RF sources are exempt if:

The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(i)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(i)(A).
In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation.

Σ(Pi/Pth,i) + Σ(ERPj/ERPth,j) + Σ(Evaluatedk/Exposure Limitk) ≤ 1

Where:

a = number of fixed, mobile, or portable RF sources claiming exemption using paragraph (b)(3)(i)(B) of Part 1.1307 for Pth, including existing exempt transmitters and those being added.
b = number of fixed, mobile, or portable RF sources claiming exemption using paragraph (b)(3)(i)(C) of Part 1.1307 for Threshold ERP, including existing exempt transmitters and those being added.
c = number of existing fixed, mobile, or portable RF sources with known evaluation for the specified minimum distance including existing evaluated transmitters.
Pi = the available maximum time-averaged power or the ERP, whichever is greater, for fixed, mobile, or portable RF source i at a distance between 0.5 cm and 40 cm (inclusive).
Pth,i = the exemption threshold power (Pth) according to paragraph (b)(3)(i)(B) of this section for fixed, mobile, or portable RF source i.
ERPj = the ERP of fixed, mobile, or portable RF source j.
ERPth,j = exemption threshold ERP for fixed, mobile, or portable RF source j, at a distance of at least λ/2π according to the applicable formula of paragraph (b)(3)(i)(C) of Part 1.1307.
Evaluatedk = the maximum reported SAR or MPE of fixed, mobile, or portable RF source k either in the device or at the transmitter site from an existing evaluation at the location of exposure.
Exposure Limitk = either the general population/uncontrolled maximum permissible exposure (MPE) or specific absorption rate (SAR) limit for each fixed, mobile, or portable RF source k, as applicable from § 1.1310.

2.3 Test Result

Tune up

RF Function	Tune Up Power (dBm)	Tune Up Power (dBm)
BT	8±1	9
2.4G WLAN	13±1	14
5G WLAN	15±1	16

RF Function	Frequency (GHz)	Separation distance (cm)	Tune Up Power (dBm)	Tune Up Power (W)	Limit (W)	Ratio	Result
BT	2.402	20	9	0.008	0.768	0.010	Pass
2.4G WLAN	2.462	20	14	0.025	0.768	0.033	Pass
5G WLAN	5.24	20	16	0.040	0.768	0.052	Pass

Multiple transmission: BT+5G WLAN=0.01+0.052=0.062<1

Note: 1. The Maximum power is less than the limit, complies with the exemption requirements. 2. ERP=EIRP-2.15

END OF THE REPORT

	GMKtec EVO-X2 Mini PC Radio Test Report This report details the radio test results for the GMKtec EVO-X2 Mini PC, covering conducted and radiated emissions, bandwidth, power spectral density, and antenna requirements according to FCC Part 15.247 standards.
	GMKtec NucBox Test Report - FCC Compliance This test report details the compliance of the GMKtec NucBox, covering various RF performance and emission tests conducted according to FCC and ANSI standards. It includes results for conducted power, spectral density, bandwidth, and emissions.
	NucBox Test Report - GMKtec This test report details the compliance of the GMKtec NucBox with FCC CFR Title 47 Part 15C and ANSI C63.10:2013 standards, covering Bluetooth BR/EDR wireless functionality and EMC testing.
	NucBox Mini PC FCC Test Report - GMKtec Compliance Comprehensive FCC compliance test report for Shenzhen GMK Technology Co., Ltd's NucBox mini PCs, detailing results for models like M7, K8, G2, G3, and EVO series, tested by Shenzhen Tongzhou Testing Co.,Ltd. against FCC CFR Title 47 Part 15C and ANSI C63.10:2013 standards.
	GMKtec Mini PC Model Differences and Specifications Overview of Shenzhen GMK Technology Co., Ltd. Mini PC models, detailing shared electrical circuit design and component layouts across the EVO-T series and K12 series, highlighting only model name variations.
	GMKtec NUCBOX EVO-X2 User Manual and Technical Specifications Comprehensive user manual for the GMKtec NUCBOX EVO-X2 Mini PC, detailing its features, technical specifications, connection steps, safety precautions, and FCC compliance.
	GMKtec EVO-T1 Mini PC User Manual: Specifications and Setup Guide Comprehensive user manual for the GMKtec EVO-T1 Mini PC, detailing technical specifications, connection steps, BIOS settings, power modes, safety precautions, and compliance information.
	GMKtec EVO-T1 Mini PC: FCC ID and Product Label Information Detailed information from the product label of the GMKtec EVO-T1 Mini PC, including model name, manufacturer, FCC ID, input specifications, and compliance statements.

MPE Report