Security Cameras & Systems | Lorex USA – Lorex Corporation
User Guide for LOREX models including: W452AS-Z1, W452ASZ1, UCZ-W452AS-Z1, UCZW452ASZ1, W452AS Series 2K Outdoor Floodlight Camera, W452AS Series, 2K Outdoor Floodlight Camera
Lorex Technology Inc. W452AS-Z1 2K Outdoor Floodlight Camera UCZ-W452AS-Z1 UCZW452ASZ1 w452as z1
File Info : application/pdf, 2 Pages, 2.74MB
DocumentDocument2k Outdoor Floodlight Camera Package Contents HD Video Floodlight W452AS Series Quick Start Guide lorex.com Scan for Lorex Home APP Mounting Bracket Hooks Mounting Screws & Anchors (×3) A B Bracket Screws A and B (×2) Wire Caps (×3) Phillips Machine Screw Safety Precautions · Read this guide carefully and keep it for future reference. · Follow all instructions for safe use and handling of the product. · Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners. · Use the product within given temperature, humidity and voltage levels noted in the product's specifications. · Do not disassemble the floodlight. CAUTION Risk of fire. Do not install camera near flammable or combustible surfaces. Risk of electrical shock. Disconnect the power at the fuse box before installation. Disclaimers · Always follow code standards when installing wired connections. · This floodlight camera must be installed on a wall and a UL listed junction box. · This floodlight includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the floodlight. This clicking is normal, and indicates that the camera filter is working. · Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws. FCC Notice THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Need Help? Visit us online for up-to-date software and complete instruction manuals 1 Visit lorex.com 2 Search for the model number of your product 3 Click on your product in the search results 4 Click on the Downloads tab Copyright © 2020 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved. Product Overview Back Panel Light sensor Speaker PIR motion sensor Front Panel Top cover Adjusting knobs 11.4" 290mm IR LED Microphone Camera Memory slot* Reset button** 7.3" / 185mm Floodlights Behavior (steady) (flashing) (flashing rapidly) (steady) (flashing) (flashing rapidly) (alternating) LED Indicator Meaning Operating correctly. Ready for connection. Mobile device is attempting to connect to the camera. Device malfunction. Try resetting the camera and repeating the setup. Network connection failed. Try resetting the camera and repeating the setup. Memory slot error. Try removing and re-inserting the included memory slot card, or try a different card. Firmware upgrade in progress. 12.8" / 325mm * To access the memory slot and reset button, twist left to open the top cover. ** To reset the camera, hold down the reset button until the chime sounds and the LED Indicator turns red. V261LC_QSG_EN_R1.indd 1 STEP 1: Preparation Before assembly, there are important preparations to make. To prepare for installation: · TURN OFF POWER TO YOUR FLOODLIGHT CIRCUIT AT THE FUSEBOX TO ENSURE NO POWER IS BEING SENT. If you are unsure of which breaker controls the circuit, then turn off the main power switch. If you do not know where your breaker is or how to turn off power, consult a licensed electrician. · Verify that the supply voltage is correct. Connect fixture to a 100 VAC~240 VAC 50/60 Hz power source. · DO NOT connect floodlight to a dimmer switch or timer. · If you are not replacing a light fixture, you will need to run power cabling to the install location, and purchase a UL listed junction box for a licensed electrician to install. 32 Feet Recommendation: Mount the floodlight camera 10 feet (3 meters) high with the motion detector levelled to the ground for optimizal detection of human-sized objects as far as 32 feet (10 meters). The user manual for local area network devices shall contain instructions related to the restrictions mentioned in the above sections, namely that: (i) the maximum antenna gain permitted for devices in the bands 52505350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (ii) the maximum antenna gain permitted for devices in the band 57255825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (i)ÿle gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 MHz doivent respecter le pire limiter; et (ii)ÿle gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doivent respecter le pire limites spécifiées pour le point-à-point et l'exploitation non point à point, le cas échéant. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650 -5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. V261LC_QSG_EN_R1 2020-03-03 5:40:22 PM STEP 2: Secure the Mounting Bracket Next, install the floodlight's mounting bracket. 1. With the power shut off, remove the existing light fixture and bracket from the wall. 2. Disconnect the wires. To install directly to a junction box: 3. Run the wires through the middle of the supplied mounting bracket. 4. Secure the mounting bracket to your junction box using one of the bracket screws, A or B depending on which size fits. NOTE: Be sure to follow the "Front" / "Up" directions on the mounting bracket. To install directly on a wall: 3. Use the mounting bracket as a template to mark 3 holes in a triangular pattern. 4. Use a 1/4" drill bit to drill in the marked holes. 5. Gently tap the supplied mounting anchors into the drilled holes with a hammer. 6. Align the bracket and use a Phillips head screwdriver to secure the supplied mounting screws into the mounted anchors. STEP 3: Connect the Wires To wire the floodlight: 1 Hang the floodlight camera from the mounting bracket using the supplied hooks. 1. 2. A Hook one end into your floodlight camera. B Hook the other end into the bracket. 2 The copper wire from the camera is ground wire. Connect the ground wire to the existing ground wire inside of your junction box. Use the supplied wire cap. In the case that you are not wiring from a junction box, twist your ground wire around the green screw on the bracket. IMPORTANT: Properly ground fixture. 3 The white wire from the camera is neutral wire. Use a wire cap to connect the neutral wires from the camera and junction box. The black wire from your camera is a hot wire. Use a wire cap to connect the hot wires from the camera and junction box.* * Power wire colors in your home may be different. In such a case consult a licensed electrician. STEP 4: Secure the Floodlight Next, install the floodlight camera. 1. Carefully push all the wires through the middle opening of the bracket into the junction box, and secure the floodlight camera through the middle hole using the Phillips machine screw. In the case that you are installing the floodlight camera directly to the bracket, fit the wires into the back openings of the camera. 2. Adjust the lens and light angle using the adjusting knobs. 3. To enforce a water resistant seal, apply silicone compound around the entire perimeter where the junction box is attached to the bracket. 4. You may now restore power at the fusebox. NOTE: If the status LED on the floodlight camera does not turn on, check to make sure wiring is done correctly. STEP 5: In-app Setup Next, connect the floodlight camera to the Lorex Home app. To scan the QR code: 1. Download and install the free Lorex Home app from the App Store or Google Play Store. 2. Tap the Lorex Home icon to launch the app. Tap Sign up, then follow the on screen prompts to create an account. Record your account details below and store in a secure location: Email: Account Password: 3. Wait for the floodlight to start up. This may take up to 5 minutes after reconnecting power at the breaker. 4. Once the status LED on the floodlight is flashing green, tap + in the Lorex Home app. 5. Scan the QR code on the side of the floodlight camera using your mobile device's camera. NOTE: If your mobile device cannot scan the QR code, tap Manually enter Device ID. To link the floodlight: 1. Once the status LED on the floodlight is flashing green, tap Next in the Lorex Home app. The app will connect your mobile device to the floodlight's hotspot. 2. Create a secure password for the floodlight. Record your floodlight password below and store in a secure location: Floodlight Password: 3. Select your Wi-Fi network from the list, then enter the Wi-Fi password to connect your floodlight to the Internet. NOTE: If the Wi-Fi connection is weak, try moving your router closer or adding a Wi-Fi extender. 4. Once the status LED on the floodlight is solid green, tap Next to add the floodlight to your Lorex Home account. 5. Set a name for the floodlight and configure date & time preferences, then tap Complete. V261LC_QSG_EN_R1.indd 2 Overview of Lorex Home app Live viewing screen: Back to previous screen Device name Lorex Floodlight Device settings Play back recorded video Snapshot Manual recording Siren Light 2-way audio: tap to speak, tap again to disable Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matériel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 énoncée dans un autre environnement.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps. Pause / Play Viewing modes Streaming quality* Mute / Unmute Fullscreen * Change the streaming quality to SD (Standard Definition) to conserve bandwidth while watching live video. This will not impact the quality of recorded video. V261LC_QSG_EN_R1 2020-03-03 5:40:28 PM